Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=29452): Process ended prematurely: osmo-stp_10.42.42.5(pid=29452) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29452)]
Standard Output
---------------------------------------------- trial-2358 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 11:03:23.126602 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.138744 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:03:23.275522 tst iperf3.py: using LAC 21017 11:03:23.395141 tst iperf3.py: using RAC 107 11:03:23.514987 tst iperf3.py: using CellId 21017 11:03:23.635123 tst iperf3.py: using BVCI 21018 11:03:23.658145 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.669691 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.680868 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.692226 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.703338 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.714493 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.725735 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.736693 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:23.747945 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:03:24.042995 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:03:24.177332 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:24.509516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29444): Launched 11:03:24.786321 run iperf3-srv_10.42.42.10(pid=29445): Launched 11:03:24.982779 tst iperf3.py:8: start network... 11:03:25.117599 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:03:25.625855 run create_hlr_db(pid=29446): Launched 11:03:25.810984 bus /gobi_6: Setting Powered False 11:03:26.833868 run create_hlr_db(pid=29446): Terminated: ok {rc=0} 11:03:27.241343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29448): Launched 11:03:27.542304 run osmo-hlr_10.42.42.2(pid=29449): Launched 11:03:27.662057 run osmo-stp_10.42.42.5: Starting osmo-stp 11:03:28.193662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29451): Launched 11:03:28.494894 run osmo-stp_10.42.42.5(pid=29452): Launched 11:03:28.604850 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:03:29.131249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29454): Launched 11:03:29.238376 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:03:29.501501 run patchelf(pid=29455): Launched 11:03:29.677620 run osmo-stp_10.42.42.5(pid=29452): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29452)] 11:03:29.806163 run osmo-stp_10.42.42.5(pid=29452): stdout: | (launched: 2022-12-09_11:03:28.346339) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:29.934961 run osmo-stp_10.42.42.5(pid=29452): stderr: | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209110328512 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209110328512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209110328513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209110328513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:30.059649 run osmo-stp_10.42.42.5(pid=29452): stdout: | (launched: 2022-12-09_11:03:28.346339) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:30.182930 run osmo-stp_10.42.42.5(pid=29452): stderr: | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209110328511 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209110328512 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209110328512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209110328513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209110328513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:30.326944 run patchelf(pid=29455): Terminating (SIGINT) 11:03:30.495426 run patchelf(pid=29455): Terminated: ok {rc=0} 11:03:30.526609 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29452): Process ended prematurely: osmo-stp_10.42.42.5(pid=29452) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29452)] [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 11:03:30.535989 tst iperf3.py:8: Test FAILED (7.4 sec) 11:03:30.596556 run osmo-hlr_10.42.42.2(pid=29449): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29449)] 11:03:30.646098 run osmo-hlr_10.42.42.2(pid=29449): stdout: | (launched: 2022-12-09_11:03:27.393995) 11:03:30.696191 run osmo-hlr_10.42.42.2(pid=29449): stderr: | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209110327567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209110327579 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209110327587 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209110327587 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209110327588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:03:30.738813 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29444): Terminating (SIGTERM) 11:03:30.779073 run iperf3-srv_10.42.42.10(pid=29445): Terminating (SIGTERM) 11:03:30.819349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29448): Terminating (SIGTERM) 11:03:30.878607 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29451): Terminating (SIGTERM) 11:03:30.929670 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29454): Terminating (SIGTERM) 11:03:30.939153 --- ParallelTerminationStrategy: PID 29444 died... 11:03:30.993717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29444): Terminated: ok {rc=0} 11:03:31.003648 --- ParallelTerminationStrategy: PID 29445 died... 11:03:31.072892 run iperf3-srv_10.42.42.10(pid=29445): Terminated {rc=256} 11:03:31.083140 --- ParallelTerminationStrategy: PID 29448 died... 11:03:31.137550 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29448): Terminated: ok {rc=0} 11:03:31.147780 --- ParallelTerminationStrategy: PID 29451 died... 11:03:31.202109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29451): Terminated: ok {rc=0} 11:03:31.212369 --- ParallelTerminationStrategy: PID 29454 died... 11:03:31.266202 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29454): Terminated: ok {rc=0} 11:03:31.352524 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29452): Process ended prematurely: osmo-stp_10.42.42.5(pid=29452) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29452)]