Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20115): Process ended prematurely: osmo-stp_10.42.42.5(pid=20115) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20115)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:01:09.479446 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:09.490934 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:01:09.655486 tst cs_paging_gprs_active.py: using LAC 22143 16:01:09.781796 tst cs_paging_gprs_active.py: using RAC 213 16:01:09.913323 tst cs_paging_gprs_active.py: using CellId 22143 16:01:10.040628 tst cs_paging_gprs_active.py: using BVCI 22144 16:01:10.065765 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.077258 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.088523 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.100145 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.111639 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.123168 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.134772 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.146257 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:10.157871 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:10.280096 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:10.563774 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:01:10.692196 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:11.014768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20105): Launched 16:01:11.281892 run iperf3-srv_10.42.42.10(pid=20106): Launched 16:01:11.470094 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:01:11.598593 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:11.921731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20107): Launched 16:01:12.189199 run iperf3-srv_10.42.42.10(pid=20108): Launched 16:01:12.377509 tst cs_paging_gprs_active.py:38: start network... 16:01:12.505697 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:01:13.003055 run create_hlr_db(pid=20109): Launched 16:01:13.180485 bus /gobi_6: Setting Powered False 16:01:14.201786 run create_hlr_db(pid=20109): Terminated: ok {rc=0} 16:01:14.642512 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20111): Launched 16:01:14.973547 run osmo-hlr_10.42.42.2(pid=20112): Launched 16:01:15.094609 run osmo-stp_10.42.42.5: Starting osmo-stp 16:01:15.669370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20114): Launched 16:01:16.070813 run osmo-stp_10.42.42.5(pid=20115): Launched 16:01:16.304921 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:01:16.898538 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20117): Launched 16:01:17.011861 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:01:17.296416 run patchelf(pid=20118): Launched 16:01:17.477240 run osmo-stp_10.42.42.5(pid=20115): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20115)] 16:01:17.610160 run osmo-stp_10.42.42.5(pid=20115): stdout: | (launched: 2022-12-09_16:01:15.840890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:17.742899 run osmo-stp_10.42.42.5(pid=20115): stderr: | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160116126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:17.870435 run osmo-stp_10.42.42.5(pid=20115): stdout: | (launched: 2022-12-09_16:01:15.840890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:17.996309 run osmo-stp_10.42.42.5(pid=20115): stderr: | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160116126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160116126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160116127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:18.144568 run patchelf(pid=20118): Terminating (SIGINT) 16:01:18.318738 run patchelf(pid=20118): Terminated: ok {rc=0} 16:01:18.350973 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20115): Process ended prematurely: osmo-stp_10.42.42.5(pid=20115) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20115)] [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:01:18.360269 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:01:18.420836 run osmo-hlr_10.42.42.2(pid=20112): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20112)] 16:01:18.470106 run osmo-hlr_10.42.42.2(pid=20112): stdout: | (launched: 2022-12-09_16:01:14.810883) 16:01:18.519851 run osmo-hlr_10.42.42.2(pid=20112): stderr: | �[0;m�[1;31m20221209160115008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160115008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160115008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160115008 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160115009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160115009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160115021 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160115032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160115032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160115032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:01:18.562383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20105): Terminating (SIGTERM) 16:01:18.602478 run iperf3-srv_10.42.42.10(pid=20106): Terminating (SIGTERM) 16:01:18.642513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20107): Terminating (SIGTERM) 16:01:18.682341 run iperf3-srv_10.42.42.10(pid=20108): Terminating (SIGTERM) 16:01:18.722365 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20111): Terminating (SIGTERM) 16:01:18.762293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20114): Terminating (SIGTERM) 16:01:18.802321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20117): Terminating (SIGTERM) 16:01:18.811463 --- ParallelTerminationStrategy: PID 20105 died... 16:01:18.865706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20105): Terminated: ok {rc=0} 16:01:18.875289 --- ParallelTerminationStrategy: PID 20106 died... 16:01:18.928353 run iperf3-srv_10.42.42.10(pid=20106): Terminated {rc=256} 16:01:18.937851 --- ParallelTerminationStrategy: PID 20107 died... 16:01:18.991002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20107): Terminated: ok {rc=0} 16:01:19.000448 --- ParallelTerminationStrategy: PID 20108 died... 16:01:19.053988 run iperf3-srv_10.42.42.10(pid=20108): Terminated {rc=256} 16:01:19.063510 --- ParallelTerminationStrategy: PID 20111 died... 16:01:19.116726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20111): Terminated: ok {rc=0} 16:01:19.126316 --- ParallelTerminationStrategy: PID 20114 died... 16:01:19.179642 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20114): Terminated: ok {rc=0} 16:01:19.189296 --- ParallelTerminationStrategy: PID 20117 died... 16:01:19.242545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20117): Terminated: ok {rc=0} 16:01:19.326898 bus /gobi_0: Setting Powered False 16:01:20.430191 bus /gobi_0: Setting Powered False 16:01:21.542564 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20115): Process ended prematurely: osmo-stp_10.42.42.5(pid=20115) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20115)]