Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.iperf3.py (from gprs_trx-b200)

Failing for the past 50 builds (Since #2318 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2367↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-b200 iperf3.py
----------------------------------------------
01:02:35.420661 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:35.432431 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
01:02:35.577890 tst                        iperf3.py: using LAC 24900
01:02:35.697826 tst                        iperf3.py: using RAC 165
01:02:35.817115 tst                        iperf3.py: using CellId 24900
01:02:35.939041 tst                        iperf3.py: using BVCI 24901
01:02:35.962494 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:35.973248 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:35.983911 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:35.995019 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:36.005996 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:36.016839 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:36.027950 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:36.038955 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
01:02:36.050128 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
01:02:36.345168 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:02:36.481286 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:02:36.818930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Launched
01:02:37.098889 run iperf3-srv_10.42.42.10(pid=5901): Launched
01:02:37.298658 tst                      iperf3.py:8: start network...
01:02:37.434675 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:02:37.954456 run          create_hlr_db(pid=5902): Launched
01:02:38.148064 bus                          /gobi_6: Setting Powered False
01:02:39.162684 run          create_hlr_db(pid=5902): Terminated: ok {rc=0}
01:02:39.595809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Launched
01:02:39.922345 run    osmo-hlr_10.42.42.2(pid=5905): Launched
01:02:40.041196 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:02:40.608538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Launched
01:02:40.935565 run    osmo-stp_10.42.42.5(pid=5908): Launched
01:02:41.053724 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:02:41.619581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Launched
01:02:41.735090 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:02:42.018461 run               patchelf(pid=5911): Launched
01:02:42.209219 run    osmo-stp_10.42.42.5(pid=5908): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]
01:02:42.348093 run    osmo-stp_10.42.42.5(pid=5908): stdout: 
| (launched: 2022-12-10_01:02:40.775206)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:42.487205 run    osmo-stp_10.42.42.5(pid=5908): stderr: 
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210010240969 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:42.622306 run    osmo-stp_10.42.42.5(pid=5908): stdout: 
| (launched: 2022-12-10_01:02:40.775206)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:42.756363 run    osmo-stp_10.42.42.5(pid=5908): stderr: 
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210010240968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210010240969 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010240969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:42.911194 run               patchelf(pid=5911): Terminating (SIGINT)
01:02:43.092710 run               patchelf(pid=5911): Terminated: ok {rc=0}
01:02:43.126604 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2367↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]  [trial-2367↪gprs:trx-b200↪iperf3.py:8]
01:02:43.136255 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:02:43.199170 run    osmo-hlr_10.42.42.2(pid=5905): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5905)]
01:02:43.250294 run    osmo-hlr_10.42.42.2(pid=5905): stdout: 
| (launched: 2022-12-10_01:02:39.761553) 
01:02:43.302143 run    osmo-hlr_10.42.42.2(pid=5905): stderr: 
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210010239964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210010239982 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210010239991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210010239991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210010239991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:02:43.346489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Terminating (SIGTERM)
01:02:43.388201 run iperf3-srv_10.42.42.10(pid=5901): Terminating (SIGTERM)
01:02:43.430137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Terminating (SIGTERM)
01:02:43.471864 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Terminating (SIGTERM)
01:02:43.513720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Terminating (SIGTERM)
01:02:43.523365 ---      ParallelTerminationStrategy: PID 5900 died...
01:02:43.579518 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Terminated: ok {rc=0}
01:02:43.589560 ---      ParallelTerminationStrategy: PID 5901 died...
01:02:43.644777 run iperf3-srv_10.42.42.10(pid=5901): Terminated {rc=256}
01:02:43.654722 ---      ParallelTerminationStrategy: PID 5904 died...
01:02:43.710034 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Terminated: ok {rc=0}
01:02:43.720025 ---      ParallelTerminationStrategy: PID 5907 died...
01:02:43.775365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Terminated: ok {rc=0}
01:02:43.785422 ---      ParallelTerminationStrategy: PID 5910 died...
01:02:43.840792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Terminated: ok {rc=0}
01:02:43.928150 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2367↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]