Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19733): Process ended prematurely: osmo-stp_10.42.42.5(pid=19733) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19733)]
Standard Output
---------------------------------------------- trial-2365 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 21:52:15.392266 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.403281 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:52:15.545999 tst cs_paging_gprs_active.py: using LAC 23899 21:52:15.664280 tst cs_paging_gprs_active.py: using RAC 184 21:52:15.783591 tst cs_paging_gprs_active.py: using CellId 23899 21:52:15.916520 tst cs_paging_gprs_active.py: using BVCI 23900 21:52:15.940489 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.952000 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.963435 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.974794 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.986114 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:15.997549 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:16.009379 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:16.020530 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:52:16.032207 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:52:16.175256 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:52:16.521844 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:52:16.651047 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:52:16.988418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19723): Launched 21:52:17.268150 run iperf3-srv_10.42.42.10(pid=19724): Launched 21:52:17.455511 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:52:17.583117 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:52:17.899704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19725): Launched 21:52:18.164097 run iperf3-srv_10.42.42.10(pid=19726): Launched 21:52:18.349840 tst cs_paging_gprs_active.py:38: start network... 21:52:18.476185 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:52:18.955055 run create_hlr_db(pid=19727): Launched 21:52:19.132016 bus /gobi_6: Setting Powered False 21:52:20.151615 run create_hlr_db(pid=19727): Terminated: ok {rc=0} 21:52:20.585770 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19729): Launched 21:52:20.911614 run osmo-hlr_10.42.42.2(pid=19730): Launched 21:52:21.033244 run osmo-stp_10.42.42.5: Starting osmo-stp 21:52:21.599526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19732): Launched 21:52:21.924847 run osmo-stp_10.42.42.5(pid=19733): Launched 21:52:22.043086 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:52:22.610712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19741): Launched 21:52:22.727147 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:52:23.011529 run patchelf(pid=19742): Launched 21:52:23.202755 run osmo-stp_10.42.42.5(pid=19733): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19733)] 21:52:23.342716 run osmo-stp_10.42.42.5(pid=19733): stdout: | (launched: 2022-12-09_21:52:21.765395) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:52:23.482277 run osmo-stp_10.42.42.5(pid=19733): stderr: | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215221962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:52:23.617720 run osmo-stp_10.42.42.5(pid=19733): stdout: | (launched: 2022-12-09_21:52:21.765395) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:52:23.751090 run osmo-stp_10.42.42.5(pid=19733): stderr: | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215221961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215221962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215221962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:52:23.907241 run patchelf(pid=19742): Terminating (SIGINT) 21:52:24.091973 run patchelf(pid=19742): Terminated: ok {rc=0} 21:52:24.125781 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19733): Process ended prematurely: osmo-stp_10.42.42.5(pid=19733) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19733)] [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 21:52:24.135769 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 21:52:24.198497 run osmo-hlr_10.42.42.2(pid=19730): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19730)] 21:52:24.249750 run osmo-hlr_10.42.42.2(pid=19730): stdout: | (launched: 2022-12-09_21:52:20.751646) 21:52:24.301750 run osmo-hlr_10.42.42.2(pid=19730): stderr: | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209215220950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209215220963 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209215220971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209215220971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209215220971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:52:24.346005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19723): Terminating (SIGTERM) 21:52:24.387388 run iperf3-srv_10.42.42.10(pid=19724): Terminating (SIGTERM) 21:52:24.429162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19725): Terminating (SIGTERM) 21:52:24.470848 run iperf3-srv_10.42.42.10(pid=19726): Terminating (SIGTERM) 21:52:24.513180 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19729): Terminating (SIGTERM) 21:52:24.554955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19732): Terminating (SIGTERM) 21:52:24.596703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19741): Terminating (SIGTERM) 21:52:24.606456 --- ParallelTerminationStrategy: PID 19723 died... 21:52:24.662609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19723): Terminated: ok {rc=0} 21:52:24.672797 --- ParallelTerminationStrategy: PID 19724 died... 21:52:24.727996 run iperf3-srv_10.42.42.10(pid=19724): Terminated {rc=256} 21:52:24.738061 --- ParallelTerminationStrategy: PID 19725 died... 21:52:24.793500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19725): Terminated: ok {rc=0} 21:52:24.803519 --- ParallelTerminationStrategy: PID 19726 died... 21:52:24.858592 run iperf3-srv_10.42.42.10(pid=19726): Terminated {rc=256} 21:52:24.868778 --- ParallelTerminationStrategy: PID 19729 died... 21:52:24.924274 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19729): Terminated: ok {rc=0} 21:52:24.934331 --- ParallelTerminationStrategy: PID 19732 died... 21:52:24.989735 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19732): Terminated: ok {rc=0} 21:52:24.999849 --- ParallelTerminationStrategy: PID 19741 died... 21:52:25.055417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19741): Terminated: ok {rc=0} 21:52:25.141557 bus /gobi_0: Setting Powered False 21:52:26.245199 bus /gobi_0: Setting Powered False 21:52:27.356053 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19733): Process ended prematurely: osmo-stp_10.42.42.5(pid=19733) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19733)]