Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=23805): Process ended prematurely: osmo-stp_10.42.42.5(pid=23805) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23805)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:59:39.243196 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.254248 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:59:39.412767 tst cs_paging_gprs_active.py: using LAC 25836 03:59:39.533292 tst cs_paging_gprs_active.py: using RAC 81 03:59:39.653210 tst cs_paging_gprs_active.py: using CellId 25836 03:59:39.774433 tst cs_paging_gprs_active.py: using BVCI 25837 03:59:39.797820 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.808740 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.819647 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.830947 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.842184 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.854124 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.865106 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.876220 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:59:39.887381 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:59:40.006495 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:59:40.300641 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:59:40.437019 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:40.771562 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23795): Launched 03:59:41.050810 run iperf3-srv_10.42.42.10(pid=23796): Launched 03:59:41.250459 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:59:41.385974 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:41.719921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23797): Launched 03:59:41.998273 run iperf3-srv_10.42.42.10(pid=23798): Launched 03:59:42.198559 tst cs_paging_gprs_active.py:38: start network... 03:59:42.334337 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:59:42.853029 run create_hlr_db(pid=23799): Launched 03:59:43.041170 bus /gobi_6: Setting Powered False 03:59:44.060406 run create_hlr_db(pid=23799): Terminated: ok {rc=0} 03:59:44.469334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23801): Launched 03:59:44.774146 run osmo-hlr_10.42.42.2(pid=23802): Launched 03:59:44.893568 run osmo-stp_10.42.42.5: Starting osmo-stp 03:59:45.429409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23804): Launched 03:59:45.734920 run osmo-stp_10.42.42.5(pid=23805): Launched 03:59:45.878504 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:59:46.449361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23807): Launched 03:59:46.560376 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:59:46.887784 run patchelf(pid=23808): Launched 03:59:47.123374 run osmo-stp_10.42.42.5(pid=23805): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23805)] 03:59:47.263983 run osmo-stp_10.42.42.5(pid=23805): stdout: | (launched: 2022-12-10_03:59:45.583913) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:47.396120 run osmo-stp_10.42.42.5(pid=23805): stderr: | �[0;m�[38;5;43m20221210035945756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035945756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035945757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035945757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:47.523214 run osmo-stp_10.42.42.5(pid=23805): stdout: | (launched: 2022-12-10_03:59:45.583913) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:47.648651 run osmo-stp_10.42.42.5(pid=23805): stderr: | �[0;m�[38;5;43m20221210035945756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035945756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035945757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035945757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035945758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:47.795366 run patchelf(pid=23808): Terminating (SIGINT) 03:59:47.967662 run patchelf(pid=23808): Terminated: ok {rc=0} 03:59:47.999495 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23805): Process ended prematurely: osmo-stp_10.42.42.5(pid=23805) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23805)] [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:59:48.009167 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:59:48.071310 run osmo-hlr_10.42.42.2(pid=23802): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23802)] 03:59:48.121083 run osmo-hlr_10.42.42.2(pid=23802): stdout: | (launched: 2022-12-10_03:59:44.624118) 03:59:48.171785 run osmo-hlr_10.42.42.2(pid=23802): stderr: | �[0;m�[1;31m20221210035944801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035944802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035944802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035944802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035944802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035944802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035944814 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035944822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035944822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035944822 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:59:48.214231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23795): Terminating (SIGTERM) 03:59:48.254791 run iperf3-srv_10.42.42.10(pid=23796): Terminating (SIGTERM) 03:59:48.295870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23797): Terminating (SIGTERM) 03:59:48.336365 run iperf3-srv_10.42.42.10(pid=23798): Terminating (SIGTERM) 03:59:48.377148 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23801): Terminating (SIGTERM) 03:59:48.417921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23804): Terminating (SIGTERM) 03:59:48.458492 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23807): Terminating (SIGTERM) 03:59:48.468368 --- ParallelTerminationStrategy: PID 23795 died... 03:59:48.522297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23795): Terminated: ok {rc=0} 03:59:48.531793 --- ParallelTerminationStrategy: PID 23796 died... 03:59:48.584758 run iperf3-srv_10.42.42.10(pid=23796): Terminated {rc=256} 03:59:48.594576 --- ParallelTerminationStrategy: PID 23797 died... 03:59:48.647459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23797): Terminated: ok {rc=0} 03:59:48.657301 --- ParallelTerminationStrategy: PID 23798 died... 03:59:48.710399 run iperf3-srv_10.42.42.10(pid=23798): Terminated {rc=256} 03:59:48.719968 --- ParallelTerminationStrategy: PID 23801 died... 03:59:48.772999 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23801): Terminated: ok {rc=0} 03:59:48.782815 --- ParallelTerminationStrategy: PID 23804 died... 03:59:48.836040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23804): Terminated: ok {rc=0} 03:59:48.845739 --- ParallelTerminationStrategy: PID 23807 died... 03:59:48.899228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23807): Terminated: ok {rc=0} 03:59:48.987991 bus /gobi_0: Setting Powered False 03:59:50.091040 bus /gobi_0: Setting Powered False 03:59:51.201548 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23805): Process ended prematurely: osmo-stp_10.42.42.5(pid=23805) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23805)]