Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14674): Process ended prematurely: osmo-stp_10.42.42.5(pid=14674) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14674)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 08:06:21.136047 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.148303 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:06:21.290426 tst iperf3.py: using LAC 27010 08:06:21.413092 tst iperf3.py: using RAC 235 08:06:21.537100 tst iperf3.py: using CellId 27010 08:06:21.658762 tst iperf3.py: using BVCI 27011 08:06:21.682769 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.694409 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.705961 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.717602 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.729076 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.740487 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.752045 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.763454 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:21.775389 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:22.082755 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:06:22.212496 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:22.534710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14666): Launched 08:06:22.801669 run iperf3-srv_10.42.42.10(pid=14667): Launched 08:06:22.991857 tst iperf3.py:8: start network... 08:06:23.121883 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:06:23.620211 run create_hlr_db(pid=14668): Launched 08:06:23.801219 bus /gobi_6: Setting Powered False 08:06:24.823252 run create_hlr_db(pid=14668): Terminated: ok {rc=0} 08:06:25.217700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14670): Launched 08:06:25.510120 run osmo-hlr_10.42.42.2(pid=14671): Launched 08:06:25.619354 run osmo-stp_10.42.42.5: Starting osmo-stp 08:06:26.125950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14673): Launched 08:06:26.418125 run osmo-stp_10.42.42.5(pid=14674): Launched 08:06:26.524138 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:06:27.032882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14676): Launched 08:06:27.136852 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:06:27.391622 run patchelf(pid=14677): Launched 08:06:27.564657 run osmo-stp_10.42.42.5(pid=14674): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14674)] 08:06:27.690886 run osmo-stp_10.42.42.5(pid=14674): stdout: | (launched: 2022-12-10_08:06:26.274091) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:27.817957 run osmo-stp_10.42.42.5(pid=14674): stderr: | �[0;m�[38;5;43m20221210080626443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080626443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080626444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080626444 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:27.939861 run osmo-stp_10.42.42.5(pid=14674): stdout: | (launched: 2022-12-10_08:06:26.274091) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:28.060859 run osmo-stp_10.42.42.5(pid=14674): stderr: | �[0;m�[38;5;43m20221210080626443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080626443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080626444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080626444 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080626445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:28.201966 run patchelf(pid=14677): Terminating (SIGINT) 08:06:28.367963 run patchelf(pid=14677): Terminated: ok {rc=0} 08:06:28.398535 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14674): Process ended prematurely: osmo-stp_10.42.42.5(pid=14674) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14674)] [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 08:06:28.407469 tst iperf3.py:8: Test FAILED (7.3 sec) 08:06:28.467335 run osmo-hlr_10.42.42.2(pid=14671): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14671)] 08:06:28.516159 run osmo-hlr_10.42.42.2(pid=14671): stdout: | (launched: 2022-12-10_08:06:25.365721) 08:06:28.565735 run osmo-hlr_10.42.42.2(pid=14671): stderr: | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210080625541 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210080625554 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210080625563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210080625563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210080625563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:06:28.607356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14666): Terminating (SIGTERM) 08:06:28.646964 run iperf3-srv_10.42.42.10(pid=14667): Terminating (SIGTERM) 08:06:28.687158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14670): Terminating (SIGTERM) 08:06:28.726898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14673): Terminating (SIGTERM) 08:06:28.766198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14676): Terminating (SIGTERM) 08:06:28.775467 --- ParallelTerminationStrategy: PID 14666 died... 08:06:28.828386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14666): Terminated: ok {rc=0} 08:06:28.837913 --- ParallelTerminationStrategy: PID 14667 died... 08:06:28.890522 run iperf3-srv_10.42.42.10(pid=14667): Terminated {rc=256} 08:06:28.899864 --- ParallelTerminationStrategy: PID 14670 died... 08:06:28.952769 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14670): Terminated: ok {rc=0} 08:06:28.962263 --- ParallelTerminationStrategy: PID 14673 died... 08:06:29.015181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14673): Terminated: ok {rc=0} 08:06:29.024991 --- ParallelTerminationStrategy: PID 14676 died... 08:06:29.077753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14676): Terminated: ok {rc=0} 08:06:29.166159 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14674): Process ended prematurely: osmo-stp_10.42.42.5(pid=14674) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14674)]