Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4131): Process ended prematurely: osmo-stp_10.42.42.5(pid=4131) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4131)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:48:51.772582 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:51.783396 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:48:51.924770 tst cs_paging_gprs_active.py: using LAC 24826 00:48:52.047565 tst cs_paging_gprs_active.py: using RAC 91 00:48:52.170950 tst cs_paging_gprs_active.py: using CellId 24826 00:48:52.294337 tst cs_paging_gprs_active.py: using BVCI 24827 00:48:52.318890 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.330190 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.341132 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.352449 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.363469 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.374643 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.385871 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.396679 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:48:52.407906 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:48:52.521525 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:48:52.811826 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:48:52.944835 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:53.273964 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4121): Launched 00:48:53.547567 run iperf3-srv_10.42.42.10(pid=4122): Launched 00:48:53.742521 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:48:53.875193 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:54.203820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4123): Launched 00:48:54.477125 run iperf3-srv_10.42.42.10(pid=4124): Launched 00:48:54.671823 tst cs_paging_gprs_active.py:38: start network... 00:48:54.804830 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:48:55.315487 run create_hlr_db(pid=4125): Launched 00:48:55.500030 bus /gobi_6: Setting Powered False 00:48:56.520642 run create_hlr_db(pid=4125): Terminated: ok {rc=0} 00:48:56.918394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4127): Launched 00:48:57.216647 run osmo-hlr_10.42.42.2(pid=4128): Launched 00:48:57.326803 run osmo-stp_10.42.42.5: Starting osmo-stp 00:48:57.841255 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4130): Launched 00:48:58.138614 run osmo-stp_10.42.42.5(pid=4131): Launched 00:48:58.247524 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:48:58.765506 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4133): Launched 00:48:58.871955 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:48:59.131618 run patchelf(pid=4134): Launched 00:48:59.305675 run osmo-stp_10.42.42.5(pid=4131): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4131)] 00:48:59.432444 run osmo-stp_10.42.42.5(pid=4131): stdout: | (launched: 2022-12-10_00:48:57.991865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:59.559826 run osmo-stp_10.42.42.5(pid=4131): stderr: | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004858163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:59.682903 run osmo-stp_10.42.42.5(pid=4131): stdout: | (launched: 2022-12-10_00:48:57.991865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:59.804512 run osmo-stp_10.42.42.5(pid=4131): stderr: | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004858162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004858163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004858163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:59.946086 run patchelf(pid=4134): Terminating (SIGINT) 00:49:00.112292 run patchelf(pid=4134): Terminated: ok {rc=0} 00:49:00.143053 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4131): Process ended prematurely: osmo-stp_10.42.42.5(pid=4131) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4131)] [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:49:00.152189 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 00:49:00.212266 run osmo-hlr_10.42.42.2(pid=4128): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4128)] 00:49:00.260684 run osmo-hlr_10.42.42.2(pid=4128): stdout: | (launched: 2022-12-10_00:48:57.069566) 00:49:00.310025 run osmo-hlr_10.42.42.2(pid=4128): stderr: | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004857245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004857257 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004857266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004857266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004857266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:49:00.351561 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4121): Terminating (SIGTERM) 00:49:00.391027 run iperf3-srv_10.42.42.10(pid=4122): Terminating (SIGTERM) 00:49:00.430402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4123): Terminating (SIGTERM) 00:49:00.469740 run iperf3-srv_10.42.42.10(pid=4124): Terminating (SIGTERM) 00:49:00.509012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4127): Terminating (SIGTERM) 00:49:00.548439 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4130): Terminating (SIGTERM) 00:49:00.587562 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4133): Terminating (SIGTERM) 00:49:00.597070 --- ParallelTerminationStrategy: PID 4121 died... 00:49:00.649606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4121): Terminated: ok {rc=0} 00:49:00.659096 --- ParallelTerminationStrategy: PID 4122 died... 00:49:00.711219 run iperf3-srv_10.42.42.10(pid=4122): Terminated {rc=256} 00:49:00.720799 --- ParallelTerminationStrategy: PID 4123 died... 00:49:00.772896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4123): Terminated: ok {rc=0} 00:49:00.782549 --- ParallelTerminationStrategy: PID 4124 died... 00:49:00.835475 run iperf3-srv_10.42.42.10(pid=4124): Terminated {rc=256} 00:49:00.846227 --- ParallelTerminationStrategy: PID 4127 died... 00:49:00.902412 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4127): Terminated: ok {rc=0} 00:49:00.912394 --- ParallelTerminationStrategy: PID 4130 died... 00:49:00.966118 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4130): Terminated: ok {rc=0} 00:49:00.976078 --- ParallelTerminationStrategy: PID 4133 died... 00:49:01.029216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4133): Terminated: ok {rc=0} 00:49:01.118675 bus /gobi_0: Setting Powered False 00:49:02.230595 bus /gobi_0: Setting Powered False 00:49:03.334717 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4131): Process ended prematurely: osmo-stp_10.42.42.5(pid=4131) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4131)]