Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3965): Process ended prematurely: osmo-stp_10.42.42.5(pid=3965) [trial-2367↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3965)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo ping.py ---------------------------------------------- 00:46:34.021579 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.033424 tst gprs:sysmo: Using 1 x bts (candidates: 1) 00:46:34.159706 tst ping.py: using LAC 24814 00:46:34.281070 tst ping.py: using RAC 79 00:46:34.401495 tst ping.py: using CellId 24814 00:46:34.520013 tst ping.py: using BVCI 24815 00:46:34.543247 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.553817 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.564315 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.575039 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.585669 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.596046 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.606754 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:34.617362 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:46:34.911600 tst ping.py:19: start network... 00:46:35.048014 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:46:35.573651 run create_hlr_db(pid=3959): Launched 00:46:35.762652 bus /gobi_6: Setting Powered False 00:46:36.783998 run create_hlr_db(pid=3959): Terminated: ok {rc=0} 00:46:37.196033 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3961): Launched 00:46:37.503435 run osmo-hlr_10.42.42.2(pid=3962): Launched 00:46:37.619587 run osmo-stp_10.42.42.5: Starting osmo-stp 00:46:38.149612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3964): Launched 00:46:38.456011 run osmo-stp_10.42.42.5(pid=3965): Launched 00:46:38.566351 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:46:39.098808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3967): Launched 00:46:39.206738 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:46:39.474708 run patchelf(pid=3968): Launched 00:46:39.652516 run osmo-stp_10.42.42.5(pid=3965): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3965)] 00:46:39.782787 run osmo-stp_10.42.42.5(pid=3965): stdout: | (launched: 2022-12-10_00:46:38.303396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:39.913204 run osmo-stp_10.42.42.5(pid=3965): stderr: | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004638477 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:40.039590 run osmo-stp_10.42.42.5(pid=3965): stdout: | (launched: 2022-12-10_00:46:38.303396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:40.165221 run osmo-stp_10.42.42.5(pid=3965): stderr: | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004638476 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004638477 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004638477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:40.309806 run patchelf(pid=3968): Terminating (SIGINT) 00:46:40.479417 run patchelf(pid=3968): Terminated: ok {rc=0} 00:46:40.509995 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=3965): Process ended prematurely: osmo-stp_10.42.42.5(pid=3965) [trial-2367↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3965)] [trial-2367↪gprs:sysmo↪ping.py:22] 00:46:40.518565 tst ping.py:22: Test FAILED (6.5 sec) 00:46:40.579942 run osmo-hlr_10.42.42.2(pid=3962): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3962)] 00:46:40.629996 run osmo-hlr_10.42.42.2(pid=3962): stdout: | (launched: 2022-12-10_00:46:37.350434) 00:46:40.680539 run osmo-hlr_10.42.42.2(pid=3962): stderr: | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004637527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004637540 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004637552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004637552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004637552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:46:40.723369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3961): Terminating (SIGTERM) 00:46:40.764477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3964): Terminating (SIGTERM) 00:46:40.805713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3967): Terminating (SIGTERM) 00:46:40.815628 --- ParallelTerminationStrategy: PID 3961 died... 00:46:40.870509 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3961): Terminated: ok {rc=0} 00:46:40.880178 --- ParallelTerminationStrategy: PID 3964 died... 00:46:40.934738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3964): Terminated: ok {rc=0} 00:46:40.944514 --- ParallelTerminationStrategy: PID 3967 died... 00:46:40.998495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3967): Terminated: ok {rc=0} 00:46:41.089462 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3965): Process ended prematurely: osmo-stp_10.42.42.5(pid=3965) [trial-2367↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3965)]