Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31955): Process ended prematurely: osmo-stp_10.42.42.5(pid=31955) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31955)]
Standard Output
---------------------------------------------- trial-2359 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 11:27:30.460514 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:30.472145 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:27:30.617968 tst ping_idle_ping.py: using LAC 21142 11:27:30.738004 tst ping_idle_ping.py: using RAC 232 11:27:30.883186 tst ping_idle_ping.py: using CellId 21142 11:27:31.037097 tst ping_idle_ping.py: using BVCI 21143 11:27:31.064865 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.077632 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.091362 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.104826 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.118936 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.132397 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.146796 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:27:31.160660 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:27:31.470414 tst ping_idle_ping.py:24: start network... 11:27:31.612648 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:27:32.155427 run create_hlr_db(pid=31949): Launched 11:27:32.353077 bus /gobi_6: Setting Powered False 11:27:33.371556 run create_hlr_db(pid=31949): Terminated: ok {rc=0} 11:27:33.785713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31951): Launched 11:27:34.093239 run osmo-hlr_10.42.42.2(pid=31952): Launched 11:27:34.210625 run osmo-stp_10.42.42.5: Starting osmo-stp 11:27:34.751694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31954): Launched 11:27:35.059331 run osmo-stp_10.42.42.5(pid=31955): Launched 11:27:35.170345 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:27:35.711399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31957): Launched 11:27:35.821437 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:27:36.091285 run patchelf(pid=31962): Launched 11:27:36.272263 run osmo-stp_10.42.42.5(pid=31955): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31955)] 11:27:36.404075 run osmo-stp_10.42.42.5(pid=31955): stdout: | (launched: 2022-12-09_11:27:34.907650) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:27:36.536719 run osmo-stp_10.42.42.5(pid=31955): stderr: | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112735080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:27:36.664252 run osmo-stp_10.42.42.5(pid=31955): stdout: | (launched: 2022-12-09_11:27:34.907650) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:27:36.790404 run osmo-stp_10.42.42.5(pid=31955): stderr: | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112735079 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112735080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112735080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:27:36.938433 run patchelf(pid=31962): Terminating (SIGINT) 11:27:37.113399 run patchelf(pid=31962): Terminated: ok {rc=0} 11:27:37.145084 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31955): Process ended prematurely: osmo-stp_10.42.42.5(pid=31955) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31955)] [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 11:27:37.153797 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 11:27:37.214700 run osmo-hlr_10.42.42.2(pid=31952): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31952)] 11:27:37.264572 run osmo-hlr_10.42.42.2(pid=31952): stdout: | (launched: 2022-12-09_11:27:33.942251) 11:27:37.315293 run osmo-hlr_10.42.42.2(pid=31952): stderr: | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209112734119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209112734131 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209112734140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209112734141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209112734141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:27:37.358420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31951): Terminating (SIGTERM) 11:27:37.398961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31954): Terminating (SIGTERM) 11:27:37.439430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31957): Terminating (SIGTERM) 11:27:37.448758 --- ParallelTerminationStrategy: PID 31951 died... 11:27:37.502724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31951): Terminated: ok {rc=0} 11:27:37.512489 --- ParallelTerminationStrategy: PID 31954 died... 11:27:37.566513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31954): Terminated: ok {rc=0} 11:27:37.576307 --- ParallelTerminationStrategy: PID 31957 died... 11:27:37.630199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31957): Terminated: ok {rc=0} 11:27:37.720937 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31955): Process ended prematurely: osmo-stp_10.42.42.5(pid=31955) [trial-2359↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31955)]