Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24320): Process ended prematurely: osmo-stp_10.42.42.5(pid=24320) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24320)]
Standard Output
---------------------------------------------- trial-2361 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 16:49:43.916744 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:43.928911 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:49:44.064156 tst iperf3.py: using LAC 22400 16:49:44.181224 tst iperf3.py: using RAC 215 16:49:44.305731 tst iperf3.py: using CellId 22400 16:49:44.421576 tst iperf3.py: using BVCI 22401 16:49:44.444377 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.455775 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.466995 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.478162 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.489266 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.500333 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.511522 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.522497 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:44.533783 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:44.810918 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:49:44.934972 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:45.245455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24312): Launched 16:49:45.502062 run iperf3-srv_10.42.42.10(pid=24313): Launched 16:49:45.683298 tst iperf3.py:8: start network... 16:49:45.806726 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:49:46.341486 run create_hlr_db(pid=24314): Launched 16:49:46.517800 bus /gobi_6: Setting Powered False 16:49:47.534985 run create_hlr_db(pid=24314): Terminated: ok {rc=0} 16:49:47.934729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24316): Launched 16:49:48.234229 run osmo-hlr_10.42.42.2(pid=24317): Launched 16:49:48.352425 run osmo-stp_10.42.42.5: Starting osmo-stp 16:49:48.879477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24319): Launched 16:49:49.178948 run osmo-stp_10.42.42.5(pid=24320): Launched 16:49:49.288060 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:49:49.809027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24322): Launched 16:49:49.915488 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:49:50.177645 run patchelf(pid=24323): Launched 16:49:50.353607 run osmo-stp_10.42.42.5(pid=24320): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24320)] 16:49:50.482459 run osmo-stp_10.42.42.5(pid=24320): stdout: | (launched: 2022-12-09_16:49:49.031762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:50.611001 run osmo-stp_10.42.42.5(pid=24320): stderr: | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164949202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:50.734745 run osmo-stp_10.42.42.5(pid=24320): stdout: | (launched: 2022-12-09_16:49:49.031762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:50.857118 run osmo-stp_10.42.42.5(pid=24320): stderr: | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164949201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164949202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164949202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:51.000249 run patchelf(pid=24323): Terminating (SIGINT) 16:49:51.168197 run patchelf(pid=24323): Terminated: ok {rc=0} 16:49:51.199185 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24320): Process ended prematurely: osmo-stp_10.42.42.5(pid=24320) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24320)] [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 16:49:51.208412 tst iperf3.py:8: Test FAILED (7.3 sec) 16:49:51.267947 run osmo-hlr_10.42.42.2(pid=24317): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24317)] 16:49:51.316624 run osmo-hlr_10.42.42.2(pid=24317): stdout: | (launched: 2022-12-09_16:49:48.086586) 16:49:51.366103 run osmo-hlr_10.42.42.2(pid=24317): stderr: | �[0;m�[1;31m20221209164948264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209164948264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209164948264 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209164948265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209164948265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209164948265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209164948277 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209164948287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209164948287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209164948287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:49:51.407922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24312): Terminating (SIGTERM) 16:49:51.447059 run iperf3-srv_10.42.42.10(pid=24313): Terminating (SIGTERM) 16:49:51.486371 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24316): Terminating (SIGTERM) 16:49:51.525688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24319): Terminating (SIGTERM) 16:49:51.564916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24322): Terminating (SIGTERM) 16:49:51.573914 --- ParallelTerminationStrategy: PID 24312 died... 16:49:51.626298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24312): Terminated: ok {rc=0} 16:49:51.635542 --- ParallelTerminationStrategy: PID 24313 died... 16:49:51.687762 run iperf3-srv_10.42.42.10(pid=24313): Terminated {rc=256} 16:49:51.697154 --- ParallelTerminationStrategy: PID 24316 died... 16:49:51.749970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24316): Terminated: ok {rc=0} 16:49:51.759341 --- ParallelTerminationStrategy: PID 24319 died... 16:49:51.811597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24319): Terminated: ok {rc=0} 16:49:51.821158 --- ParallelTerminationStrategy: PID 24322 died... 16:49:51.873076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24322): Terminated: ok {rc=0} 16:49:51.955503 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24320): Process ended prematurely: osmo-stp_10.42.42.5(pid=24320) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24320)]