Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=21563): Process ended prematurely: osmo-stp_10.42.42.5(pid=21563) [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21563)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 22:06:44.234849 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.245806 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 22:06:44.390495 tst cs_paging_gprs_active.py: using LAC 23977 22:06:44.517980 tst cs_paging_gprs_active.py: using RAC 7 22:06:44.647354 tst cs_paging_gprs_active.py: using CellId 23977 22:06:44.775037 tst cs_paging_gprs_active.py: using BVCI 23978 22:06:44.799980 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.810992 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.821845 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.832595 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.843507 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.854259 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.865446 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.876205 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:06:44.887182 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:45.003911 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:06:45.297221 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:06:45.431945 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:45.766723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21553): Launched 22:06:46.061706 run iperf3-srv_10.42.42.10(pid=21554): Launched 22:06:46.263124 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:06:46.400310 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:06:46.754171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21555): Launched 22:06:47.087603 run iperf3-srv_10.42.42.10(pid=21556): Launched 22:06:47.290892 tst cs_paging_gprs_active.py:38: start network... 22:06:47.426588 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:06:47.944581 run create_hlr_db(pid=21557): Launched 22:06:48.132134 bus /sierra_2: Setting Powered False 22:06:49.152607 run create_hlr_db(pid=21557): Terminated: ok {rc=0} 22:06:49.559417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21559): Launched 22:06:49.862422 run osmo-hlr_10.42.42.2(pid=21560): Launched 22:06:49.981463 run osmo-stp_10.42.42.5: Starting osmo-stp 22:06:50.519303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21562): Launched 22:06:50.821998 run osmo-stp_10.42.42.5(pid=21563): Launched 22:06:50.933649 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:06:51.460917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21565): Launched 22:06:51.568800 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:06:51.842400 run patchelf(pid=21566): Launched 22:06:52.033301 run osmo-stp_10.42.42.5(pid=21563): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21563)] 22:06:52.171850 run osmo-stp_10.42.42.5(pid=21563): stdout: | (launched: 2022-12-09_22:06:50.673504) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:52.310463 run osmo-stp_10.42.42.5(pid=21563): stderr: | �[0;m�[38;5;43m20221209220650844 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220650845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220650845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220650845 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:52.444844 run osmo-stp_10.42.42.5(pid=21563): stdout: | (launched: 2022-12-09_22:06:50.673504) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:06:52.577479 run osmo-stp_10.42.42.5(pid=21563): stderr: | �[0;m�[38;5;43m20221209220650844 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220650845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220650845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220650845 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220650846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:06:52.732715 run patchelf(pid=21566): Terminating (SIGINT) 22:06:52.915209 run patchelf(pid=21566): Terminated: ok {rc=0} 22:06:52.949565 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21563): Process ended prematurely: osmo-stp_10.42.42.5(pid=21563) [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21563)] [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 22:06:52.959502 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 22:06:53.022521 run osmo-hlr_10.42.42.2(pid=21560): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21560)] 22:06:53.073894 run osmo-hlr_10.42.42.2(pid=21560): stdout: | (launched: 2022-12-09_22:06:49.713536) 22:06:53.126181 run osmo-hlr_10.42.42.2(pid=21560): stderr: | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220649889 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220649905 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220649916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220649916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220649916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:06:53.170793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21553): Terminating (SIGTERM) 22:06:53.212703 run iperf3-srv_10.42.42.10(pid=21554): Terminating (SIGTERM) 22:06:53.256408 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21555): Terminating (SIGTERM) 22:06:53.298035 run iperf3-srv_10.42.42.10(pid=21556): Terminating (SIGTERM) 22:06:53.339891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21559): Terminating (SIGTERM) 22:06:53.381718 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21562): Terminating (SIGTERM) 22:06:53.423526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21565): Terminating (SIGTERM) 22:06:53.433258 --- ParallelTerminationStrategy: PID 21553 died... 22:06:53.489243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21553): Terminated: ok {rc=0} 22:06:53.499368 --- ParallelTerminationStrategy: PID 21554 died... 22:06:53.554637 run iperf3-srv_10.42.42.10(pid=21554): Terminated {rc=256} 22:06:53.564643 --- ParallelTerminationStrategy: PID 21555 died... 22:06:53.620086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21555): Terminated: ok {rc=0} 22:06:53.630093 --- ParallelTerminationStrategy: PID 21556 died... 22:06:53.685424 run iperf3-srv_10.42.42.10(pid=21556): Terminated {rc=256} 22:06:53.695427 --- ParallelTerminationStrategy: PID 21559 died... 22:06:53.751039 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21559): Terminated: ok {rc=0} 22:06:53.761117 --- ParallelTerminationStrategy: PID 21562 died... 22:06:53.816428 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21562): Terminated: ok {rc=0} 22:06:53.826502 --- ParallelTerminationStrategy: PID 21565 died... 22:06:53.882111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21565): Terminated: ok {rc=0} 22:06:53.969891 bus /gobi_0: Setting Powered False 22:06:55.073565 bus /gobi_0: Setting Powered False 22:06:56.183725 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21563): Process ended prematurely: osmo-stp_10.42.42.5(pid=21563) [trial-2365↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21563)]