Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=28473): Process ended prematurely: osmo-stp_10.42.42.5(pid=28473) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28473)]
Standard Output
---------------------------------------------- trial-2369 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 04:46:44.720564 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:44.733083 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:46:44.878089 tst iperf3.py: using LAC 26088 04:46:45.003714 tst iperf3.py: using RAC 78 04:46:45.129028 tst iperf3.py: using CellId 26088 04:46:45.253677 tst iperf3.py: using BVCI 26089 04:46:45.278241 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.290305 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.302137 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.313847 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.325730 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.337592 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.349563 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.361262 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:46:45.373288 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:46:45.663724 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:46:45.797587 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:46:46.146705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28465): Launched 04:46:46.437539 run iperf3-srv_10.42.42.10(pid=28466): Launched 04:46:46.637392 tst iperf3.py:8: start network... 04:46:46.773667 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:46:47.294575 run create_hlr_db(pid=28467): Launched 04:46:47.480373 bus /gobi_6: Setting Powered False 04:46:48.501639 run create_hlr_db(pid=28467): Terminated: ok {rc=0} 04:46:48.904518 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28469): Launched 04:46:49.204239 run osmo-hlr_10.42.42.2(pid=28470): Launched 04:46:49.320801 run osmo-stp_10.42.42.5: Starting osmo-stp 04:46:49.847160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28472): Launched 04:46:50.147080 run osmo-stp_10.42.42.5(pid=28473): Launched 04:46:50.265235 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:46:50.793451 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28475): Launched 04:46:50.900608 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:46:51.163082 run patchelf(pid=28476): Launched 04:46:51.339463 run osmo-stp_10.42.42.5(pid=28473): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28473)] 04:46:51.469552 run osmo-stp_10.42.42.5(pid=28473): stdout: | (launched: 2022-12-10_04:46:49.999430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:46:51.599251 run osmo-stp_10.42.42.5(pid=28473): stderr: | �[0;m�[38;5;43m20221210044650169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044650169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044650170 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044650170 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044650170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044650170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044650171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:46:51.724213 run osmo-stp_10.42.42.5(pid=28473): stdout: | (launched: 2022-12-10_04:46:49.999430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:46:51.847705 run osmo-stp_10.42.42.5(pid=28473): stderr: | �[0;m�[38;5;43m20221210044650169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044650169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044650170 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044650170 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044650170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044650170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044650171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:46:51.991808 run patchelf(pid=28476): Terminating (SIGINT) 04:46:52.161256 run patchelf(pid=28476): Terminated: ok {rc=0} 04:46:52.192602 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28473): Process ended prematurely: osmo-stp_10.42.42.5(pid=28473) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28473)] [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 04:46:52.202716 tst iperf3.py:8: Test FAILED (7.5 sec) 04:46:52.262915 run osmo-hlr_10.42.42.2(pid=28470): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28470)] 04:46:52.311656 run osmo-hlr_10.42.42.2(pid=28470): stdout: | (launched: 2022-12-10_04:46:49.056538) 04:46:52.361255 run osmo-hlr_10.42.42.2(pid=28470): stderr: | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210044649233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210044649244 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210044649254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210044649254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210044649254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:46:52.402993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28465): Terminating (SIGTERM) 04:46:52.442591 run iperf3-srv_10.42.42.10(pid=28466): Terminating (SIGTERM) 04:46:52.482176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28469): Terminating (SIGTERM) 04:46:52.521636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28472): Terminating (SIGTERM) 04:46:52.561262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28475): Terminating (SIGTERM) 04:46:52.570551 --- ParallelTerminationStrategy: PID 28465 died... 04:46:52.623195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28465): Terminated: ok {rc=0} 04:46:52.632867 --- ParallelTerminationStrategy: PID 28466 died... 04:46:52.685517 run iperf3-srv_10.42.42.10(pid=28466): Terminated {rc=256} 04:46:52.695055 --- ParallelTerminationStrategy: PID 28469 died... 04:46:52.747661 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28469): Terminated: ok {rc=0} 04:46:52.757474 --- ParallelTerminationStrategy: PID 28472 died... 04:46:52.810196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28472): Terminated: ok {rc=0} 04:46:52.819954 --- ParallelTerminationStrategy: PID 28475 died... 04:46:52.872819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28475): Terminated: ok {rc=0} 04:46:52.960266 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28473): Process ended prematurely: osmo-stp_10.42.42.5(pid=28473) [trial-2369↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28473)]