Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14692): Process ended prematurely: osmo-stp_10.42.42.5(pid=14692) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14692)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 08:06:30.273632 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.285435 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:06:30.427995 tst iperf3m4.py: using LAC 27011 08:06:30.551045 tst iperf3m4.py: using RAC 236 08:06:30.673696 tst iperf3m4.py: using CellId 27011 08:06:30.796267 tst iperf3m4.py: using BVCI 27012 08:06:30.820506 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.835870 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.862179 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.874932 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.887149 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.899196 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.911412 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.924329 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:06:30.938638 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:31.076099 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:31.195989 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:31.310997 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:06:31.597677 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 08:06:31.724693 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:32.055847 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14678): Launched 08:06:32.310736 run iperf3-srv_10.42.42.10(pid=14679): Launched 08:06:32.489371 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 08:06:32.611354 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:32.914129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14680): Launched 08:06:33.164839 run iperf3-srv_10.42.42.10(pid=14681): Launched 08:06:33.342888 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 08:06:33.464650 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:33.768072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14682): Launched 08:06:34.019107 run iperf3-srv_10.42.42.10(pid=14683): Launched 08:06:34.196818 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 08:06:34.318246 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:06:34.622103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14684): Launched 08:06:34.873249 run iperf3-srv_10.42.42.10(pid=14685): Launched 08:06:35.051134 tst iperf3m4.py:8: start network... 08:06:35.172493 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:06:35.632774 run create_hlr_db(pid=14686): Launched 08:06:35.800270 bus /gobi_6: Setting Powered False 08:06:36.821963 run create_hlr_db(pid=14686): Terminated: ok {rc=0} 08:06:37.239143 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14688): Launched 08:06:37.553303 run osmo-hlr_10.42.42.2(pid=14689): Launched 08:06:37.672521 run osmo-stp_10.42.42.5: Starting osmo-stp 08:06:38.216734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14691): Launched 08:06:38.530838 run osmo-stp_10.42.42.5(pid=14692): Launched 08:06:38.643514 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:06:39.190571 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14694): Launched 08:06:39.302718 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:06:39.576120 run patchelf(pid=14695): Launched 08:06:39.759487 run osmo-stp_10.42.42.5(pid=14692): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14692)] 08:06:39.893711 run osmo-stp_10.42.42.5(pid=14692): stdout: | (launched: 2022-12-10_08:06:38.376137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:40.029126 run osmo-stp_10.42.42.5(pid=14692): stderr: | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080638569 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:40.159345 run osmo-stp_10.42.42.5(pid=14692): stdout: | (launched: 2022-12-10_08:06:38.376137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:40.287814 run osmo-stp_10.42.42.5(pid=14692): stderr: | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080638568 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080638569 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080638569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:40.438229 run patchelf(pid=14695): Terminating (SIGINT) 08:06:40.614984 run patchelf(pid=14695): Terminated: ok {rc=0} 08:06:40.647814 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14692): Process ended prematurely: osmo-stp_10.42.42.5(pid=14692) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14692)] [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 08:06:40.657726 tst iperf3m4.py:8: Test FAILED (10.4 sec) 08:06:40.720390 run osmo-hlr_10.42.42.2(pid=14689): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14689)] 08:06:40.771423 run osmo-hlr_10.42.42.2(pid=14689): stdout: | (launched: 2022-12-10_08:06:37.398722) 08:06:40.822749 run osmo-hlr_10.42.42.2(pid=14689): stderr: | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210080637595 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210080637608 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210080637616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210080637616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210080637616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:06:40.866693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14678): Terminating (SIGTERM) 08:06:40.908198 run iperf3-srv_10.42.42.10(pid=14679): Terminating (SIGTERM) 08:06:40.950380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14680): Terminating (SIGTERM) 08:06:40.991987 run iperf3-srv_10.42.42.10(pid=14681): Terminating (SIGTERM) 08:06:41.033792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14682): Terminating (SIGTERM) 08:06:41.075502 run iperf3-srv_10.42.42.10(pid=14683): Terminating (SIGTERM) 08:06:41.117138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14684): Terminating (SIGTERM) 08:06:41.158430 run iperf3-srv_10.42.42.10(pid=14685): Terminating (SIGTERM) 08:06:41.199903 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14688): Terminating (SIGTERM) 08:06:41.241332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14691): Terminating (SIGTERM) 08:06:41.282953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14694): Terminating (SIGTERM) 08:06:41.292515 --- ParallelTerminationStrategy: PID 14678 died... 08:06:41.347946 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14678): Terminated: ok {rc=0} 08:06:41.358181 --- ParallelTerminationStrategy: PID 14679 died... 08:06:41.413169 run iperf3-srv_10.42.42.10(pid=14679): Terminated {rc=256} 08:06:41.423089 --- ParallelTerminationStrategy: PID 14680 died... 08:06:41.478151 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14680): Terminated: ok {rc=0} 08:06:41.488131 --- ParallelTerminationStrategy: PID 14681 died... 08:06:41.543313 run iperf3-srv_10.42.42.10(pid=14681): Terminated {rc=256} 08:06:41.553183 --- ParallelTerminationStrategy: PID 14682 died... 08:06:41.608083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14682): Terminated: ok {rc=0} 08:06:41.618107 --- ParallelTerminationStrategy: PID 14683 died... 08:06:41.672997 run iperf3-srv_10.42.42.10(pid=14683): Terminated {rc=256} 08:06:41.682835 --- ParallelTerminationStrategy: PID 14684 died... 08:06:41.737861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14684): Terminated: ok {rc=0} 08:06:41.747748 --- ParallelTerminationStrategy: PID 14685 died... 08:06:41.802561 run iperf3-srv_10.42.42.10(pid=14685): Terminated {rc=256} 08:06:41.812559 --- ParallelTerminationStrategy: PID 14688 died... 08:06:41.867699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14688): Terminated: ok {rc=0} 08:06:41.877814 --- ParallelTerminationStrategy: PID 14691 died... 08:06:41.932716 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14691): Terminated: ok {rc=0} 08:06:41.942788 --- ParallelTerminationStrategy: PID 14694 died... 08:06:41.997751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14694): Terminated: ok {rc=0} 08:06:42.084909 bus /gobi_4: Setting Powered False 08:06:43.191371 bus /gobi_4: Setting Powered False 08:06:44.302954 bus /gobi_1: Setting Powered False 08:06:45.405728 bus /gobi_1: Setting Powered False 08:06:46.513944 bus /gobi_0: Setting Powered False 08:06:47.614206 bus /gobi_0: Setting Powered False 08:06:48.725249 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14692): Process ended prematurely: osmo-stp_10.42.42.5(pid=14692) [trial-2371↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14692)]