Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=28797): Process ended prematurely: osmo-stp_10.42.42.5(pid=28797) [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28797)]
Standard Output
---------------------------------------------- trial-2358 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 10:53:58.619573 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:58.630194 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 10:53:58.758602 tst cs_paging_gprs_active.py: using LAC 20968 10:53:58.884815 tst cs_paging_gprs_active.py: using RAC 58 10:53:59.005560 tst cs_paging_gprs_active.py: using CellId 20968 10:53:59.124436 tst cs_paging_gprs_active.py: using BVCI 20969 10:53:59.147841 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.158564 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.169066 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.179644 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.190310 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.200713 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.211689 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.222315 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:53:59.232796 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:53:59.351921 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:53:59.632138 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:53:59.759592 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:54:00.077259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28787): Launched 10:54:00.345686 run iperf3-srv_10.42.42.10(pid=28788): Launched 10:54:00.534326 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:54:00.662394 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:54:01.020722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28789): Launched 10:54:01.312627 run iperf3-srv_10.42.42.10(pid=28790): Launched 10:54:01.521973 tst cs_paging_gprs_active.py:38: start network... 10:54:01.664938 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:54:02.259798 run create_hlr_db(pid=28791): Launched 10:54:02.436554 bus /sierra_2: Setting Powered False 10:54:03.458288 run create_hlr_db(pid=28791): Terminated: ok {rc=0} 10:54:03.868812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28793): Launched 10:54:04.179064 run osmo-hlr_10.42.42.2(pid=28794): Launched 10:54:04.301649 run osmo-stp_10.42.42.5: Starting osmo-stp 10:54:04.845338 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28796): Launched 10:54:05.153191 run osmo-stp_10.42.42.5(pid=28797): Launched 10:54:05.263850 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:54:05.803387 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28799): Launched 10:54:05.914007 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:54:06.182653 run patchelf(pid=28800): Launched 10:54:06.362406 run osmo-stp_10.42.42.5(pid=28797): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28797)] 10:54:06.492939 run osmo-stp_10.42.42.5(pid=28797): stdout: | (launched: 2022-12-09_10:54:05.000817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:06.625052 run osmo-stp_10.42.42.5(pid=28797): stderr: | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209105405175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:06.751989 run osmo-stp_10.42.42.5(pid=28797): stdout: | (launched: 2022-12-09_10:54:05.000817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:06.877922 run osmo-stp_10.42.42.5(pid=28797): stderr: | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209105405174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209105405175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209105405175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:07.024399 run patchelf(pid=28800): Terminating (SIGINT) 10:54:07.196717 run patchelf(pid=28800): Terminated: ok {rc=0} 10:54:07.228381 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28797): Process ended prematurely: osmo-stp_10.42.42.5(pid=28797) [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28797)] [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 10:54:07.237757 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:54:07.298431 run osmo-hlr_10.42.42.2(pid=28794): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28794)] 10:54:07.347714 run osmo-hlr_10.42.42.2(pid=28794): stdout: | (launched: 2022-12-09_10:54:04.026529) 10:54:07.397782 run osmo-hlr_10.42.42.2(pid=28794): stderr: | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209105404204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209105404216 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209105404227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209105404227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209105404227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:54:07.440390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28787): Terminating (SIGTERM) 10:54:07.480431 run iperf3-srv_10.42.42.10(pid=28788): Terminating (SIGTERM) 10:54:07.521890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28789): Terminating (SIGTERM) 10:54:07.562008 run iperf3-srv_10.42.42.10(pid=28790): Terminating (SIGTERM) 10:54:07.602290 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28793): Terminating (SIGTERM) 10:54:07.642534 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28796): Terminating (SIGTERM) 10:54:07.682707 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28799): Terminating (SIGTERM) 10:54:07.692088 --- ParallelTerminationStrategy: PID 28787 died... 10:54:07.746052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28787): Terminated: ok {rc=0} 10:54:07.755773 --- ParallelTerminationStrategy: PID 28788 died... 10:54:07.809310 run iperf3-srv_10.42.42.10(pid=28788): Terminated {rc=256} 10:54:07.819004 --- ParallelTerminationStrategy: PID 28789 died... 10:54:07.872454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28789): Terminated: ok {rc=0} 10:54:07.882125 --- ParallelTerminationStrategy: PID 28790 died... 10:54:07.935304 run iperf3-srv_10.42.42.10(pid=28790): Terminated {rc=256} 10:54:07.945044 --- ParallelTerminationStrategy: PID 28793 died... 10:54:07.998914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28793): Terminated: ok {rc=0} 10:54:08.008590 --- ParallelTerminationStrategy: PID 28796 died... 10:54:08.062148 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28796): Terminated: ok {rc=0} 10:54:08.071767 --- ParallelTerminationStrategy: PID 28799 died... 10:54:08.125831 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28799): Terminated: ok {rc=0} 10:54:08.210669 bus /gobi_0: Setting Powered False 10:54:09.319642 bus /gobi_0: Setting Powered False 10:54:10.429551 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28797): Process ended prematurely: osmo-stp_10.42.42.5(pid=28797) [trial-2358↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28797)]