Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20047): Process ended prematurely: osmo-stp_10.42.42.5(pid=20047) [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20047)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:00:09.063761 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.074644 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:00:09.214701 tst cs_paging_gprs_active.py: using LAC 22138 16:00:09.337498 tst cs_paging_gprs_active.py: using RAC 208 16:00:09.459266 tst cs_paging_gprs_active.py: using CellId 22138 16:00:09.584316 tst cs_paging_gprs_active.py: using BVCI 22139 16:00:09.607868 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.618896 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.629573 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.640205 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.650832 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.661504 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.672191 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.682787 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:09.693578 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:00:09.816901 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:00:10.103569 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:00:10.232624 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:10.554659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20037): Launched 16:00:10.821576 run iperf3-srv_10.42.42.10(pid=20038): Launched 16:00:11.010978 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:00:11.139918 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:11.461441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20039): Launched 16:00:11.730252 run iperf3-srv_10.42.42.10(pid=20040): Launched 16:00:11.919265 tst cs_paging_gprs_active.py:38: start network... 16:00:12.047917 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:00:12.542724 run create_hlr_db(pid=20041): Launched 16:00:12.720925 bus /gobi_6: Setting Powered False 16:00:13.741611 run create_hlr_db(pid=20041): Terminated: ok {rc=0} 16:00:14.181215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20043): Launched 16:00:14.512213 run osmo-hlr_10.42.42.2(pid=20044): Launched 16:00:14.636480 run osmo-stp_10.42.42.5: Starting osmo-stp 16:00:15.209683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20046): Launched 16:00:15.540481 run osmo-stp_10.42.42.5(pid=20047): Launched 16:00:15.660513 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:00:16.291181 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20049): Launched 16:00:16.414403 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:00:16.719769 run patchelf(pid=20050): Launched 16:00:16.918317 run osmo-stp_10.42.42.5(pid=20047): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20047)] 16:00:17.063478 run osmo-stp_10.42.42.5(pid=20047): stdout: | (launched: 2022-12-09_16:00:15.377297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:17.209031 run osmo-stp_10.42.42.5(pid=20047): stderr: | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160015567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160015567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160015567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160015568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:17.345870 run osmo-stp_10.42.42.5(pid=20047): stdout: | (launched: 2022-12-09_16:00:15.377297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:17.480654 run osmo-stp_10.42.42.5(pid=20047): stderr: | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160015566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160015567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160015567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160015567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160015568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:17.638961 run patchelf(pid=20050): Terminating (SIGINT) 16:00:17.824293 run patchelf(pid=20050): Terminated: ok {rc=0} 16:00:17.858724 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20047): Process ended prematurely: osmo-stp_10.42.42.5(pid=20047) [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20047)] [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:00:17.868715 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 16:00:17.932373 run osmo-hlr_10.42.42.2(pid=20044): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20044)] 16:00:17.983870 run osmo-hlr_10.42.42.2(pid=20044): stdout: | (launched: 2022-12-09_16:00:14.349802) 16:00:18.036000 run osmo-hlr_10.42.42.2(pid=20044): stderr: | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160014548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160014560 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160014568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160014569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160014569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:00:18.080458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20037): Terminating (SIGTERM) 16:00:18.122488 run iperf3-srv_10.42.42.10(pid=20038): Terminating (SIGTERM) 16:00:18.164072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20039): Terminating (SIGTERM) 16:00:18.206368 run iperf3-srv_10.42.42.10(pid=20040): Terminating (SIGTERM) 16:00:18.248062 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20043): Terminating (SIGTERM) 16:00:18.289887 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20046): Terminating (SIGTERM) 16:00:18.332262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20049): Terminating (SIGTERM) 16:00:18.341642 --- ParallelTerminationStrategy: PID 20037 died... 16:00:18.397453 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20037): Terminated: ok {rc=0} 16:00:18.407492 --- ParallelTerminationStrategy: PID 20038 died... 16:00:18.462646 run iperf3-srv_10.42.42.10(pid=20038): Terminated {rc=256} 16:00:18.472832 --- ParallelTerminationStrategy: PID 20039 died... 16:00:18.529091 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20039): Terminated: ok {rc=0} 16:00:18.539318 --- ParallelTerminationStrategy: PID 20040 died... 16:00:18.595109 run iperf3-srv_10.42.42.10(pid=20040): Terminated {rc=256} 16:00:18.605069 --- ParallelTerminationStrategy: PID 20043 died... 16:00:18.660804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20043): Terminated: ok {rc=0} 16:00:18.670798 --- ParallelTerminationStrategy: PID 20046 died... 16:00:18.726512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20046): Terminated: ok {rc=0} 16:00:18.736463 --- ParallelTerminationStrategy: PID 20049 died... 16:00:18.791932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20049): Terminated: ok {rc=0} 16:00:18.878495 bus /gobi_0: Setting Powered False 16:00:19.983492 bus /gobi_0: Setting Powered False 16:00:21.092683 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20047): Process ended prematurely: osmo-stp_10.42.42.5(pid=20047) [trial-2361↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20047)]