Failed
gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14104): Process ended prematurely: osmo-stp_10.42.42.5(pid=14104) [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py ---------------------------------------------- 07:58:19.566695 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:19.578451 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:58:19.710960 tst iperf3.py: using LAC 26967 07:58:19.825805 tst iperf3.py: using RAC 192 07:58:19.948605 tst iperf3.py: using CellId 26967 07:58:20.068377 tst iperf3.py: using BVCI 26968 07:58:20.090838 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.102121 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.113070 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.124711 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.136253 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.147925 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.159769 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.171252 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:58:20.182861 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:58:20.471974 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:58:20.602949 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:58:20.927810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Launched 07:58:21.197920 run iperf3-srv_10.42.42.10(pid=14097): Launched 07:58:21.389398 tst iperf3.py:8: start network... 07:58:21.519982 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:58:22.022517 run create_hlr_db(pid=14098): Launched 07:58:22.204228 bus /gobi_6: Setting Powered False 07:58:23.225259 run create_hlr_db(pid=14098): Terminated: ok {rc=0} 07:58:23.619537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Launched 07:58:23.913605 run osmo-hlr_10.42.42.2(pid=14101): Launched 07:58:24.029107 run osmo-stp_10.42.42.5: Starting osmo-stp 07:58:24.545624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Launched 07:58:24.839347 run osmo-stp_10.42.42.5(pid=14104): Launched 07:58:24.946826 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:58:25.455598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Launched 07:58:25.559968 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:58:25.815184 run patchelf(pid=14107): Launched 07:58:25.986841 run osmo-stp_10.42.42.5(pid=14104): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)] 07:58:26.113133 run osmo-stp_10.42.42.5(pid=14104): stdout: | (launched: 2022-12-10_07:58:24.694770) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:58:26.238872 run osmo-stp_10.42.42.5(pid=14104): stderr: | �[0;m�[38;5;43m20221210075824863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075824864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075824864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075824864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:58:26.360483 run osmo-stp_10.42.42.5(pid=14104): stdout: | (launched: 2022-12-10_07:58:24.694770) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:58:26.480198 run osmo-stp_10.42.42.5(pid=14104): stderr: | �[0;m�[38;5;43m20221210075824863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075824864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075824864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075824864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075824865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:58:26.625423 run patchelf(pid=14107): Terminating (SIGINT) 07:58:26.803088 run patchelf(pid=14107): Terminated: ok {rc=0} 07:58:26.835803 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14104): Process ended prematurely: osmo-stp_10.42.42.5(pid=14104) [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)] [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8] 07:58:26.845601 tst iperf3.py:8: Test FAILED (7.3 sec) 07:58:26.908504 run osmo-hlr_10.42.42.2(pid=14101): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14101)] 07:58:26.960006 run osmo-hlr_10.42.42.2(pid=14101): stdout: | (launched: 2022-12-10_07:58:23.768718) 07:58:27.012289 run osmo-hlr_10.42.42.2(pid=14101): stderr: | �[0;m�[1;31m20221210075823941 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210075823941 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210075823941 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210075823941 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210075823942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210075823942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210075823954 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210075823962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210075823962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210075823962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:58:27.056704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Terminating (SIGTERM) 07:58:27.098520 run iperf3-srv_10.42.42.10(pid=14097): Terminating (SIGTERM) 07:58:27.139904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Terminating (SIGTERM) 07:58:27.181215 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Terminating (SIGTERM) 07:58:27.222918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Terminating (SIGTERM) 07:58:27.232646 --- ParallelTerminationStrategy: PID 14096 died... 07:58:27.288833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Terminated: ok {rc=0} 07:58:27.299017 --- ParallelTerminationStrategy: PID 14097 died... 07:58:27.354286 run iperf3-srv_10.42.42.10(pid=14097): Terminated {rc=256} 07:58:27.364303 --- ParallelTerminationStrategy: PID 14100 died... 07:58:27.419676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Terminated: ok {rc=0} 07:58:27.429659 --- ParallelTerminationStrategy: PID 14103 died... 07:58:27.484453 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Terminated: ok {rc=0} 07:58:27.494419 --- ParallelTerminationStrategy: PID 14106 died... 07:58:27.549278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Terminated: ok {rc=0} 07:58:27.636221 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14104): Process ended prematurely: osmo-stp_10.42.42.5(pid=14104) [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)]