Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=24454): Process ended prematurely: osmo-stp_10.42.42.5(pid=24454) [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24454)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 22:32:44.463748 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:44.474709 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 22:32:44.616148 tst cs_paging_gprs_active.py: using LAC 24115 22:32:44.733237 tst cs_paging_gprs_active.py: using RAC 145 22:32:44.850077 tst cs_paging_gprs_active.py: using CellId 24115 22:32:44.966668 tst cs_paging_gprs_active.py: using BVCI 24116 22:32:44.989821 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.000447 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.010902 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.021597 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.032101 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.042688 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.053471 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.063846 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 22:32:45.074552 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 22:32:45.194090 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 22:32:45.486821 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:32:45.620940 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:32:45.981284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24444): Launched 22:32:46.286260 run iperf3-srv_10.42.42.10(pid=24445): Launched 22:32:46.488397 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:32:46.620253 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:32:46.990217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24446): Launched 22:32:47.316734 run iperf3-srv_10.42.42.10(pid=24447): Launched 22:32:47.503418 tst cs_paging_gprs_active.py:38: start network... 22:32:47.629583 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:32:48.106291 run create_hlr_db(pid=24448): Launched 22:32:48.280278 bus /sierra_2: Setting Powered False 22:32:49.303241 run create_hlr_db(pid=24448): Terminated: ok {rc=0} 22:32:49.706316 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24450): Launched 22:32:50.008300 run osmo-hlr_10.42.42.2(pid=24451): Launched 22:32:50.125292 run osmo-stp_10.42.42.5: Starting osmo-stp 22:32:50.660690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24453): Launched 22:32:50.963601 run osmo-stp_10.42.42.5(pid=24454): Launched 22:32:51.073622 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:32:51.599304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24456): Launched 22:32:51.706975 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:32:51.972459 run patchelf(pid=24457): Launched 22:32:52.151125 run osmo-stp_10.42.42.5(pid=24454): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24454)] 22:32:52.281578 run osmo-stp_10.42.42.5(pid=24454): stdout: | (launched: 2022-12-09_22:32:50.814704) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:32:52.412055 run osmo-stp_10.42.42.5(pid=24454): stderr: | �[0;m�[38;5;43m20221209223250984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223250984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223250985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223250985 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:32:52.538196 run osmo-stp_10.42.42.5(pid=24454): stdout: | (launched: 2022-12-09_22:32:50.814704) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:32:52.663454 run osmo-stp_10.42.42.5(pid=24454): stderr: | �[0;m�[38;5;43m20221209223250984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223250984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223250985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223250985 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223250986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:32:52.810059 run patchelf(pid=24457): Terminating (SIGINT) 22:32:52.981976 run patchelf(pid=24457): Terminated: ok {rc=0} 22:32:53.013482 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24454): Process ended prematurely: osmo-stp_10.42.42.5(pid=24454) [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24454)] [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 22:32:53.022648 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:32:53.083278 run osmo-hlr_10.42.42.2(pid=24451): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24451)] 22:32:53.132503 run osmo-hlr_10.42.42.2(pid=24451): stdout: | (launched: 2022-12-09_22:32:49.859519) 22:32:53.182235 run osmo-hlr_10.42.42.2(pid=24451): stderr: | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209223250033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209223250046 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209223250057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209223250057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209223250057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:32:53.224253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24444): Terminating (SIGTERM) 22:32:53.263768 run iperf3-srv_10.42.42.10(pid=24445): Terminating (SIGTERM) 22:32:53.303605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24446): Terminating (SIGTERM) 22:32:53.343154 run iperf3-srv_10.42.42.10(pid=24447): Terminating (SIGTERM) 22:32:53.382653 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24450): Terminating (SIGTERM) 22:32:53.422107 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24453): Terminating (SIGTERM) 22:32:53.461453 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24456): Terminating (SIGTERM) 22:32:53.470769 --- ParallelTerminationStrategy: PID 24444 died... 22:32:53.523952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24444): Terminated: ok {rc=0} 22:32:53.533671 --- ParallelTerminationStrategy: PID 24445 died... 22:32:53.586311 run iperf3-srv_10.42.42.10(pid=24445): Terminated {rc=256} 22:32:53.595984 --- ParallelTerminationStrategy: PID 24446 died... 22:32:53.648775 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24446): Terminated: ok {rc=0} 22:32:53.658249 --- ParallelTerminationStrategy: PID 24447 died... 22:32:53.710910 run iperf3-srv_10.42.42.10(pid=24447): Terminated {rc=256} 22:32:53.720685 --- ParallelTerminationStrategy: PID 24450 died... 22:32:53.773580 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24450): Terminated: ok {rc=0} 22:32:53.783330 --- ParallelTerminationStrategy: PID 24453 died... 22:32:53.836552 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24453): Terminated: ok {rc=0} 22:32:53.846153 --- ParallelTerminationStrategy: PID 24456 died... 22:32:53.899137 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24456): Terminated: ok {rc=0} 22:32:53.983065 bus /gobi_0: Setting Powered False 22:32:55.090231 bus /gobi_0: Setting Powered False 22:32:56.200648 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24454): Process ended prematurely: osmo-stp_10.42.42.5(pid=24454) [trial-2365↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24454)]