Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=23202): Process ended prematurely: osmo-stp_10.42.42.5(pid=23202) [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23202)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:18:37.895345 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:37.906906 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:18:38.066242 tst cs_paging_gprs_active.py: using LAC 24039 22:18:38.183414 tst cs_paging_gprs_active.py: using RAC 69 22:18:38.306058 tst cs_paging_gprs_active.py: using CellId 24039 22:18:38.423342 tst cs_paging_gprs_active.py: using BVCI 24040 22:18:38.446591 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.457617 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.468495 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.479676 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.490891 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.501971 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.513480 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.524559 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:18:38.535869 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:18:38.653847 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:18:38.932791 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:18:39.058894 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:18:39.372398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23192): Launched 22:18:39.634528 run iperf3-srv_10.42.42.10(pid=23193): Launched 22:18:39.821508 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:18:39.948568 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:18:40.264522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23194): Launched 22:18:40.525464 run iperf3-srv_10.42.42.10(pid=23195): Launched 22:18:40.710224 tst cs_paging_gprs_active.py:38: start network... 22:18:40.836096 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:18:41.311984 run create_hlr_db(pid=23196): Launched 22:18:41.486747 bus /gobi_6: Setting Powered False 22:18:42.507190 run create_hlr_db(pid=23196): Terminated: ok {rc=0} 22:18:42.911324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23198): Launched 22:18:43.214812 run osmo-hlr_10.42.42.2(pid=23199): Launched 22:18:43.329574 run osmo-stp_10.42.42.5: Starting osmo-stp 22:18:43.863757 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23201): Launched 22:18:44.166524 run osmo-stp_10.42.42.5(pid=23202): Launched 22:18:44.277391 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:18:44.803601 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23204): Launched 22:18:44.910960 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:18:45.174827 run patchelf(pid=23205): Launched 22:18:45.352802 run osmo-stp_10.42.42.5(pid=23202): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23202)] 22:18:45.482570 run osmo-stp_10.42.42.5(pid=23202): stdout: | (launched: 2022-12-09_22:18:44.017633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:18:45.612649 run osmo-stp_10.42.42.5(pid=23202): stderr: | �[0;m�[38;5;43m20221209221844185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221844185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221844186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221844186 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:18:45.737866 run osmo-stp_10.42.42.5(pid=23202): stdout: | (launched: 2022-12-09_22:18:44.017633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:18:45.863278 run osmo-stp_10.42.42.5(pid=23202): stderr: | �[0;m�[38;5;43m20221209221844185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221844185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221844186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221844186 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221844187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:18:46.023077 run patchelf(pid=23205): Terminating (SIGINT) 22:18:46.220363 run patchelf(pid=23205): Terminated: ok {rc=0} 22:18:46.256138 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23202): Process ended prematurely: osmo-stp_10.42.42.5(pid=23202) [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23202)] [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:18:46.267163 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 22:18:46.332756 run osmo-hlr_10.42.42.2(pid=23199): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23199)] 22:18:46.387266 run osmo-hlr_10.42.42.2(pid=23199): stdout: | (launched: 2022-12-09_22:18:43.065355) 22:18:46.442093 run osmo-hlr_10.42.42.2(pid=23199): stderr: | �[0;m�[1;31m20221209221843242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209221843242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209221843242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209221843242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209221843243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209221843243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209221843255 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209221843265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209221843266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209221843266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:18:46.488300 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23192): Terminating (SIGTERM) 22:18:46.532108 run iperf3-srv_10.42.42.10(pid=23193): Terminating (SIGTERM) 22:18:46.578478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23194): Terminating (SIGTERM) 22:18:46.625916 run iperf3-srv_10.42.42.10(pid=23195): Terminating (SIGTERM) 22:18:46.671194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23198): Terminating (SIGTERM) 22:18:46.715630 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23201): Terminating (SIGTERM) 22:18:46.757425 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23204): Terminating (SIGTERM) 22:18:46.767304 --- ParallelTerminationStrategy: PID 23192 died... 22:18:46.823640 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23192): Terminated: ok {rc=0} 22:18:46.834128 --- ParallelTerminationStrategy: PID 23193 died... 22:18:46.890479 run iperf3-srv_10.42.42.10(pid=23193): Terminated {rc=256} 22:18:46.900923 --- ParallelTerminationStrategy: PID 23194 died... 22:18:46.955964 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23194): Terminated: ok {rc=0} 22:18:46.967358 --- ParallelTerminationStrategy: PID 23195 died... 22:18:47.023584 run iperf3-srv_10.42.42.10(pid=23195): Terminated {rc=256} 22:18:47.034083 --- ParallelTerminationStrategy: PID 23198 died... 22:18:47.090219 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23198): Terminated: ok {rc=0} 22:18:47.100671 --- ParallelTerminationStrategy: PID 23201 died... 22:18:47.157142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23201): Terminated: ok {rc=0} 22:18:47.167543 --- ParallelTerminationStrategy: PID 23204 died... 22:18:47.223759 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23204): Terminated: ok {rc=0} 22:18:47.313407 bus /gobi_0: Setting Powered False 22:18:48.414769 bus /gobi_0: Setting Powered False 22:18:49.525684 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23202): Process ended prematurely: osmo-stp_10.42.42.5(pid=23202) [trial-2365↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23202)]