Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21029): Process ended prematurely: osmo-stp_10.42.42.5(pid=21029) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21029)]
Standard Output
---------------------------------------------- trial-2365 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:59:10.888183 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:10.899332 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:59:11.028797 tst cs_paging_gprs_active.py: using LAC 23936 21:59:11.159654 tst cs_paging_gprs_active.py: using RAC 221 21:59:11.284685 tst cs_paging_gprs_active.py: using CellId 23936 21:59:11.409910 tst cs_paging_gprs_active.py: using BVCI 23937 21:59:11.434675 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.445788 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.456542 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.467432 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.478226 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.488923 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.499927 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.510716 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:11.521678 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:11.636880 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:11.912253 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:59:12.037262 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:12.349220 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21019): Launched 21:59:12.609700 run iperf3-srv_10.42.42.10(pid=21020): Launched 21:59:12.794463 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:59:12.920263 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:13.234235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21021): Launched 21:59:13.493590 run iperf3-srv_10.42.42.10(pid=21022): Launched 21:59:13.675897 tst cs_paging_gprs_active.py:38: start network... 21:59:13.800714 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:59:14.276407 run create_hlr_db(pid=21023): Launched 21:59:14.450264 bus /gobi_6: Setting Powered False 21:59:15.470497 run create_hlr_db(pid=21023): Terminated: ok {rc=0} 21:59:15.921247 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21025): Launched 21:59:16.304751 run osmo-hlr_10.42.42.2(pid=21026): Launched 21:59:16.441471 run osmo-stp_10.42.42.5: Starting osmo-stp 21:59:17.098750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21028): Launched 21:59:17.424286 run osmo-stp_10.42.42.5(pid=21029): Launched 21:59:17.540502 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:59:18.101493 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21031): Launched 21:59:18.215731 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:59:18.497121 run patchelf(pid=21032): Launched 21:59:18.686893 run osmo-stp_10.42.42.5(pid=21029): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21029)] 21:59:18.826509 run osmo-stp_10.42.42.5(pid=21029): stdout: | (launched: 2022-12-09_21:59:17.255842) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:18.965617 run osmo-stp_10.42.42.5(pid=21029): stderr: | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215917459 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:19.099769 run osmo-stp_10.42.42.5(pid=21029): stdout: | (launched: 2022-12-09_21:59:17.255842) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:19.232797 run osmo-stp_10.42.42.5(pid=21029): stderr: | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215917458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215917459 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215917459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:19.389319 run patchelf(pid=21032): Terminating (SIGINT) 21:59:19.572459 run patchelf(pid=21032): Terminated: ok {rc=0} 21:59:19.606107 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21029): Process ended prematurely: osmo-stp_10.42.42.5(pid=21029) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21029)] [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:59:19.615952 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 21:59:19.678608 run osmo-hlr_10.42.42.2(pid=21026): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21026)] 21:59:19.730243 run osmo-hlr_10.42.42.2(pid=21026): stdout: | (launched: 2022-12-09_21:59:16.087167) 21:59:19.782338 run osmo-hlr_10.42.42.2(pid=21026): stderr: | �[0;m�[1;31m20221209215916451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209215916451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209215916451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209215916451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209215916451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209215916452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209215916476 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209215916492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209215916492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209215916492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:59:19.826869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21019): Terminating (SIGTERM) 21:59:19.868801 run iperf3-srv_10.42.42.10(pid=21020): Terminating (SIGTERM) 21:59:19.910902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21021): Terminating (SIGTERM) 21:59:19.953069 run iperf3-srv_10.42.42.10(pid=21022): Terminating (SIGTERM) 21:59:19.995384 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21025): Terminating (SIGTERM) 21:59:20.037662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21028): Terminating (SIGTERM) 21:59:20.079658 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21031): Terminating (SIGTERM) 21:59:20.089416 --- ParallelTerminationStrategy: PID 21019 died... 21:59:20.145644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21019): Terminated: ok {rc=0} 21:59:20.155705 --- ParallelTerminationStrategy: PID 21020 died... 21:59:20.210731 run iperf3-srv_10.42.42.10(pid=21020): Terminated {rc=256} 21:59:20.220705 --- ParallelTerminationStrategy: PID 21021 died... 21:59:20.276055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21021): Terminated: ok {rc=0} 21:59:20.286097 --- ParallelTerminationStrategy: PID 21022 died... 21:59:20.341364 run iperf3-srv_10.42.42.10(pid=21022): Terminated {rc=256} 21:59:20.351318 --- ParallelTerminationStrategy: PID 21025 died... 21:59:20.406497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21025): Terminated: ok {rc=0} 21:59:20.416241 --- ParallelTerminationStrategy: PID 21028 died... 21:59:20.471332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21028): Terminated: ok {rc=0} 21:59:20.481382 --- ParallelTerminationStrategy: PID 21031 died... 21:59:20.536590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21031): Terminated: ok {rc=0} 21:59:20.623028 bus /gobi_0: Setting Powered False 21:59:21.730447 bus /gobi_0: Setting Powered False 21:59:22.837495 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21029): Process ended prematurely: osmo-stp_10.42.42.5(pid=21029) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21029)]