Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26795): Process ended prematurely: osmo-stp_10.42.42.5(pid=26795) [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26795)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:33:01.343235 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:01.358841 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:33:01.550227 tst cs_paging_gprs_active.py: using LAC 20856 10:33:01.676875 tst cs_paging_gprs_active.py: using RAC 201 10:33:01.803525 tst cs_paging_gprs_active.py: using CellId 20856 10:33:01.931115 tst cs_paging_gprs_active.py: using BVCI 20857 10:33:01.956794 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:01.968662 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:01.980360 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:01.992637 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:02.004405 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:02.016575 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:02.028853 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:02.040918 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:33:02.053073 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:33:02.200328 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:33:02.492393 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:33:02.620839 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:33:02.937111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26785): Launched 10:33:03.199822 run iperf3-srv_10.42.42.10(pid=26786): Launched 10:33:03.384875 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:33:03.512101 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:33:03.827346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26787): Launched 10:33:04.088879 run iperf3-srv_10.42.42.10(pid=26788): Launched 10:33:04.273873 tst cs_paging_gprs_active.py:38: start network... 10:33:04.400227 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:33:04.892237 run create_hlr_db(pid=26789): Launched 10:33:05.066320 bus /gobi_6: Setting Powered False 10:33:06.088598 run create_hlr_db(pid=26789): Terminated: ok {rc=0} 10:33:06.493487 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26791): Launched 10:33:06.798412 run osmo-hlr_10.42.42.2(pid=26792): Launched 10:33:06.913565 run osmo-stp_10.42.42.5: Starting osmo-stp 10:33:07.442723 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26794): Launched 10:33:07.748037 run osmo-stp_10.42.42.5(pid=26795): Launched 10:33:07.859091 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:33:08.390993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26797): Launched 10:33:08.498491 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:33:08.766992 run patchelf(pid=26798): Launched 10:33:08.944053 run osmo-stp_10.42.42.5(pid=26795): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26795)] 10:33:09.073570 run osmo-stp_10.42.42.5(pid=26795): stdout: | (launched: 2022-12-09_10:33:07.597381) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:33:09.202960 run osmo-stp_10.42.42.5(pid=26795): stderr: | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103307766 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:33:09.327955 run osmo-stp_10.42.42.5(pid=26795): stdout: | (launched: 2022-12-09_10:33:07.597381) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:33:09.452278 run osmo-stp_10.42.42.5(pid=26795): stderr: | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103307766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103307766 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103307767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:33:09.597571 run patchelf(pid=26798): Terminating (SIGINT) 10:33:09.767300 run patchelf(pid=26798): Terminated: ok {rc=0} 10:33:09.798847 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26795): Process ended prematurely: osmo-stp_10.42.42.5(pid=26795) [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26795)] [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:33:09.808195 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 10:33:09.868386 run osmo-hlr_10.42.42.2(pid=26792): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26792)] 10:33:09.917236 run osmo-hlr_10.42.42.2(pid=26792): stdout: | (launched: 2022-12-09_10:33:06.648469) 10:33:09.966663 run osmo-hlr_10.42.42.2(pid=26792): stderr: | �[0;m�[1;31m20221209103306824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209103306824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209103306824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209103306824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209103306825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209103306825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209103306837 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209103306846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209103306846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209103306846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:33:10.009017 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26785): Terminating (SIGTERM) 10:33:10.048635 run iperf3-srv_10.42.42.10(pid=26786): Terminating (SIGTERM) 10:33:10.088283 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26787): Terminating (SIGTERM) 10:33:10.127821 run iperf3-srv_10.42.42.10(pid=26788): Terminating (SIGTERM) 10:33:10.167552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26791): Terminating (SIGTERM) 10:33:10.207173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26794): Terminating (SIGTERM) 10:33:10.246880 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26797): Terminating (SIGTERM) 10:33:10.256015 --- ParallelTerminationStrategy: PID 26785 died... 10:33:10.309218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26785): Terminated: ok {rc=0} 10:33:10.318569 --- ParallelTerminationStrategy: PID 26786 died... 10:33:10.371262 run iperf3-srv_10.42.42.10(pid=26786): Terminated {rc=256} 10:33:10.380810 --- ParallelTerminationStrategy: PID 26787 died... 10:33:10.434050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26787): Terminated: ok {rc=0} 10:33:10.443639 --- ParallelTerminationStrategy: PID 26788 died... 10:33:10.497250 run iperf3-srv_10.42.42.10(pid=26788): Terminated {rc=256} 10:33:10.507035 --- ParallelTerminationStrategy: PID 26791 died... 10:33:10.560215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26791): Terminated: ok {rc=0} 10:33:10.570374 --- ParallelTerminationStrategy: PID 26794 died... 10:33:10.624367 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26794): Terminated: ok {rc=0} 10:33:10.634046 --- ParallelTerminationStrategy: PID 26797 died... 10:33:10.687303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26797): Terminated: ok {rc=0} 10:33:10.772103 bus /gobi_0: Setting Powered False 10:33:11.880936 bus /gobi_0: Setting Powered False 10:33:12.991661 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26795): Process ended prematurely: osmo-stp_10.42.42.5(pid=26795) [trial-2358↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26795)]