Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24720): Process ended prematurely: osmo-stp_10.42.42.5(pid=24720) [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24720)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:14:41.218930 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.229919 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:14:41.389122 tst cs_paging_gprs_active.py: using LAC 20760 10:14:41.511159 tst cs_paging_gprs_active.py: using RAC 105 10:14:41.633697 tst cs_paging_gprs_active.py: using CellId 20760 10:14:41.754498 tst cs_paging_gprs_active.py: using BVCI 20761 10:14:41.778406 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.789301 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.799982 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.810962 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.821695 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.832516 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.843426 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.854392 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:14:41.865327 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:14:41.987101 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:14:42.269728 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:14:42.398356 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:14:42.720045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24710): Launched 10:14:42.986598 run iperf3-srv_10.42.42.10(pid=24711): Launched 10:14:43.173711 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:14:43.301482 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:14:43.620019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24712): Launched 10:14:43.885715 run iperf3-srv_10.42.42.10(pid=24713): Launched 10:14:44.072338 tst cs_paging_gprs_active.py:38: start network... 10:14:44.200062 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:14:44.697138 run create_hlr_db(pid=24714): Launched 10:14:44.874948 bus /gobi_6: Setting Powered False 10:14:45.896652 run create_hlr_db(pid=24714): Terminated: ok {rc=0} 10:14:46.330905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24716): Launched 10:14:46.745243 run osmo-hlr_10.42.42.2(pid=24717): Launched 10:14:46.907562 run osmo-stp_10.42.42.5: Starting osmo-stp 10:14:47.541527 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24719): Launched 10:14:47.852899 run osmo-stp_10.42.42.5(pid=24720): Launched 10:14:47.964360 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:14:48.503457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24722): Launched 10:14:48.612886 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:14:48.883381 run patchelf(pid=24723): Launched 10:14:49.062877 run osmo-stp_10.42.42.5(pid=24720): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24720)] 10:14:49.193990 run osmo-stp_10.42.42.5(pid=24720): stdout: | (launched: 2022-12-09_10:14:47.697498) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:14:49.324916 run osmo-stp_10.42.42.5(pid=24720): stderr: | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101447867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:14:49.451945 run osmo-stp_10.42.42.5(pid=24720): stdout: | (launched: 2022-12-09_10:14:47.697498) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:14:49.578107 run osmo-stp_10.42.42.5(pid=24720): stderr: | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101447867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101447867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101447868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:14:49.724644 run patchelf(pid=24723): Terminating (SIGINT) 10:14:49.897322 run patchelf(pid=24723): Terminated: ok {rc=0} 10:14:49.928742 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24720): Process ended prematurely: osmo-stp_10.42.42.5(pid=24720) [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24720)] [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:14:49.938221 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:14:49.998633 run osmo-hlr_10.42.42.2(pid=24717): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24717)] 10:14:50.047879 run osmo-hlr_10.42.42.2(pid=24717): stdout: | (launched: 2022-12-09_10:14:46.504104) 10:14:50.098044 run osmo-hlr_10.42.42.2(pid=24717): stderr: | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101446797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101446815 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101446828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101446828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101446828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:14:50.140903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24710): Terminating (SIGTERM) 10:14:50.181183 run iperf3-srv_10.42.42.10(pid=24711): Terminating (SIGTERM) 10:14:50.221465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24712): Terminating (SIGTERM) 10:14:50.261487 run iperf3-srv_10.42.42.10(pid=24713): Terminating (SIGTERM) 10:14:50.301534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24716): Terminating (SIGTERM) 10:14:50.341756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24719): Terminating (SIGTERM) 10:14:50.381783 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24722): Terminating (SIGTERM) 10:14:50.391143 --- ParallelTerminationStrategy: PID 24710 died... 10:14:50.444833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24710): Terminated: ok {rc=0} 10:14:50.454429 --- ParallelTerminationStrategy: PID 24711 died... 10:14:50.507337 run iperf3-srv_10.42.42.10(pid=24711): Terminated {rc=256} 10:14:50.516935 --- ParallelTerminationStrategy: PID 24712 died... 10:14:50.570230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24712): Terminated: ok {rc=0} 10:14:50.579876 --- ParallelTerminationStrategy: PID 24713 died... 10:14:50.632931 run iperf3-srv_10.42.42.10(pid=24713): Terminated {rc=256} 10:14:50.642602 --- ParallelTerminationStrategy: PID 24716 died... 10:14:50.696016 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24716): Terminated: ok {rc=0} 10:14:50.705775 --- ParallelTerminationStrategy: PID 24719 died... 10:14:50.758744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24719): Terminated: ok {rc=0} 10:14:50.768248 --- ParallelTerminationStrategy: PID 24722 died... 10:14:50.821520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24722): Terminated: ok {rc=0} 10:14:50.910498 bus /gobi_0: Setting Powered False 10:14:52.015841 bus /gobi_0: Setting Powered False 10:14:53.128389 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24720): Process ended prematurely: osmo-stp_10.42.42.5(pid=24720) [trial-2358↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24720)]