Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=28491): Process ended prematurely: osmo-stp_10.42.42.5(pid=28491) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28491)]
Standard Output
---------------------------------------------- trial-2369 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 04:46:54.074084 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.086697 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:46:54.239073 tst iperf3m4.py: using LAC 26089 04:46:54.363446 tst iperf3m4.py: using RAC 79 04:46:54.488903 tst iperf3m4.py: using CellId 26089 04:46:54.614093 tst iperf3m4.py: using BVCI 26090 04:46:54.638556 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.650422 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.662142 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.674469 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.687141 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.698740 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.711080 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.723639 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:54.735545 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:54.855722 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:54.974013 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:55.093846 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:55.385540 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 04:46:55.520454 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:55.852258 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28477): Launched 04:46:56.127475 run iperf3-srv_10.42.42.10(pid=28478): Launched 04:46:56.324464 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 04:46:56.458423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:56.790070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28479): Launched 04:46:57.065140 run iperf3-srv_10.42.42.10(pid=28480): Launched 04:46:57.262128 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 04:46:57.395802 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:57.727175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28481): Launched 04:46:58.002544 run iperf3-srv_10.42.42.10(pid=28482): Launched 04:46:58.199406 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 04:46:58.333334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:58.665021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28483): Launched 04:46:58.940699 run iperf3-srv_10.42.42.10(pid=28484): Launched 04:46:59.137692 tst iperf3m4.py:8: start network... 04:46:59.271818 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:46:59.785484 run create_hlr_db(pid=28485): Launched 04:46:59.970787 bus /gobi_6: Setting Powered False 04:47:01.004788 run create_hlr_db(pid=28485): Terminated: ok {rc=0} 04:47:01.457139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28487): Launched 04:47:01.953595 run osmo-hlr_10.42.42.2(pid=28488): Launched 04:47:02.170498 run osmo-stp_10.42.42.5: Starting osmo-stp 04:47:02.753307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28490): Launched 04:47:03.055080 run osmo-stp_10.42.42.5(pid=28491): Launched 04:47:03.165022 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:47:03.690770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28493): Launched 04:47:03.798674 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:47:04.061950 run patchelf(pid=28494): Launched 04:47:04.238682 run osmo-stp_10.42.42.5(pid=28491): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28491)] 04:47:04.368033 run osmo-stp_10.42.42.5(pid=28491): stdout: | (launched: 2022-12-10_04:47:02.907112) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:04.498176 run osmo-stp_10.42.42.5(pid=28491): stderr: | �[0;m�[38;5;43m20221210044703075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044703076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044703076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044703076 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044703078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044703079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044703079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:04.623055 run osmo-stp_10.42.42.5(pid=28491): stdout: | (launched: 2022-12-10_04:47:02.907112) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:04.746812 run osmo-stp_10.42.42.5(pid=28491): stderr: | �[0;m�[38;5;43m20221210044703075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044703076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044703076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044703076 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044703078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044703079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044703079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:04.891294 run patchelf(pid=28494): Terminating (SIGINT) 04:47:05.060768 run patchelf(pid=28494): Terminated: ok {rc=0} 04:47:05.092156 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28491): Process ended prematurely: osmo-stp_10.42.42.5(pid=28491) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28491)] [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 04:47:05.101706 tst iperf3m4.py:8: Test FAILED (11.1 sec) 04:47:05.162602 run osmo-hlr_10.42.42.2(pid=28488): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28488)] 04:47:05.211449 run osmo-hlr_10.42.42.2(pid=28488): stdout: | (launched: 2022-12-10_04:47:01.667981) 04:47:05.260778 run osmo-hlr_10.42.42.2(pid=28488): stderr: | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210044701915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210044701929 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210044701945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210044701945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210044701945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:47:05.302581 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28477): Terminating (SIGTERM) 04:47:05.342409 run iperf3-srv_10.42.42.10(pid=28478): Terminating (SIGTERM) 04:47:05.382216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28479): Terminating (SIGTERM) 04:47:05.421913 run iperf3-srv_10.42.42.10(pid=28480): Terminating (SIGTERM) 04:47:05.461685 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28481): Terminating (SIGTERM) 04:47:05.501552 run iperf3-srv_10.42.42.10(pid=28482): Terminating (SIGTERM) 04:47:05.541450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28483): Terminating (SIGTERM) 04:47:05.581006 run iperf3-srv_10.42.42.10(pid=28484): Terminating (SIGTERM) 04:47:05.621085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28487): Terminating (SIGTERM) 04:47:05.660562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28490): Terminating (SIGTERM) 04:47:05.700288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28493): Terminating (SIGTERM) 04:47:05.709817 --- ParallelTerminationStrategy: PID 28477 died... 04:47:05.762932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28477): Terminated: ok {rc=0} 04:47:05.772886 --- ParallelTerminationStrategy: PID 28478 died... 04:47:05.826016 run iperf3-srv_10.42.42.10(pid=28478): Terminated {rc=256} 04:47:05.835938 --- ParallelTerminationStrategy: PID 28479 died... 04:47:05.888781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28479): Terminated: ok {rc=0} 04:47:05.898525 --- ParallelTerminationStrategy: PID 28480 died... 04:47:05.951227 run iperf3-srv_10.42.42.10(pid=28480): Terminated {rc=256} 04:47:05.961037 --- ParallelTerminationStrategy: PID 28481 died... 04:47:06.013715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28481): Terminated: ok {rc=0} 04:47:06.023414 --- ParallelTerminationStrategy: PID 28482 died... 04:47:06.076391 run iperf3-srv_10.42.42.10(pid=28482): Terminated {rc=256} 04:47:06.085966 --- ParallelTerminationStrategy: PID 28483 died... 04:47:06.138677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28483): Terminated: ok {rc=0} 04:47:06.148444 --- ParallelTerminationStrategy: PID 28484 died... 04:47:06.201401 run iperf3-srv_10.42.42.10(pid=28484): Terminated {rc=256} 04:47:06.210825 --- ParallelTerminationStrategy: PID 28487 died... 04:47:06.263977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28487): Terminated: ok {rc=0} 04:47:06.273946 --- ParallelTerminationStrategy: PID 28490 died... 04:47:06.327050 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28490): Terminated: ok {rc=0} 04:47:06.336624 --- ParallelTerminationStrategy: PID 28493 died... 04:47:06.389514 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28493): Terminated: ok {rc=0} 04:47:06.477331 bus /gobi_4: Setting Powered False 04:47:07.580510 bus /gobi_4: Setting Powered False 04:47:08.686894 bus /gobi_1: Setting Powered False 04:47:09.792624 bus /gobi_1: Setting Powered False 04:47:10.899839 bus /gobi_0: Setting Powered False 04:47:12.000666 bus /gobi_0: Setting Powered False 04:47:13.111847 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28491): Process ended prematurely: osmo-stp_10.42.42.5(pid=28491) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28491)]