Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22323): Process ended prematurely: osmo-stp_10.42.42.5(pid=22323) [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22323)]
Standard Output
---------------------------------------------- trial-2369 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:42:22.736846 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:22.748180 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:42:22.900653 tst cs_paging_gprs_active.py: using LAC 25743 03:42:23.022984 tst cs_paging_gprs_active.py: using RAC 243 03:42:23.144762 tst cs_paging_gprs_active.py: using CellId 25743 03:42:23.263399 tst cs_paging_gprs_active.py: using BVCI 25744 03:42:23.286146 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.297085 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.307818 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.319279 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.330622 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.342142 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.353602 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.364665 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:42:23.376016 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:42:23.494050 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:42:23.768511 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:42:23.892118 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:42:24.198200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22313): Launched 03:42:24.450564 run iperf3-srv_10.42.42.10(pid=22314): Launched 03:42:24.630741 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:42:24.754096 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:42:25.059347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22315): Launched 03:42:25.312319 run iperf3-srv_10.42.42.10(pid=22316): Launched 03:42:25.491772 tst cs_paging_gprs_active.py:38: start network... 03:42:25.615038 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:42:26.077376 run create_hlr_db(pid=22317): Launched 03:42:26.247298 bus /gobi_6: Setting Powered False 03:42:27.269126 run create_hlr_db(pid=22317): Terminated: ok {rc=0} 03:42:27.687651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22319): Launched 03:42:28.005494 run osmo-hlr_10.42.42.2(pid=22320): Launched 03:42:28.124786 run osmo-stp_10.42.42.5: Starting osmo-stp 03:42:28.671248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22322): Launched 03:42:28.986137 run osmo-stp_10.42.42.5(pid=22323): Launched 03:42:29.100548 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:42:29.648901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22325): Launched 03:42:29.761142 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:42:30.035045 run patchelf(pid=22326): Launched 03:42:30.219254 run osmo-stp_10.42.42.5(pid=22323): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22323)] 03:42:30.354670 run osmo-stp_10.42.42.5(pid=22323): stdout: | (launched: 2022-12-10_03:42:28.832121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:42:30.489861 run osmo-stp_10.42.42.5(pid=22323): stderr: | �[0;m�[38;5;43m20221210034229024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034229025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034229025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034229025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:42:30.620125 run osmo-stp_10.42.42.5(pid=22323): stdout: | (launched: 2022-12-10_03:42:28.832121) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:42:30.749614 run osmo-stp_10.42.42.5(pid=22323): stderr: | �[0;m�[38;5;43m20221210034229024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034229025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034229025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034229025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034229026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:42:30.905101 run patchelf(pid=22326): Terminating (SIGINT) 03:42:31.104484 run patchelf(pid=22326): Terminated: ok {rc=0} 03:42:31.138149 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22323): Process ended prematurely: osmo-stp_10.42.42.5(pid=22323) [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22323)] [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:42:31.148766 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 03:42:31.211788 run osmo-hlr_10.42.42.2(pid=22320): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22320)] 03:42:31.263059 run osmo-hlr_10.42.42.2(pid=22320): stdout: | (launched: 2022-12-10_03:42:27.848689) 03:42:31.327639 run osmo-hlr_10.42.42.2(pid=22320): stderr: | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210034228046 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210034228059 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210034228067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210034228067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210034228067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:42:31.382529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22313): Terminating (SIGTERM) 03:42:31.435541 run iperf3-srv_10.42.42.10(pid=22314): Terminating (SIGTERM) 03:42:31.483463 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22315): Terminating (SIGTERM) 03:42:31.534588 run iperf3-srv_10.42.42.10(pid=22316): Terminating (SIGTERM) 03:42:31.581846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22319): Terminating (SIGTERM) 03:42:31.624094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22322): Terminating (SIGTERM) 03:42:31.666576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22325): Terminating (SIGTERM) 03:42:31.676388 --- ParallelTerminationStrategy: PID 22313 died... 03:42:31.733023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22313): Terminated: ok {rc=0} 03:42:31.743628 --- ParallelTerminationStrategy: PID 22314 died... 03:42:31.799970 run iperf3-srv_10.42.42.10(pid=22314): Terminated {rc=256} 03:42:31.810581 --- ParallelTerminationStrategy: PID 22315 died... 03:42:31.867291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22315): Terminated: ok {rc=0} 03:42:31.877912 --- ParallelTerminationStrategy: PID 22316 died... 03:42:31.933043 run iperf3-srv_10.42.42.10(pid=22316): Terminated {rc=256} 03:42:31.943674 --- ParallelTerminationStrategy: PID 22319 died... 03:42:31.998740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22319): Terminated: ok {rc=0} 03:42:32.008886 --- ParallelTerminationStrategy: PID 22322 died... 03:42:32.064173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22322): Terminated: ok {rc=0} 03:42:32.074455 --- ParallelTerminationStrategy: PID 22325 died... 03:42:32.129375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22325): Terminated: ok {rc=0} 03:42:32.215553 bus /gobi_0: Setting Powered False 03:42:33.317929 bus /gobi_0: Setting Powered False 03:42:34.427495 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22323): Process ended prematurely: osmo-stp_10.42.42.5(pid=22323) [trial-2369↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22323)]