Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 30 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7120): Process ended prematurely: osmo-stp_10.42.42.5(pid=7120) [trial-2360↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7120)]

Standard Output

----------------------------------------------
trial-2360 gprs:sysmo ping.py
----------------------------------------------
12:52:33.341661 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.352933 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
12:52:33.478516 tst                          ping.py: using LAC 21587
12:52:33.597769 tst                          ping.py: using RAC 167
12:52:33.716243 tst                          ping.py: using CellId 21587
12:52:33.842105 tst                          ping.py: using BVCI 21588
12:52:33.865372 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.875918 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.886552 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.897021 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.907388 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.917760 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.928662 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:52:33.939345 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
12:52:34.215524 tst                       ping.py:19: start network...
12:52:34.342072 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:52:34.832428 run          create_hlr_db(pid=7112): Launched
12:52:35.008649 bus                          /gobi_6: Setting Powered False
12:52:36.028931 run          create_hlr_db(pid=7112): Terminated: ok {rc=0}
12:52:36.465949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7116): Launched
12:52:36.795495 run    osmo-hlr_10.42.42.2(pid=7117): Launched
12:52:36.915323 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:52:37.487107 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7119): Launched
12:52:37.815922 run    osmo-stp_10.42.42.5(pid=7120): Launched
12:52:37.934713 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:52:38.508253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7122): Launched
12:52:38.624610 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:52:38.911464 run               patchelf(pid=7123): Launched
12:52:39.103049 run    osmo-stp_10.42.42.5(pid=7120): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7120)]
12:52:39.243599 run    osmo-stp_10.42.42.5(pid=7120): stdout: 
| (launched: 2022-12-09_12:52:37.653322)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:52:39.384054 run    osmo-stp_10.42.42.5(pid=7120): stderr: 
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209125237848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:52:39.519480 run    osmo-stp_10.42.42.5(pid=7120): stdout: 
| (launched: 2022-12-09_12:52:37.653322)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:52:39.654203 run    osmo-stp_10.42.42.5(pid=7120): stderr: 
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209125237848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209125237848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209125237849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:52:39.809906 run               patchelf(pid=7123): Terminating (SIGINT)
12:52:39.992106 run               patchelf(pid=7123): Terminated: ok {rc=0}
12:52:40.026404 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7120): Process ended prematurely: osmo-stp_10.42.42.5(pid=7120) [trial-2360↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7120)]  [trial-2360↪gprs:sysmo↪ping.py:22]
12:52:40.035653 tst                       ping.py:22: Test FAILED (6.7 sec)
12:52:40.104143 run    osmo-hlr_10.42.42.2(pid=7117): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7117)]
12:52:40.156706 run    osmo-hlr_10.42.42.2(pid=7117): stdout: 
| (launched: 2022-12-09_12:52:36.632127) 
12:52:40.209975 run    osmo-hlr_10.42.42.2(pid=7117): stderr: 
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209125236832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209125236845 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209125236853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209125236853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209125236853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:52:40.255294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7116): Terminating (SIGTERM)
12:52:40.298447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7119): Terminating (SIGTERM)
12:52:40.341633 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7122): Terminating (SIGTERM)
12:52:40.351572 ---      ParallelTerminationStrategy: PID 7116 died...
12:52:40.408745 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7116): Terminated: ok {rc=0}
12:52:40.419009 ---      ParallelTerminationStrategy: PID 7119 died...
12:52:40.475447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7119): Terminated: ok {rc=0}
12:52:40.485889 ---      ParallelTerminationStrategy: PID 7122 died...
12:52:40.542666 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7122): Terminated: ok {rc=0}
12:52:40.630860 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7120): Process ended prematurely: osmo-stp_10.42.42.5(pid=7120) [trial-2360↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7120)]