Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8570): Process ended prematurely: osmo-stp_10.42.42.5(pid=8570) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8570)]
Standard Output
---------------------------------------------- trial-2363 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:49:59.804670 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:49:59.815885 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:49:59.951750 tst cs_paging_gprs_active.py: using LAC 23321 19:50:00.071077 tst cs_paging_gprs_active.py: using RAC 116 19:50:00.191383 tst cs_paging_gprs_active.py: using CellId 23321 19:50:00.310678 tst cs_paging_gprs_active.py: using BVCI 23322 19:50:00.333959 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.345218 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.356248 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.367303 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.378371 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.389298 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.400376 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.411246 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:00.422426 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:50:00.541415 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:50:00.848242 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:50:00.996522 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:50:01.388692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Launched 19:50:01.673545 run iperf3-srv_10.42.42.10(pid=8558): Launched 19:50:01.879937 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:50:02.012740 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:50:02.346817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8562): Launched 19:50:02.609340 run iperf3-srv_10.42.42.10(pid=8563): Launched 19:50:02.794879 tst cs_paging_gprs_active.py:38: start network... 19:50:02.921527 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:50:03.410931 run create_hlr_db(pid=8564): Launched 19:50:03.585848 bus /gobi_6: Setting Powered False 19:50:04.607421 run create_hlr_db(pid=8564): Terminated: ok {rc=0} 19:50:05.013484 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8566): Launched 19:50:05.318264 run osmo-hlr_10.42.42.2(pid=8567): Launched 19:50:05.429788 run osmo-stp_10.42.42.5: Starting osmo-stp 19:50:05.971040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8569): Launched 19:50:06.275955 run osmo-stp_10.42.42.5(pid=8570): Launched 19:50:06.386118 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:50:06.917539 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8572): Launched 19:50:07.025694 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:50:07.291278 run patchelf(pid=8573): Launched 19:50:07.468937 run osmo-stp_10.42.42.5(pid=8570): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8570)] 19:50:07.598836 run osmo-stp_10.42.42.5(pid=8570): stdout: | (launched: 2022-12-09_19:50:06.126090) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:07.729215 run osmo-stp_10.42.42.5(pid=8570): stderr: | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209195006297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:07.855538 run osmo-stp_10.42.42.5(pid=8570): stdout: | (launched: 2022-12-09_19:50:06.126090) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:07.979793 run osmo-stp_10.42.42.5(pid=8570): stderr: | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209195006296 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209195006297 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209195006297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:08.125341 run patchelf(pid=8573): Terminating (SIGINT) 19:50:08.295996 run patchelf(pid=8573): Terminated: ok {rc=0} 19:50:08.327463 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8570): Process ended prematurely: osmo-stp_10.42.42.5(pid=8570) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8570)] [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:50:08.336734 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:50:08.395656 run osmo-hlr_10.42.42.2(pid=8567): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8567)] 19:50:08.443723 run osmo-hlr_10.42.42.2(pid=8567): stdout: | (launched: 2022-12-09_19:50:05.168497) 19:50:08.492654 run osmo-hlr_10.42.42.2(pid=8567): stderr: | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209195005348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209195005360 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209195005369 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209195005369 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209195005369 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:50:08.534377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Terminating (SIGTERM) 19:50:08.573582 run iperf3-srv_10.42.42.10(pid=8558): Terminating (SIGTERM) 19:50:08.612742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8562): Terminating (SIGTERM) 19:50:08.651771 run iperf3-srv_10.42.42.10(pid=8563): Terminating (SIGTERM) 19:50:08.691184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8566): Terminating (SIGTERM) 19:50:08.730318 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8569): Terminating (SIGTERM) 19:50:08.769454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8572): Terminating (SIGTERM) 19:50:08.778409 --- ParallelTerminationStrategy: PID 8557 died... 19:50:08.831247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8557): Terminated: ok {rc=0} 19:50:08.840572 --- ParallelTerminationStrategy: PID 8558 died... 19:50:08.892681 run iperf3-srv_10.42.42.10(pid=8558): Terminated {rc=256} 19:50:08.901995 --- ParallelTerminationStrategy: PID 8562 died... 19:50:08.954051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8562): Terminated: ok {rc=0} 19:50:08.963372 --- ParallelTerminationStrategy: PID 8563 died... 19:50:09.015404 run iperf3-srv_10.42.42.10(pid=8563): Terminated {rc=256} 19:50:09.024746 --- ParallelTerminationStrategy: PID 8566 died... 19:50:09.076721 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8566): Terminated: ok {rc=0} 19:50:09.086024 --- ParallelTerminationStrategy: PID 8569 died... 19:50:09.138175 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8569): Terminated: ok {rc=0} 19:50:09.147492 --- ParallelTerminationStrategy: PID 8572 died... 19:50:09.199790 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8572): Terminated: ok {rc=0} 19:50:09.282648 bus /gobi_0: Setting Powered False 19:50:10.389489 bus /gobi_0: Setting Powered False 19:50:11.499527 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8570): Process ended prematurely: osmo-stp_10.42.42.5(pid=8570) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8570)]