Failed
gprs:trx-umtrx+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26706): Process ended prematurely: osmo-stp_10.42.42.5(pid=26706) [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26706)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-umtrx+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 10:31:51.249241 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.261323 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:31:51.409054 tst ping_idle_ping.py: using LAC 20850 10:31:51.536161 tst ping_idle_ping.py: using RAC 195 10:31:51.659318 tst ping_idle_ping.py: using CellId 20850 10:31:51.779853 tst ping_idle_ping.py: using BVCI 20851 10:31:51.803241 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.814187 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.825082 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.836247 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.847283 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.858419 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.869759 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:31:51.880863 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:31:52.178062 tst ping_idle_ping.py:24: start network... 10:31:52.313844 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:31:52.828921 run create_hlr_db(pid=26700): Launched 10:31:53.018071 bus /gobi_6: Setting Powered False 10:31:54.039176 run create_hlr_db(pid=26700): Terminated: ok {rc=0} 10:31:54.456494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26702): Launched 10:31:54.785612 run osmo-hlr_10.42.42.2(pid=26703): Launched 10:31:54.902679 run osmo-stp_10.42.42.5: Starting osmo-stp 10:31:55.473877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26705): Launched 10:31:55.799729 run osmo-stp_10.42.42.5(pid=26706): Launched 10:31:55.917786 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:31:56.486796 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26708): Launched 10:31:56.603340 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:31:56.888287 run patchelf(pid=26709): Launched 10:31:57.080155 run osmo-stp_10.42.42.5(pid=26706): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26706)] 10:31:57.219336 run osmo-stp_10.42.42.5(pid=26706): stdout: | (launched: 2022-12-09_10:31:55.639360) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:31:57.359144 run osmo-stp_10.42.42.5(pid=26706): stderr: | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103155829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:31:57.494568 run osmo-stp_10.42.42.5(pid=26706): stdout: | (launched: 2022-12-09_10:31:55.639360) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:31:57.628542 run osmo-stp_10.42.42.5(pid=26706): stderr: | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103155828 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103155829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103155829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:31:57.783999 run patchelf(pid=26709): Terminating (SIGINT) 10:31:57.966828 run patchelf(pid=26709): Terminated: ok {rc=0} 10:31:58.000069 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26706): Process ended prematurely: osmo-stp_10.42.42.5(pid=26706) [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26706)] [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27] 10:31:58.010056 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 10:31:58.075470 run osmo-hlr_10.42.42.2(pid=26703): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26703)] 10:31:58.128256 run osmo-hlr_10.42.42.2(pid=26703): stdout: | (launched: 2022-12-09_10:31:54.623135) 10:31:58.181753 run osmo-hlr_10.42.42.2(pid=26703): stderr: | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209103154819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209103154832 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-umtrx+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209103154841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209103154841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209103154841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:31:58.227421 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26702): Terminating (SIGTERM) 10:31:58.270377 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26705): Terminating (SIGTERM) 10:31:58.313499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26708): Terminating (SIGTERM) 10:31:58.323878 --- ParallelTerminationStrategy: PID 26702 died... 10:31:58.381681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26702): Terminated: ok {rc=0} 10:31:58.392232 --- ParallelTerminationStrategy: PID 26705 died... 10:31:58.449427 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26705): Terminated: ok {rc=0} 10:31:58.459748 --- ParallelTerminationStrategy: PID 26708 died... 10:31:58.516818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26708): Terminated: ok {rc=0} 10:31:58.604398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26706): Process ended prematurely: osmo-stp_10.42.42.5(pid=26706) [trial-2358↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26706)]