Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=16512): Process ended prematurely: osmo-stp_10.42.42.5(pid=16512) [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16512)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:58:40.783787 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:40.794819 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:58:40.952788 tst cs_paging_gprs_active.py: using LAC 25513 02:58:41.072434 tst cs_paging_gprs_active.py: using RAC 13 02:58:41.192490 tst cs_paging_gprs_active.py: using CellId 25513 02:58:41.320461 tst cs_paging_gprs_active.py: using BVCI 25514 02:58:41.345823 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.357277 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.368448 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.380325 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.392042 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.404038 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.416160 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.427783 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:58:41.439667 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:58:41.559821 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:58:41.843973 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:58:41.971274 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:58:42.286219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16502): Launched 02:58:42.548352 run iperf3-srv_10.42.42.10(pid=16503): Launched 02:58:42.733941 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:58:42.860383 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:58:43.174476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16504): Launched 02:58:43.436373 run iperf3-srv_10.42.42.10(pid=16505): Launched 02:58:43.621629 tst cs_paging_gprs_active.py:38: start network... 02:58:43.747672 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:58:44.229861 run create_hlr_db(pid=16506): Launched 02:58:44.404789 bus /gobi_6: Setting Powered False 02:58:45.427774 run create_hlr_db(pid=16506): Terminated: ok {rc=0} 02:58:45.833237 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16508): Launched 02:58:46.240334 run osmo-hlr_10.42.42.2(pid=16509): Launched 02:58:46.452613 run osmo-stp_10.42.42.5: Starting osmo-stp 02:58:47.140524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16511): Launched 02:58:47.471521 run osmo-stp_10.42.42.5(pid=16512): Launched 02:58:47.593150 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:58:48.165077 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16514): Launched 02:58:48.281133 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:58:48.565987 run patchelf(pid=16515): Launched 02:58:48.758069 run osmo-stp_10.42.42.5(pid=16512): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16512)] 02:58:48.897067 run osmo-stp_10.42.42.5(pid=16512): stdout: | (launched: 2022-12-10_02:58:47.308529) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:58:49.035968 run osmo-stp_10.42.42.5(pid=16512): stderr: | �[0;m�[38;5;43m20221210025847500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025847501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025847501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025847501 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:58:49.171185 run osmo-stp_10.42.42.5(pid=16512): stdout: | (launched: 2022-12-10_02:58:47.308529) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:58:49.304759 run osmo-stp_10.42.42.5(pid=16512): stderr: | �[0;m�[38;5;43m20221210025847500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025847501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025847501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025847501 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025847502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:58:49.459707 run patchelf(pid=16515): Terminating (SIGINT) 02:58:49.642822 run patchelf(pid=16515): Terminated: ok {rc=0} 02:58:49.676017 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16512): Process ended prematurely: osmo-stp_10.42.42.5(pid=16512) [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16512)] [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:58:49.685792 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:58:49.748422 run osmo-hlr_10.42.42.2(pid=16509): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16509)] 02:58:49.799665 run osmo-hlr_10.42.42.2(pid=16509): stdout: | (launched: 2022-12-10_02:58:45.995033) 02:58:49.851758 run osmo-hlr_10.42.42.2(pid=16509): stderr: | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025846344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025846359 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025846367 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025846367 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025846368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:58:49.895650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16502): Terminating (SIGTERM) 02:58:49.937359 run iperf3-srv_10.42.42.10(pid=16503): Terminating (SIGTERM) 02:58:49.979048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16504): Terminating (SIGTERM) 02:58:50.020216 run iperf3-srv_10.42.42.10(pid=16505): Terminating (SIGTERM) 02:58:50.061652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16508): Terminating (SIGTERM) 02:58:50.102902 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16511): Terminating (SIGTERM) 02:58:50.144189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16514): Terminating (SIGTERM) 02:58:50.153845 --- ParallelTerminationStrategy: PID 16502 died... 02:58:50.208897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16502): Terminated: ok {rc=0} 02:58:50.218936 --- ParallelTerminationStrategy: PID 16503 died... 02:58:50.273997 run iperf3-srv_10.42.42.10(pid=16503): Terminated {rc=256} 02:58:50.283893 --- ParallelTerminationStrategy: PID 16504 died... 02:58:50.339495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16504): Terminated: ok {rc=0} 02:58:50.349465 --- ParallelTerminationStrategy: PID 16505 died... 02:58:50.404537 run iperf3-srv_10.42.42.10(pid=16505): Terminated {rc=256} 02:58:50.414434 --- ParallelTerminationStrategy: PID 16508 died... 02:58:50.469252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16508): Terminated: ok {rc=0} 02:58:50.479128 --- ParallelTerminationStrategy: PID 16511 died... 02:58:50.533955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16511): Terminated: ok {rc=0} 02:58:50.544255 --- ParallelTerminationStrategy: PID 16514 died... 02:58:50.599398 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16514): Terminated: ok {rc=0} 02:58:50.686229 bus /gobi_0: Setting Powered False 02:58:51.791681 bus /gobi_0: Setting Powered False 02:58:52.901414 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16512): Process ended prematurely: osmo-stp_10.42.42.5(pid=16512) [trial-2368↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16512)]