Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9436): Process ended prematurely: osmo-stp_10.42.42.5(pid=9436) [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9436)]
Standard Output
---------------------------------------------- trial-2371 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 07:11:56.228060 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.240511 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:11:56.388479 tst ping_idle_ping.py: using LAC 26716 07:11:56.510069 tst ping_idle_ping.py: using RAC 196 07:11:56.632374 tst ping_idle_ping.py: using CellId 26716 07:11:56.753452 tst ping_idle_ping.py: using BVCI 26717 07:11:56.777061 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.788205 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.799353 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.810535 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.821549 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.832486 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.843763 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:11:56.854834 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:11:57.123873 tst ping_idle_ping.py:24: start network... 07:11:57.244908 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:11:57.723767 run create_hlr_db(pid=9430): Launched 07:11:57.903461 bus /gobi_6: Setting Powered False 07:11:58.924474 run create_hlr_db(pid=9430): Terminated: ok {rc=0} 07:11:59.336146 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9432): Launched 07:11:59.646608 run osmo-hlr_10.42.42.2(pid=9433): Launched 07:11:59.760704 run osmo-stp_10.42.42.5: Starting osmo-stp 07:12:00.296238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9435): Launched 07:12:00.606900 run osmo-stp_10.42.42.5(pid=9436): Launched 07:12:00.718932 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:12:01.309470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9438): Launched 07:12:01.417464 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:12:01.699567 run patchelf(pid=9439): Launched 07:12:01.878941 run osmo-stp_10.42.42.5(pid=9436): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9436)] 07:12:02.009059 run osmo-stp_10.42.42.5(pid=9436): stdout: | (launched: 2022-12-10_07:12:00.454049) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:02.139282 run osmo-stp_10.42.42.5(pid=9436): stderr: | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071200645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:02.261390 run osmo-stp_10.42.42.5(pid=9436): stdout: | (launched: 2022-12-10_07:12:00.454049) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:02.380766 run osmo-stp_10.42.42.5(pid=9436): stderr: | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071200644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071200645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071200645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:02.520741 run patchelf(pid=9439): Terminating (SIGINT) 07:12:02.685415 run patchelf(pid=9439): Terminated: ok {rc=0} 07:12:02.715478 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9436): Process ended prematurely: osmo-stp_10.42.42.5(pid=9436) [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9436)] [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 07:12:02.724292 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 07:12:02.785013 run osmo-hlr_10.42.42.2(pid=9433): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9433)] 07:12:02.834359 run osmo-hlr_10.42.42.2(pid=9433): stdout: | (launched: 2022-12-10_07:11:59.494387) 07:12:02.884106 run osmo-hlr_10.42.42.2(pid=9433): stderr: | �[0;m�[1;31m20221210071159689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071159689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071159689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071159689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071159690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071159690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071159701 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071159709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071159709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071159709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:12:02.926551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9432): Terminating (SIGTERM) 07:12:02.966472 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9435): Terminating (SIGTERM) 07:12:03.006619 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9438): Terminating (SIGTERM) 07:12:03.016035 --- ParallelTerminationStrategy: PID 9432 died... 07:12:03.070045 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9432): Terminated: ok {rc=0} 07:12:03.079688 --- ParallelTerminationStrategy: PID 9435 died... 07:12:03.132800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9435): Terminated: ok {rc=0} 07:12:03.142664 --- ParallelTerminationStrategy: PID 9438 died... 07:12:03.195904 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9438): Terminated: ok {rc=0} 07:12:03.285244 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9436): Process ended prematurely: osmo-stp_10.42.42.5(pid=9436) [trial-2371↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9436)]