Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6385): Process ended prematurely: osmo-stp_10.42.42.5(pid=6385) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6385)]
Standard Output
---------------------------------------------- trial-2370 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 06:40:10.047391 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.059829 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:40:10.203009 tst iperf3m4.py: using LAC 26550 06:40:10.325875 tst iperf3m4.py: using RAC 30 06:40:10.454247 tst iperf3m4.py: using CellId 26550 06:40:10.575235 tst iperf3m4.py: using BVCI 26551 06:40:10.599281 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.611027 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.622684 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.634263 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.645812 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.657279 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.668910 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.680317 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:40:10.692076 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:10.810927 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:10.926614 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:11.045389 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:40:11.331927 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 06:40:11.464210 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:11.790258 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6324): Launched 06:40:12.060224 run iperf3-srv_10.42.42.10(pid=6325): Launched 06:40:12.251988 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 06:40:12.382604 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:12.707530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6326): Launched 06:40:12.976594 run iperf3-srv_10.42.42.10(pid=6327): Launched 06:40:13.167927 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 06:40:13.298254 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:13.624676 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6328): Launched 06:40:13.894227 run iperf3-srv_10.42.42.10(pid=6329): Launched 06:40:14.085266 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 06:40:14.215986 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:14.542309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6330): Launched 06:40:14.811661 run iperf3-srv_10.42.42.10(pid=6331): Launched 06:40:15.002907 tst iperf3m4.py:8: start network... 06:40:15.133123 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:40:15.636195 run create_hlr_db(pid=6332): Launched 06:40:15.817328 bus /gobi_6: Setting Powered False 06:40:16.897502 run create_hlr_db(pid=6332): Terminated: ok {rc=0} 06:40:17.413843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6353): Launched 06:40:17.746702 run osmo-hlr_10.42.42.2(pid=6354): Launched 06:40:17.947344 run osmo-stp_10.42.42.5: Starting osmo-stp 06:40:18.529243 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6364): Launched 06:40:18.873531 run osmo-stp_10.42.42.5(pid=6385): Launched 06:40:18.987132 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:40:19.536021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6388): Launched 06:40:19.647788 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:40:19.921861 run patchelf(pid=6389): Launched 06:40:20.105907 run osmo-stp_10.42.42.5(pid=6385): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6385)] 06:40:20.239871 run osmo-stp_10.42.42.5(pid=6385): stdout: | (launched: 2022-12-10_06:40:18.692148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:20.374644 run osmo-stp_10.42.42.5(pid=6385): stderr: | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210064018901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210064018901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210064018901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210064018902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:20.504861 run osmo-stp_10.42.42.5(pid=6385): stdout: | (launched: 2022-12-10_06:40:18.692148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:20.633909 run osmo-stp_10.42.42.5(pid=6385): stderr: | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210064018900 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210064018901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210064018901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210064018901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210064018902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:20.783367 run patchelf(pid=6389): Terminating (SIGINT) 06:40:20.958569 run patchelf(pid=6389): Terminated: ok {rc=0} 06:40:20.991167 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6385): Process ended prematurely: osmo-stp_10.42.42.5(pid=6385) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6385)] [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 06:40:21.001107 tst iperf3m4.py:8: Test FAILED (11.0 sec) 06:40:21.062290 run osmo-hlr_10.42.42.2(pid=6354): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6354)] 06:40:21.112052 run osmo-hlr_10.42.42.2(pid=6354): stdout: | (launched: 2022-12-10_06:40:17.571120) 06:40:21.162552 run osmo-hlr_10.42.42.2(pid=6354): stderr: | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210064017906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210064017928 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210064017939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210064017939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210064017940 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:40:21.205646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6324): Terminating (SIGTERM) 06:40:21.246182 run iperf3-srv_10.42.42.10(pid=6325): Terminating (SIGTERM) 06:40:21.286826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6326): Terminating (SIGTERM) 06:40:21.327371 run iperf3-srv_10.42.42.10(pid=6327): Terminating (SIGTERM) 06:40:21.367855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6328): Terminating (SIGTERM) 06:40:21.408350 run iperf3-srv_10.42.42.10(pid=6329): Terminating (SIGTERM) 06:40:21.449619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6330): Terminating (SIGTERM) 06:40:21.490155 run iperf3-srv_10.42.42.10(pid=6331): Terminating (SIGTERM) 06:40:21.530727 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6353): Terminating (SIGTERM) 06:40:21.571202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6364): Terminating (SIGTERM) 06:40:21.611725 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6388): Terminating (SIGTERM) 06:40:21.621261 --- ParallelTerminationStrategy: PID 6324 died... 06:40:21.675565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6324): Terminated: ok {rc=0} 06:40:21.685530 --- ParallelTerminationStrategy: PID 6325 died... 06:40:21.739523 run iperf3-srv_10.42.42.10(pid=6325): Terminated {rc=256} 06:40:21.749415 --- ParallelTerminationStrategy: PID 6326 died... 06:40:21.803534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6326): Terminated: ok {rc=0} 06:40:21.813420 --- ParallelTerminationStrategy: PID 6327 died... 06:40:21.867362 run iperf3-srv_10.42.42.10(pid=6327): Terminated {rc=256} 06:40:21.877111 --- ParallelTerminationStrategy: PID 6328 died... 06:40:21.931674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6328): Terminated: ok {rc=0} 06:40:21.941716 --- ParallelTerminationStrategy: PID 6329 died... 06:40:21.995779 run iperf3-srv_10.42.42.10(pid=6329): Terminated {rc=256} 06:40:22.005632 --- ParallelTerminationStrategy: PID 6330 died... 06:40:22.059695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6330): Terminated: ok {rc=0} 06:40:22.069632 --- ParallelTerminationStrategy: PID 6331 died... 06:40:22.123614 run iperf3-srv_10.42.42.10(pid=6331): Terminated {rc=256} 06:40:22.133535 --- ParallelTerminationStrategy: PID 6353 died... 06:40:22.187800 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6353): Terminated: ok {rc=0} 06:40:22.197967 --- ParallelTerminationStrategy: PID 6364 died... 06:40:22.252185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6364): Terminated: ok {rc=0} 06:40:22.262154 --- ParallelTerminationStrategy: PID 6388 died... 06:40:22.316368 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6388): Terminated: ok {rc=0} 06:40:22.400718 bus /gobi_4: Setting Powered False 06:40:23.506523 bus /gobi_4: Setting Powered False 06:40:24.611680 bus /gobi_1: Setting Powered False 06:40:25.715745 bus /gobi_1: Setting Powered False 06:40:26.821937 bus /gobi_0: Setting Powered False 06:40:27.927035 bus /gobi_0: Setting Powered False 06:40:29.033702 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6385): Process ended prematurely: osmo-stp_10.42.42.5(pid=6385) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6385)]