Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5350): Process ended prematurely: osmo-stp_10.42.42.5(pid=5350) [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5350)]
Standard Output
---------------------------------------------- trial-2367 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:54:46.944928 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:46.961767 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:54:47.125080 tst cs_paging_gprs_active.py: using LAC 24858 00:54:47.269571 tst cs_paging_gprs_active.py: using RAC 123 00:54:47.390156 tst cs_paging_gprs_active.py: using CellId 24858 00:54:47.512597 tst cs_paging_gprs_active.py: using BVCI 24859 00:54:47.535641 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.546316 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.556749 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.567625 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.578493 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.589079 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.599864 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.610380 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:54:47.621388 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:54:47.736246 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:54:48.029831 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:54:48.165271 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:54:48.497581 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Launched 00:54:48.758115 run iperf3-srv_10.42.42.10(pid=5341): Launched 00:54:48.942465 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:54:49.067738 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:54:49.379909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5342): Launched 00:54:49.639429 run iperf3-srv_10.42.42.10(pid=5343): Launched 00:54:49.822518 tst cs_paging_gprs_active.py:38: start network... 00:54:49.947751 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:54:50.424539 run create_hlr_db(pid=5344): Launched 00:54:50.597980 bus /gobi_6: Setting Powered False 00:54:51.619274 run create_hlr_db(pid=5344): Terminated: ok {rc=0} 00:54:52.020311 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5346): Launched 00:54:52.323015 run osmo-hlr_10.42.42.2(pid=5347): Launched 00:54:52.441675 run osmo-stp_10.42.42.5: Starting osmo-stp 00:54:52.963965 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5349): Launched 00:54:53.264681 run osmo-stp_10.42.42.5(pid=5350): Launched 00:54:53.374031 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:54:53.898323 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5352): Launched 00:54:54.006130 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:54:54.269242 run patchelf(pid=5353): Launched 00:54:54.444835 run osmo-stp_10.42.42.5(pid=5350): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5350)] 00:54:54.573947 run osmo-stp_10.42.42.5(pid=5350): stdout: | (launched: 2022-12-10_00:54:53.116379) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:54.702677 run osmo-stp_10.42.42.5(pid=5350): stderr: | �[0;m�[38;5;43m20221210005453288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005453288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005453289 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005453289 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:54.827381 run osmo-stp_10.42.42.5(pid=5350): stdout: | (launched: 2022-12-10_00:54:53.116379) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:54.951093 run osmo-stp_10.42.42.5(pid=5350): stderr: | �[0;m�[38;5;43m20221210005453288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005453288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005453289 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005453289 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005453290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:55.094781 run patchelf(pid=5353): Terminating (SIGINT) 00:54:55.262941 run patchelf(pid=5353): Terminated: ok {rc=0} 00:54:55.294071 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5350): Process ended prematurely: osmo-stp_10.42.42.5(pid=5350) [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5350)] [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:54:55.303276 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 00:54:55.363980 run osmo-hlr_10.42.42.2(pid=5347): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5347)] 00:54:55.413115 run osmo-hlr_10.42.42.2(pid=5347): stdout: | (launched: 2022-12-10_00:54:52.173417) 00:54:55.463034 run osmo-hlr_10.42.42.2(pid=5347): stderr: | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210005452351 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210005452363 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210005452371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210005452371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210005452371 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:54:55.505263 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Terminating (SIGTERM) 00:54:55.545629 run iperf3-srv_10.42.42.10(pid=5341): Terminating (SIGTERM) 00:54:55.585466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5342): Terminating (SIGTERM) 00:54:55.625451 run iperf3-srv_10.42.42.10(pid=5343): Terminating (SIGTERM) 00:54:55.665802 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5346): Terminating (SIGTERM) 00:54:55.705495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5349): Terminating (SIGTERM) 00:54:55.745397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5352): Terminating (SIGTERM) 00:54:55.754723 --- ParallelTerminationStrategy: PID 5340 died... 00:54:55.808287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5340): Terminated: ok {rc=0} 00:54:55.818000 --- ParallelTerminationStrategy: PID 5341 died... 00:54:55.871161 run iperf3-srv_10.42.42.10(pid=5341): Terminated {rc=256} 00:54:55.880471 --- ParallelTerminationStrategy: PID 5342 died... 00:54:55.933800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5342): Terminated: ok {rc=0} 00:54:55.943261 --- ParallelTerminationStrategy: PID 5343 died... 00:54:55.996513 run iperf3-srv_10.42.42.10(pid=5343): Terminated {rc=256} 00:54:56.006069 --- ParallelTerminationStrategy: PID 5346 died... 00:54:56.059139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5346): Terminated: ok {rc=0} 00:54:56.068651 --- ParallelTerminationStrategy: PID 5349 died... 00:54:56.122161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5349): Terminated: ok {rc=0} 00:54:56.131674 --- ParallelTerminationStrategy: PID 5352 died... 00:54:56.185089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5352): Terminated: ok {rc=0} 00:54:56.274026 bus /gobi_0: Setting Powered False 00:54:57.377500 bus /gobi_0: Setting Powered False 00:54:58.483992 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5350): Process ended prematurely: osmo-stp_10.42.42.5(pid=5350) [trial-2367↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5350)]