Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25140): Process ended prematurely: osmo-stp_10.42.42.5(pid=25140) [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25140)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 04:14:37.023674 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.034621 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:14:37.169839 tst cs_paging_gprs_active.py: using LAC 25917 04:14:37.285748 tst cs_paging_gprs_active.py: using RAC 162 04:14:37.409386 tst cs_paging_gprs_active.py: using CellId 25917 04:14:37.533097 tst cs_paging_gprs_active.py: using BVCI 25918 04:14:37.557483 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.568875 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.580125 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.591528 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.602644 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.613778 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.624907 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.635921 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:14:37.647692 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:14:37.766226 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:14:38.054759 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:14:38.188891 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:14:38.515556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25130): Launched 04:14:38.786211 run iperf3-srv_10.42.42.10(pid=25131): Launched 04:14:38.981310 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:14:39.113550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:14:39.439331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25132): Launched 04:14:39.710129 run iperf3-srv_10.42.42.10(pid=25133): Launched 04:14:39.904688 tst cs_paging_gprs_active.py:38: start network... 04:14:40.036938 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:14:40.542796 run create_hlr_db(pid=25134): Launched 04:14:40.726169 bus /gobi_6: Setting Powered False 04:14:41.746898 run create_hlr_db(pid=25134): Terminated: ok {rc=0} 04:14:42.168255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25136): Launched 04:14:42.482884 run osmo-hlr_10.42.42.2(pid=25137): Launched 04:14:42.598689 run osmo-stp_10.42.42.5: Starting osmo-stp 04:14:43.145726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25139): Launched 04:14:43.460289 run osmo-stp_10.42.42.5(pid=25140): Launched 04:14:43.574517 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:14:44.123760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25142): Launched 04:14:44.236394 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:14:44.510139 run patchelf(pid=25143): Launched 04:14:44.694956 run osmo-stp_10.42.42.5(pid=25140): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25140)] 04:14:44.830703 run osmo-stp_10.42.42.5(pid=25140): stdout: | (launched: 2022-12-10_04:14:43.306227) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:14:44.966388 run osmo-stp_10.42.42.5(pid=25140): stderr: | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210041443499 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:14:45.097346 run osmo-stp_10.42.42.5(pid=25140): stdout: | (launched: 2022-12-10_04:14:43.306227) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:14:45.226539 run osmo-stp_10.42.42.5(pid=25140): stderr: | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210041443499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210041443499 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210041443500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:14:45.377398 run patchelf(pid=25143): Terminating (SIGINT) 04:14:45.554592 run patchelf(pid=25143): Terminated: ok {rc=0} 04:14:45.587390 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25140): Process ended prematurely: osmo-stp_10.42.42.5(pid=25140) [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25140)] [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 04:14:45.597379 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 04:14:45.658937 run osmo-hlr_10.42.42.2(pid=25137): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25137)] 04:14:45.709262 run osmo-hlr_10.42.42.2(pid=25137): stdout: | (launched: 2022-12-10_04:14:42.329333) 04:14:45.760136 run osmo-hlr_10.42.42.2(pid=25137): stderr: | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210041442527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210041442540 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210041442548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210041442549 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210041442549 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:14:45.804093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25130): Terminating (SIGTERM) 04:14:45.855629 run iperf3-srv_10.42.42.10(pid=25131): Terminating (SIGTERM) 04:14:45.897723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25132): Terminating (SIGTERM) 04:14:45.939436 run iperf3-srv_10.42.42.10(pid=25133): Terminating (SIGTERM) 04:14:45.981497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25136): Terminating (SIGTERM) 04:14:46.023096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25139): Terminating (SIGTERM) 04:14:46.064832 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25142): Terminating (SIGTERM) 04:14:46.075091 --- ParallelTerminationStrategy: PID 25130 died... 04:14:46.132517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25130): Terminated: ok {rc=0} 04:14:46.143186 --- ParallelTerminationStrategy: PID 25131 died... 04:14:46.198792 run iperf3-srv_10.42.42.10(pid=25131): Terminated {rc=256} 04:14:46.209269 --- ParallelTerminationStrategy: PID 25132 died... 04:14:46.264680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25132): Terminated: ok {rc=0} 04:14:46.275209 --- ParallelTerminationStrategy: PID 25133 died... 04:14:46.330788 run iperf3-srv_10.42.42.10(pid=25133): Terminated {rc=256} 04:14:46.341204 --- ParallelTerminationStrategy: PID 25136 died... 04:14:46.397192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25136): Terminated: ok {rc=0} 04:14:46.408181 --- ParallelTerminationStrategy: PID 25139 died... 04:14:46.464837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25139): Terminated: ok {rc=0} 04:14:46.475690 --- ParallelTerminationStrategy: PID 25142 died... 04:14:46.531694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25142): Terminated: ok {rc=0} 04:14:46.632241 bus /gobi_0: Setting Powered False 04:14:47.738283 bus /gobi_0: Setting Powered False 04:14:48.847913 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25140): Process ended prematurely: osmo-stp_10.42.42.5(pid=25140) [trial-2369↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25140)]