Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14061): Process ended prematurely: osmo-stp_10.42.42.5(pid=14061) [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14061)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 02:31:29.429347 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:29.441630 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:31:29.587821 tst ping_idle_ping.py: using LAC 25369 02:31:29.712798 tst ping_idle_ping.py: using RAC 124 02:31:29.837592 tst ping_idle_ping.py: using CellId 25369 02:31:29.962060 tst ping_idle_ping.py: using BVCI 25370 02:31:29.986522 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:29.997874 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.009012 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.020097 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.031297 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.042356 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.053709 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:30.064705 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:31:30.357854 tst ping_idle_ping.py:24: start network... 02:31:30.491729 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:31.041710 run create_hlr_db(pid=14055): Launched 02:31:31.221187 bus /gobi_6: Setting Powered False 02:31:32.243150 run create_hlr_db(pid=14055): Terminated: ok {rc=0} 02:31:32.646869 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14057): Launched 02:31:32.948215 run osmo-hlr_10.42.42.2(pid=14058): Launched 02:31:33.063387 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:33.592519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14060): Launched 02:31:33.892432 run osmo-stp_10.42.42.5(pid=14061): Launched 02:31:34.002152 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:34.523577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14063): Launched 02:31:34.630453 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:34.892773 run patchelf(pid=14064): Launched 02:31:35.070194 run osmo-stp_10.42.42.5(pid=14061): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14061)] 02:31:35.199188 run osmo-stp_10.42.42.5(pid=14061): stdout: | (launched: 2022-12-10_02:31:33.744307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:35.328384 run osmo-stp_10.42.42.5(pid=14061): stderr: | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023133916 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:35.453200 run osmo-stp_10.42.42.5(pid=14061): stdout: | (launched: 2022-12-10_02:31:33.744307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:35.576083 run osmo-stp_10.42.42.5(pid=14061): stderr: | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023133915 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023133916 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023133916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:35.719631 run patchelf(pid=14064): Terminating (SIGINT) 02:31:35.889140 run patchelf(pid=14064): Terminated: ok {rc=0} 02:31:35.919729 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=14061): Process ended prematurely: osmo-stp_10.42.42.5(pid=14061) [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14061)] [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 02:31:35.928287 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 02:31:35.988941 run osmo-hlr_10.42.42.2(pid=14058): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14058)] 02:31:36.038223 run osmo-hlr_10.42.42.2(pid=14058): stdout: | (launched: 2022-12-10_02:31:32.799077) 02:31:36.088329 run osmo-hlr_10.42.42.2(pid=14058): stderr: | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023132977 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023132990 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023133000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023133000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023133000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:36.130414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14057): Terminating (SIGTERM) 02:31:36.170553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14060): Terminating (SIGTERM) 02:31:36.210836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14063): Terminating (SIGTERM) 02:31:36.220426 --- ParallelTerminationStrategy: PID 14057 died... 02:31:36.274681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14057): Terminated: ok {rc=0} 02:31:36.284342 --- ParallelTerminationStrategy: PID 14060 died... 02:31:36.338110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14060): Terminated: ok {rc=0} 02:31:36.347779 --- ParallelTerminationStrategy: PID 14063 died... 02:31:36.401605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14063): Terminated: ok {rc=0} 02:31:36.490725 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14061): Process ended prematurely: osmo-stp_10.42.42.5(pid=14061) [trial-2368↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14061)]