Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9045): Process ended prematurely: osmo-stp_10.42.42.5(pid=9045) [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9045)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-lms+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 01:32:12.000159 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.012227 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:32:12.180370 tst ping_idle_ping.py: using LAC 25056 01:32:12.299728 tst ping_idle_ping.py: using RAC 66 01:32:12.415479 tst ping_idle_ping.py: using CellId 25056 01:32:12.537696 tst ping_idle_ping.py: using BVCI 25057 01:32:12.560996 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.572036 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.582916 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.594747 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.605885 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.617270 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.628801 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:12.639950 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:32:12.912822 tst ping_idle_ping.py:24: start network... 01:32:13.036169 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:32:13.511908 run create_hlr_db(pid=9039): Launched 01:32:13.683825 bus /gobi_6: Setting Powered False 01:32:14.706115 run create_hlr_db(pid=9039): Terminated: ok {rc=0} 01:32:15.132222 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9041): Launched 01:32:15.453288 run osmo-hlr_10.42.42.2(pid=9042): Launched 01:32:15.570987 run osmo-stp_10.42.42.5: Starting osmo-stp 01:32:16.165485 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9044): Launched 01:32:16.624533 run osmo-stp_10.42.42.5(pid=9045): Launched 01:32:16.868740 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:32:17.438758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9047): Launched 01:32:17.545217 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:32:17.806046 run patchelf(pid=9048): Launched 01:32:17.979685 run osmo-stp_10.42.42.5(pid=9045): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9045)] 01:32:18.106630 run osmo-stp_10.42.42.5(pid=9045): stdout: | (launched: 2022-12-10_01:32:16.321783) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:18.233598 run osmo-stp_10.42.42.5(pid=9045): stderr: | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013216529 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:18.356360 run osmo-stp_10.42.42.5(pid=9045): stdout: | (launched: 2022-12-10_01:32:16.321783) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:18.478421 run osmo-stp_10.42.42.5(pid=9045): stderr: | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013216528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013216529 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013216529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:18.619943 run patchelf(pid=9048): Terminating (SIGINT) 01:32:18.786502 run patchelf(pid=9048): Terminated: ok {rc=0} 01:32:18.816889 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9045): Process ended prematurely: osmo-stp_10.42.42.5(pid=9045) [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9045)] [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 01:32:18.825498 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 01:32:18.886339 run osmo-hlr_10.42.42.2(pid=9042): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9042)] 01:32:18.935391 run osmo-hlr_10.42.42.2(pid=9042): stdout: | (launched: 2022-12-10_01:32:15.294696) 01:32:18.984778 run osmo-hlr_10.42.42.2(pid=9042): stderr: | �[0;m�[1;31m20221210013215491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210013215491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210013215492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210013215492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210013215492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210013215492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210013215504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-lms+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210013215513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210013215513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210013215513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:32:19.027136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9041): Terminating (SIGTERM) 01:32:19.067134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9044): Terminating (SIGTERM) 01:32:19.107006 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9047): Terminating (SIGTERM) 01:32:19.116695 --- ParallelTerminationStrategy: PID 9041 died... 01:32:19.169998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9041): Terminated: ok {rc=0} 01:32:19.179923 --- ParallelTerminationStrategy: PID 9044 died... 01:32:19.233341 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9044): Terminated: ok {rc=0} 01:32:19.242978 --- ParallelTerminationStrategy: PID 9047 died... 01:32:19.295686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9047): Terminated: ok {rc=0} 01:32:19.384793 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9045): Process ended prematurely: osmo-stp_10.42.42.5(pid=9045) [trial-2367↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9045)]