Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22251): Process ended prematurely: osmo-stp_10.42.42.5(pid=22251) [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22251)]
Standard Output
---------------------------------------------- trial-2369 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 03:41:24.205202 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.216082 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:41:24.335646 tst cs_paging_gprs_active.py: using LAC 25738 03:41:24.456364 tst cs_paging_gprs_active.py: using RAC 238 03:41:24.578447 tst cs_paging_gprs_active.py: using CellId 25738 03:41:24.703439 tst cs_paging_gprs_active.py: using BVCI 25739 03:41:24.727616 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.738810 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.749793 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.761379 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.772725 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.784014 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.795563 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.807383 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:24.818995 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:41:24.934960 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:41:25.207303 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:41:25.330406 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:41:25.636656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22241): Launched 03:41:25.891041 run iperf3-srv_10.42.42.10(pid=22242): Launched 03:41:26.071152 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:41:26.193993 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:41:26.499468 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22243): Launched 03:41:26.753413 run iperf3-srv_10.42.42.10(pid=22244): Launched 03:41:26.933780 tst cs_paging_gprs_active.py:38: start network... 03:41:27.056424 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:41:27.521253 run create_hlr_db(pid=22245): Launched 03:41:27.691024 bus /gobi_6: Setting Powered False 03:41:28.712418 run create_hlr_db(pid=22245): Terminated: ok {rc=0} 03:41:29.130483 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22247): Launched 03:41:29.445563 run osmo-hlr_10.42.42.2(pid=22248): Launched 03:41:29.561322 run osmo-stp_10.42.42.5: Starting osmo-stp 03:41:30.109798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22250): Launched 03:41:30.425373 run osmo-stp_10.42.42.5(pid=22251): Launched 03:41:30.539509 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:41:31.131376 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22253): Launched 03:41:31.246223 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:41:31.545821 run patchelf(pid=22254): Launched 03:41:31.735289 run osmo-stp_10.42.42.5(pid=22251): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22251)] 03:41:31.874057 run osmo-stp_10.42.42.5(pid=22251): stdout: | (launched: 2022-12-10_03:41:30.270389) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:41:32.013277 run osmo-stp_10.42.42.5(pid=22251): stderr: | �[0;m�[38;5;43m20221210034130462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034130462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034130463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034130463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034130463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034130464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034130464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:41:32.146280 run osmo-stp_10.42.42.5(pid=22251): stdout: | (launched: 2022-12-10_03:41:30.270389) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:41:32.276245 run osmo-stp_10.42.42.5(pid=22251): stderr: | �[0;m�[38;5;43m20221210034130462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210034130462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210034130463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210034130463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210034130463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210034130464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210034130464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:41:32.427576 run patchelf(pid=22254): Terminating (SIGINT) 03:41:32.605025 run patchelf(pid=22254): Terminated: ok {rc=0} 03:41:32.637883 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22251): Process ended prematurely: osmo-stp_10.42.42.5(pid=22251) [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22251)] [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 03:41:32.648154 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 03:41:32.710462 run osmo-hlr_10.42.42.2(pid=22248): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22248)] 03:41:32.761268 run osmo-hlr_10.42.42.2(pid=22248): stdout: | (launched: 2022-12-10_03:41:29.290934) 03:41:32.813138 run osmo-hlr_10.42.42.2(pid=22248): stderr: | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210034129489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210034129527 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210034129536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210034129536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210034129537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:41:32.857286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22241): Terminating (SIGTERM) 03:41:32.898685 run iperf3-srv_10.42.42.10(pid=22242): Terminating (SIGTERM) 03:41:32.940082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22243): Terminating (SIGTERM) 03:41:32.981600 run iperf3-srv_10.42.42.10(pid=22244): Terminating (SIGTERM) 03:41:33.023109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22247): Terminating (SIGTERM) 03:41:33.064614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22250): Terminating (SIGTERM) 03:41:33.106241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22253): Terminating (SIGTERM) 03:41:33.115792 --- ParallelTerminationStrategy: PID 22241 died... 03:41:33.171411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22241): Terminated: ok {rc=0} 03:41:33.181537 --- ParallelTerminationStrategy: PID 22242 died... 03:41:33.236901 run iperf3-srv_10.42.42.10(pid=22242): Terminated {rc=256} 03:41:33.246967 --- ParallelTerminationStrategy: PID 22243 died... 03:41:33.302070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22243): Terminated: ok {rc=0} 03:41:33.312044 --- ParallelTerminationStrategy: PID 22244 died... 03:41:33.366925 run iperf3-srv_10.42.42.10(pid=22244): Terminated {rc=256} 03:41:33.376838 --- ParallelTerminationStrategy: PID 22247 died... 03:41:33.432167 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22247): Terminated: ok {rc=0} 03:41:33.442197 --- ParallelTerminationStrategy: PID 22250 died... 03:41:33.497681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22250): Terminated: ok {rc=0} 03:41:33.507722 --- ParallelTerminationStrategy: PID 22253 died... 03:41:33.562794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22253): Terminated: ok {rc=0} 03:41:33.649182 bus /gobi_0: Setting Powered False 03:41:34.750700 bus /gobi_0: Setting Powered False 03:41:35.859048 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22251): Process ended prematurely: osmo-stp_10.42.42.5(pid=22251) [trial-2369↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22251)]