Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=673): Process ended prematurely: osmo-stp_10.42.42.5(pid=673) [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=673)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 00:07:38.201153 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.213157 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 00:07:38.355930 tst iperf3.py: using LAC 24619 00:07:38.482826 tst iperf3.py: using RAC 139 00:07:38.614319 tst iperf3.py: using CellId 24619 00:07:38.737955 tst iperf3.py: using BVCI 24620 00:07:38.762597 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.774106 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.785187 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.796499 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.807928 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.819571 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.831384 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.842484 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:38.854119 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:39.132366 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:07:39.257551 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:39.569112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=665): Launched 00:07:39.827451 run iperf3-srv_10.42.42.10(pid=666): Launched 00:07:40.010549 tst iperf3.py:8: start network... 00:07:40.135938 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:07:40.618424 run create_hlr_db(pid=667): Launched 00:07:40.790814 bus /gobi_6: Setting Powered False 00:07:41.812122 run create_hlr_db(pid=667): Terminated: ok {rc=0} 00:07:42.238008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=669): Launched 00:07:42.560623 run osmo-hlr_10.42.42.2(pid=670): Launched 00:07:42.681421 run osmo-stp_10.42.42.5: Starting osmo-stp 00:07:43.238925 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=672): Launched 00:07:43.561353 run osmo-stp_10.42.42.5(pid=673): Launched 00:07:43.680565 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:07:44.243030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=675): Launched 00:07:44.358075 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:07:44.638201 run patchelf(pid=676): Launched 00:07:44.825859 run osmo-stp_10.42.42.5(pid=673): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=673)] 00:07:44.963469 run osmo-stp_10.42.42.5(pid=673): stdout: | (launched: 2022-12-10_00:07:43.402553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:45.102105 run osmo-stp_10.42.42.5(pid=673): stderr: | �[0;m�[38;5;43m20221210000743593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000743593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000743594 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000743594 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:45.235485 run osmo-stp_10.42.42.5(pid=673): stdout: | (launched: 2022-12-10_00:07:43.402553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:07:45.367406 run osmo-stp_10.42.42.5(pid=673): stderr: | �[0;m�[38;5;43m20221210000743593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000743593 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000743594 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000743594 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000743595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:07:45.521479 run patchelf(pid=676): Terminating (SIGINT) 00:07:45.702306 run patchelf(pid=676): Terminated: ok {rc=0} 00:07:45.735224 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=673): Process ended prematurely: osmo-stp_10.42.42.5(pid=673) [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=673)] [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 00:07:45.744920 tst iperf3.py:8: Test FAILED (7.6 sec) 00:07:45.807500 run osmo-hlr_10.42.42.2(pid=670): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=670)] 00:07:45.865789 run osmo-hlr_10.42.42.2(pid=670): stdout: | (launched: 2022-12-10_00:07:42.401957) 00:07:45.934026 run osmo-hlr_10.42.42.2(pid=670): stderr: | �[0;m�[1;31m20221210000742601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210000742601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210000742602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210000742602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210000742602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210000742602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210000742614 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210000742623 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210000742623 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210000742623 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:07:45.979864 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=665): Terminating (SIGTERM) 00:07:46.036903 run iperf3-srv_10.42.42.10(pid=666): Terminating (SIGTERM) 00:07:46.088406 run pcap-recorder_any(filters='host 10.42.42.2')(pid=669): Terminating (SIGTERM) 00:07:46.131632 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=672): Terminating (SIGTERM) 00:07:46.175641 run pcap-recorder_any(filters='host 10.42.42.6')(pid=675): Terminating (SIGTERM) 00:07:46.186141 --- ParallelTerminationStrategy: PID 665 died... 00:07:46.244096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=665): Terminated: ok {rc=0} 00:07:46.254571 --- ParallelTerminationStrategy: PID 666 died... 00:07:46.309918 run iperf3-srv_10.42.42.10(pid=666): Terminated {rc=256} 00:07:46.320185 --- ParallelTerminationStrategy: PID 669 died... 00:07:46.375830 run pcap-recorder_any(filters='host 10.42.42.2')(pid=669): Terminated: ok {rc=0} 00:07:46.386246 --- ParallelTerminationStrategy: PID 672 died... 00:07:46.442887 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=672): Terminated: ok {rc=0} 00:07:46.453354 --- ParallelTerminationStrategy: PID 675 died... 00:07:46.508912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=675): Terminated: ok {rc=0} 00:07:46.602244 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=673): Process ended prematurely: osmo-stp_10.42.42.5(pid=673) [trial-2366↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=673)]