Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=28461): Process ended prematurely: osmo-stp_10.42.42.5(pid=28461) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28461)]
Standard Output
---------------------------------------------- trial-2369 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 04:46:32.094564 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.108122 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:46:32.255253 tst cs_paging_gprs_active.py: using LAC 26087 04:46:32.379355 tst cs_paging_gprs_active.py: using RAC 77 04:46:32.502739 tst cs_paging_gprs_active.py: using CellId 26087 04:46:32.626204 tst cs_paging_gprs_active.py: using BVCI 26088 04:46:32.650754 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.662662 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.674913 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.687046 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.698807 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.710633 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.722525 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.734586 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:32.746884 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:32.862624 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:33.141035 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:46:33.267231 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:33.579025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28451): Launched 04:46:33.837928 run iperf3-srv_10.42.42.10(pid=28452): Launched 04:46:34.021746 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:46:34.147058 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:34.459034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28453): Launched 04:46:34.717886 run iperf3-srv_10.42.42.10(pid=28454): Launched 04:46:34.901615 tst cs_paging_gprs_active.py:38: start network... 04:46:35.026808 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:46:35.518058 run create_hlr_db(pid=28455): Launched 04:46:35.704711 bus /gobi_6: Setting Powered False 04:46:36.725839 run create_hlr_db(pid=28455): Terminated: ok {rc=0} 04:46:37.131641 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28457): Launched 04:46:37.431891 run osmo-hlr_10.42.42.2(pid=28458): Launched 04:46:37.550600 run osmo-stp_10.42.42.5: Starting osmo-stp 04:46:38.079359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28460): Launched 04:46:38.379223 run osmo-stp_10.42.42.5(pid=28461): Launched 04:46:38.488294 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:46:39.013265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28463): Launched 04:46:39.120128 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:46:39.383206 run patchelf(pid=28464): Launched 04:46:39.559615 run osmo-stp_10.42.42.5(pid=28461): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28461)] 04:46:39.689349 run osmo-stp_10.42.42.5(pid=28461): stdout: | (launched: 2022-12-10_04:46:38.232219) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:46:39.819214 run osmo-stp_10.42.42.5(pid=28461): stderr: | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044638403 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:46:39.943716 run osmo-stp_10.42.42.5(pid=28461): stdout: | (launched: 2022-12-10_04:46:38.232219) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:46:40.067677 run osmo-stp_10.42.42.5(pid=28461): stderr: | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044638402 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044638403 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044638405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:46:40.211808 run patchelf(pid=28464): Terminating (SIGINT) 04:46:40.381211 run patchelf(pid=28464): Terminated: ok {rc=0} 04:46:40.412402 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28461): Process ended prematurely: osmo-stp_10.42.42.5(pid=28461) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28461)] [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 04:46:40.422139 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 04:46:40.482565 run osmo-hlr_10.42.42.2(pid=28458): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28458)] 04:46:40.531780 run osmo-hlr_10.42.42.2(pid=28458): stdout: | (launched: 2022-12-10_04:46:37.284587) 04:46:40.581979 run osmo-hlr_10.42.42.2(pid=28458): stderr: | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210044637463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210044637475 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210044637484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210044637484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210044637484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:46:40.623757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28451): Terminating (SIGTERM) 04:46:40.663560 run iperf3-srv_10.42.42.10(pid=28452): Terminating (SIGTERM) 04:46:40.703528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28453): Terminating (SIGTERM) 04:46:40.743184 run iperf3-srv_10.42.42.10(pid=28454): Terminating (SIGTERM) 04:46:40.783244 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28457): Terminating (SIGTERM) 04:46:40.823201 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28460): Terminating (SIGTERM) 04:46:40.862829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28463): Terminating (SIGTERM) 04:46:40.872154 --- ParallelTerminationStrategy: PID 28451 died... 04:46:40.925488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28451): Terminated: ok {rc=0} 04:46:40.935301 --- ParallelTerminationStrategy: PID 28452 died... 04:46:40.988498 run iperf3-srv_10.42.42.10(pid=28452): Terminated {rc=256} 04:46:40.998054 --- ParallelTerminationStrategy: PID 28453 died... 04:46:41.051983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28453): Terminated: ok {rc=0} 04:46:41.061600 --- ParallelTerminationStrategy: PID 28454 died... 04:46:41.114529 run iperf3-srv_10.42.42.10(pid=28454): Terminated {rc=256} 04:46:41.124306 --- ParallelTerminationStrategy: PID 28457 died... 04:46:41.177228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28457): Terminated: ok {rc=0} 04:46:41.186945 --- ParallelTerminationStrategy: PID 28460 died... 04:46:41.240169 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28460): Terminated: ok {rc=0} 04:46:41.249766 --- ParallelTerminationStrategy: PID 28463 died... 04:46:41.303051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28463): Terminated: ok {rc=0} 04:46:41.392360 bus /gobi_0: Setting Powered False 04:46:42.496907 bus /gobi_0: Setting Powered False 04:46:43.607775 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28461): Process ended prematurely: osmo-stp_10.42.42.5(pid=28461) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28461)]