Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21585): Process ended prematurely: osmo-stp_10.42.42.5(pid=21585) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21585)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:18:27.164534 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.175568 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:18:27.335326 tst cs_paging_gprs_active.py: using LAC 22234 16:18:27.458782 tst cs_paging_gprs_active.py: using RAC 49 16:18:27.589455 tst cs_paging_gprs_active.py: using CellId 22234 16:18:27.721279 tst cs_paging_gprs_active.py: using BVCI 22235 16:18:27.746791 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.758423 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.769966 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.781648 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.793143 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.804489 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.816094 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.827618 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:27.839274 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:18:27.957858 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:18:28.261034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:18:28.401637 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:18:28.749454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21575): Launched 16:18:29.039387 run iperf3-srv_10.42.42.10(pid=21576): Launched 16:18:29.245163 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:18:29.385168 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:18:29.735256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21577): Launched 16:18:30.025193 run iperf3-srv_10.42.42.10(pid=21578): Launched 16:18:30.231251 tst cs_paging_gprs_active.py:38: start network... 16:18:30.371114 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:18:30.907227 run create_hlr_db(pid=21579): Launched 16:18:31.108522 bus /gobi_6: Setting Powered False 16:18:32.172872 run create_hlr_db(pid=21579): Terminated: ok {rc=0} 16:18:32.597566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21581): Launched 16:18:32.909214 run osmo-hlr_10.42.42.2(pid=21582): Launched 16:18:33.024113 run osmo-stp_10.42.42.5: Starting osmo-stp 16:18:33.569942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21584): Launched 16:18:33.883887 run osmo-stp_10.42.42.5(pid=21585): Launched 16:18:33.996560 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:18:34.541354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21587): Launched 16:18:34.652373 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:18:34.935054 run patchelf(pid=21588): Launched 16:18:35.118854 run osmo-stp_10.42.42.5(pid=21585): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21585)] 16:18:35.252413 run osmo-stp_10.42.42.5(pid=21585): stdout: | (launched: 2022-12-09_16:18:33.728335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:18:35.386326 run osmo-stp_10.42.42.5(pid=21585): stderr: | �[0;m�[38;5;43m20221209161833900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161833901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161833901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161833901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161833903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161833904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161833904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:18:35.515066 run osmo-stp_10.42.42.5(pid=21585): stdout: | (launched: 2022-12-09_16:18:33.728335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:18:35.642229 run osmo-stp_10.42.42.5(pid=21585): stderr: | �[0;m�[38;5;43m20221209161833900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161833901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161833901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161833901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161833903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161833904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161833904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:18:35.791371 run patchelf(pid=21588): Terminating (SIGINT) 16:18:35.966815 run patchelf(pid=21588): Terminated: ok {rc=0} 16:18:35.998927 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21585): Process ended prematurely: osmo-stp_10.42.42.5(pid=21585) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21585)] [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:18:36.008110 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:18:36.068314 run osmo-hlr_10.42.42.2(pid=21582): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21582)] 16:18:36.117246 run osmo-hlr_10.42.42.2(pid=21582): stdout: | (launched: 2022-12-09_16:18:32.755636) 16:18:36.166696 run osmo-hlr_10.42.42.2(pid=21582): stderr: | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209161832936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209161832949 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209161832960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209161832960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209161832960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:18:36.208818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21575): Terminating (SIGTERM) 16:18:36.248284 run iperf3-srv_10.42.42.10(pid=21576): Terminating (SIGTERM) 16:18:36.287900 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21577): Terminating (SIGTERM) 16:18:36.327410 run iperf3-srv_10.42.42.10(pid=21578): Terminating (SIGTERM) 16:18:36.367149 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21581): Terminating (SIGTERM) 16:18:36.407059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21584): Terminating (SIGTERM) 16:18:36.446986 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21587): Terminating (SIGTERM) 16:18:36.456320 --- ParallelTerminationStrategy: PID 21575 died... 16:18:36.509815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21575): Terminated: ok {rc=0} 16:18:36.519490 --- ParallelTerminationStrategy: PID 21576 died... 16:18:36.573126 run iperf3-srv_10.42.42.10(pid=21576): Terminated {rc=256} 16:18:36.582864 --- ParallelTerminationStrategy: PID 21577 died... 16:18:36.636048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21577): Terminated: ok {rc=0} 16:18:36.645782 --- ParallelTerminationStrategy: PID 21578 died... 16:18:36.698917 run iperf3-srv_10.42.42.10(pid=21578): Terminated {rc=256} 16:18:36.708535 --- ParallelTerminationStrategy: PID 21581 died... 16:18:36.761764 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21581): Terminated: ok {rc=0} 16:18:36.771460 --- ParallelTerminationStrategy: PID 21584 died... 16:18:36.824924 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21584): Terminated: ok {rc=0} 16:18:36.834706 --- ParallelTerminationStrategy: PID 21587 died... 16:18:36.887896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21587): Terminated: ok {rc=0} 16:18:36.971756 bus /gobi_0: Setting Powered False 16:18:38.074342 bus /gobi_0: Setting Powered False 16:18:39.185918 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21585): Process ended prematurely: osmo-stp_10.42.42.5(pid=21585) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21585)]