Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8426): Process ended prematurely: osmo-stp_10.42.42.5(pid=8426) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8426)]
Standard Output
---------------------------------------------- trial-2371 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:01:12.609124 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:12.620125 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:01:12.754182 tst cs_paging_gprs_active.py: using LAC 26660 07:01:12.887788 tst cs_paging_gprs_active.py: using RAC 140 07:01:13.023319 tst cs_paging_gprs_active.py: using CellId 26660 07:01:13.153168 tst cs_paging_gprs_active.py: using BVCI 26661 07:01:13.178991 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.190561 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.201836 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.213705 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.225448 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.237264 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.249208 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.260874 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:13.272760 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:01:13.393848 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:01:13.681212 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:01:13.812460 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:01:14.139020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8416): Launched 07:01:14.411221 run iperf3-srv_10.42.42.10(pid=8417): Launched 07:01:14.602435 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:01:14.732855 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:01:15.058732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8418): Launched 07:01:15.331094 run iperf3-srv_10.42.42.10(pid=8419): Launched 07:01:15.522459 tst cs_paging_gprs_active.py:38: start network... 07:01:15.652490 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:01:16.191862 run create_hlr_db(pid=8420): Launched 07:01:16.376616 bus /gobi_6: Setting Powered False 07:01:17.404083 run create_hlr_db(pid=8420): Terminated: ok {rc=0} 07:01:17.821761 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8422): Launched 07:01:18.137197 run osmo-hlr_10.42.42.2(pid=8423): Launched 07:01:18.249754 run osmo-stp_10.42.42.5: Starting osmo-stp 07:01:18.792638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8425): Launched 07:01:19.107214 run osmo-stp_10.42.42.5(pid=8426): Launched 07:01:19.221274 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:01:19.768141 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8428): Launched 07:01:19.879248 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:01:20.153495 run patchelf(pid=8429): Launched 07:01:20.335827 run osmo-stp_10.42.42.5(pid=8426): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8426)] 07:01:20.468936 run osmo-stp_10.42.42.5(pid=8426): stdout: | (launched: 2022-12-10_07:01:18.950663) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:01:20.602584 run osmo-stp_10.42.42.5(pid=8426): stderr: | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070119124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:01:20.731256 run osmo-stp_10.42.42.5(pid=8426): stdout: | (launched: 2022-12-10_07:01:18.950663) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:01:20.858940 run osmo-stp_10.42.42.5(pid=8426): stderr: | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070119124 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070119124 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070119125 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:01:21.007896 run patchelf(pid=8429): Terminating (SIGINT) 07:01:21.183831 run patchelf(pid=8429): Terminated: ok {rc=0} 07:01:21.215925 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8426): Process ended prematurely: osmo-stp_10.42.42.5(pid=8426) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8426)] [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:01:21.225042 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:01:21.286653 run osmo-hlr_10.42.42.2(pid=8423): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8423)] 07:01:21.336788 run osmo-hlr_10.42.42.2(pid=8423): stdout: | (launched: 2022-12-10_07:01:17.979761) 07:01:21.387632 run osmo-hlr_10.42.42.2(pid=8423): stderr: | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210070118158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210070118195 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210070118205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210070118205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210070118205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:01:21.431100 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8416): Terminating (SIGTERM) 07:01:21.472142 run iperf3-srv_10.42.42.10(pid=8417): Terminating (SIGTERM) 07:01:21.512891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8418): Terminating (SIGTERM) 07:01:21.553988 run iperf3-srv_10.42.42.10(pid=8419): Terminating (SIGTERM) 07:01:21.594998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8422): Terminating (SIGTERM) 07:01:21.635633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8425): Terminating (SIGTERM) 07:01:21.676535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8428): Terminating (SIGTERM) 07:01:21.686232 --- ParallelTerminationStrategy: PID 8416 died... 07:01:21.740724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8416): Terminated: ok {rc=0} 07:01:21.750773 --- ParallelTerminationStrategy: PID 8417 died... 07:01:21.805037 run iperf3-srv_10.42.42.10(pid=8417): Terminated {rc=256} 07:01:21.814829 --- ParallelTerminationStrategy: PID 8418 died... 07:01:21.869564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8418): Terminated: ok {rc=0} 07:01:21.879342 --- ParallelTerminationStrategy: PID 8419 died... 07:01:21.933100 run iperf3-srv_10.42.42.10(pid=8419): Terminated {rc=256} 07:01:21.943034 --- ParallelTerminationStrategy: PID 8422 died... 07:01:21.997272 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8422): Terminated: ok {rc=0} 07:01:22.007157 --- ParallelTerminationStrategy: PID 8425 died... 07:01:22.061337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8425): Terminated: ok {rc=0} 07:01:22.071286 --- ParallelTerminationStrategy: PID 8428 died... 07:01:22.125252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8428): Terminated: ok {rc=0} 07:01:22.215439 bus /gobi_0: Setting Powered False 07:01:23.319828 bus /gobi_0: Setting Powered False 07:01:24.432499 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8426): Process ended prematurely: osmo-stp_10.42.42.5(pid=8426) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8426)]