Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=27242): Process ended prematurely: osmo-stp_10.42.42.5(pid=27242) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27242)]
Standard Output
---------------------------------------------- trial-2365 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 22:57:13.781105 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:13.792925 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:57:13.929229 tst iperf3.py: using LAC 24244 22:57:14.048602 tst iperf3.py: using RAC 19 22:57:14.167952 tst iperf3.py: using CellId 24244 22:57:14.285538 tst iperf3.py: using BVCI 24245 22:57:14.308423 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.319751 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.330809 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.342148 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.353334 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.364618 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.375654 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.386787 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:57:14.398433 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:57:14.674166 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:57:14.798899 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:57:15.109617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27234): Launched 22:57:15.367057 run iperf3-srv_10.42.42.10(pid=27235): Launched 22:57:15.549861 tst iperf3.py:8: start network... 22:57:15.674322 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:57:16.207161 run create_hlr_db(pid=27236): Launched 22:57:16.384896 bus /gobi_6: Setting Powered False 22:57:17.401457 run create_hlr_db(pid=27236): Terminated: ok {rc=0} 22:57:17.824732 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27238): Launched 22:57:18.123641 run osmo-hlr_10.42.42.2(pid=27239): Launched 22:57:18.236247 run osmo-stp_10.42.42.5: Starting osmo-stp 22:57:18.763703 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27241): Launched 22:57:19.063161 run osmo-stp_10.42.42.5(pid=27242): Launched 22:57:19.172448 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:57:19.694559 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27244): Launched 22:57:19.801281 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:57:20.062658 run patchelf(pid=27245): Launched 22:57:20.239246 run osmo-stp_10.42.42.5(pid=27242): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27242)] 22:57:20.368015 run osmo-stp_10.42.42.5(pid=27242): stdout: | (launched: 2022-12-09_22:57:18.915523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:20.497688 run osmo-stp_10.42.42.5(pid=27242): stderr: | �[0;m�[38;5;43m20221209225719085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209225719085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209225719086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209225719086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209225719086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209225719086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209225719087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:20.621913 run osmo-stp_10.42.42.5(pid=27242): stdout: | (launched: 2022-12-09_22:57:18.915523) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:57:20.744807 run osmo-stp_10.42.42.5(pid=27242): stderr: | �[0;m�[38;5;43m20221209225719085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209225719085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209225719086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209225719086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209225719086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209225719086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209225719087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:57:20.889350 run patchelf(pid=27245): Terminating (SIGINT) 22:57:21.059621 run patchelf(pid=27245): Terminated: ok {rc=0} 22:57:21.090780 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27242): Process ended prematurely: osmo-stp_10.42.42.5(pid=27242) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27242)] [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 22:57:21.100037 tst iperf3.py:8: Test FAILED (7.4 sec) 22:57:21.160618 run osmo-hlr_10.42.42.2(pid=27239): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27239)] 22:57:21.209893 run osmo-hlr_10.42.42.2(pid=27239): stdout: | (launched: 2022-12-09_22:57:17.976735) 22:57:21.259872 run osmo-hlr_10.42.42.2(pid=27239): stderr: | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209225718153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209225718164 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209225718174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209225718174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209225718174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:57:21.301951 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27234): Terminating (SIGTERM) 22:57:21.341973 run iperf3-srv_10.42.42.10(pid=27235): Terminating (SIGTERM) 22:57:21.381983 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27238): Terminating (SIGTERM) 22:57:21.421897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27241): Terminating (SIGTERM) 22:57:21.461912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27244): Terminating (SIGTERM) 22:57:21.471303 --- ParallelTerminationStrategy: PID 27234 died... 22:57:21.524598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27234): Terminated: ok {rc=0} 22:57:21.534455 --- ParallelTerminationStrategy: PID 27235 died... 22:57:21.587428 run iperf3-srv_10.42.42.10(pid=27235): Terminated {rc=256} 22:57:21.597155 --- ParallelTerminationStrategy: PID 27238 died... 22:57:21.650307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27238): Terminated: ok {rc=0} 22:57:21.660082 --- ParallelTerminationStrategy: PID 27241 died... 22:57:21.713697 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27241): Terminated: ok {rc=0} 22:57:21.723290 --- ParallelTerminationStrategy: PID 27244 died... 22:57:21.776701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27244): Terminated: ok {rc=0} 22:57:21.860560 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27242): Process ended prematurely: osmo-stp_10.42.42.5(pid=27242) [trial-2365↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27242)]