Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=19974): Process ended prematurely: osmo-stp_10.42.42.5(pid=19974) [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19974)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 15:59:09.041329 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.052535 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 15:59:09.198724 tst cs_paging_gprs_active.py: using LAC 22133 15:59:09.326785 tst cs_paging_gprs_active.py: using RAC 203 15:59:09.459300 tst cs_paging_gprs_active.py: using CellId 22133 15:59:09.590848 tst cs_paging_gprs_active.py: using BVCI 22134 15:59:09.615941 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.627131 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.638208 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.649624 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.660776 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.672044 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.683931 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.695680 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:09.707075 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 15:59:09.825580 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 15:59:10.125587 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:59:10.264326 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:59:10.606673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19964): Launched 15:59:10.891241 run iperf3-srv_10.42.42.10(pid=19965): Launched 15:59:11.094286 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:59:11.232779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:59:11.576155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19966): Launched 15:59:11.860326 run iperf3-srv_10.42.42.10(pid=19967): Launched 15:59:12.063267 tst cs_paging_gprs_active.py:38: start network... 15:59:12.201429 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:59:12.721097 run create_hlr_db(pid=19968): Launched 15:59:12.913275 bus /sierra_2: Setting Powered False 15:59:13.933845 run create_hlr_db(pid=19968): Terminated: ok {rc=0} 15:59:14.348070 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19970): Launched 15:59:14.658126 run osmo-hlr_10.42.42.2(pid=19971): Launched 15:59:14.776480 run osmo-stp_10.42.42.5: Starting osmo-stp 15:59:15.312521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19973): Launched 15:59:15.620877 run osmo-stp_10.42.42.5(pid=19974): Launched 15:59:15.732075 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:59:16.358507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19976): Launched 15:59:16.471126 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:59:16.762014 run patchelf(pid=19977): Launched 15:59:16.947528 run osmo-stp_10.42.42.5(pid=19974): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19974)] 15:59:17.083514 run osmo-stp_10.42.42.5(pid=19974): stdout: | (launched: 2022-12-09_15:59:15.468685) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:59:17.219830 run osmo-stp_10.42.42.5(pid=19974): stderr: | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155915637 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:59:17.349192 run osmo-stp_10.42.42.5(pid=19974): stdout: | (launched: 2022-12-09_15:59:15.468685) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:59:17.475718 run osmo-stp_10.42.42.5(pid=19974): stderr: | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155915636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155915637 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155915637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:59:17.623988 run patchelf(pid=19977): Terminating (SIGINT) 15:59:17.797635 run patchelf(pid=19977): Terminated: ok {rc=0} 15:59:17.829828 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19974): Process ended prematurely: osmo-stp_10.42.42.5(pid=19974) [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19974)] [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 15:59:17.839373 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 15:59:17.900285 run osmo-hlr_10.42.42.2(pid=19971): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19971)] 15:59:17.949549 run osmo-hlr_10.42.42.2(pid=19971): stdout: | (launched: 2022-12-09_15:59:14.504397) 15:59:17.999362 run osmo-hlr_10.42.42.2(pid=19971): stderr: | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209155914681 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209155914693 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209155914703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209155914703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209155914703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:59:18.041937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19964): Terminating (SIGTERM) 15:59:18.082134 run iperf3-srv_10.42.42.10(pid=19965): Terminating (SIGTERM) 15:59:18.122422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19966): Terminating (SIGTERM) 15:59:18.162477 run iperf3-srv_10.42.42.10(pid=19967): Terminating (SIGTERM) 15:59:18.202636 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19970): Terminating (SIGTERM) 15:59:18.243039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19973): Terminating (SIGTERM) 15:59:18.283339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19976): Terminating (SIGTERM) 15:59:18.292651 --- ParallelTerminationStrategy: PID 19964 died... 15:59:18.347220 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19964): Terminated: ok {rc=0} 15:59:18.356925 --- ParallelTerminationStrategy: PID 19965 died... 15:59:18.410370 run iperf3-srv_10.42.42.10(pid=19965): Terminated {rc=256} 15:59:18.419957 --- ParallelTerminationStrategy: PID 19966 died... 15:59:18.473398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19966): Terminated: ok {rc=0} 15:59:18.483083 --- ParallelTerminationStrategy: PID 19967 died... 15:59:18.537003 run iperf3-srv_10.42.42.10(pid=19967): Terminated {rc=256} 15:59:18.546676 --- ParallelTerminationStrategy: PID 19970 died... 15:59:18.600352 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19970): Terminated: ok {rc=0} 15:59:18.610113 --- ParallelTerminationStrategy: PID 19973 died... 15:59:18.663670 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19973): Terminated: ok {rc=0} 15:59:18.673450 --- ParallelTerminationStrategy: PID 19976 died... 15:59:18.727114 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19976): Terminated: ok {rc=0} 15:59:18.811717 bus /gobi_0: Setting Powered False 15:59:19.920459 bus /gobi_0: Setting Powered False 15:59:21.028384 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19974): Process ended prematurely: osmo-stp_10.42.42.5(pid=19974) [trial-2361↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19974)]