Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9920): Process ended prematurely: osmo-stp_10.42.42.5(pid=9920) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9920)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:18:34.612448 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:34.623202 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:18:34.777990 tst cs_paging_gprs_active.py: using LAC 26753 07:18:34.906050 tst cs_paging_gprs_active.py: using RAC 233 07:18:35.031761 tst cs_paging_gprs_active.py: using CellId 26753 07:18:35.155678 tst cs_paging_gprs_active.py: using BVCI 26754 07:18:35.180066 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.191405 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.202689 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.214569 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.226060 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.237688 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.250635 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.262440 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:18:35.273273 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:18:35.391412 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:18:35.665510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:18:35.788250 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:18:36.095206 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9910): Launched 07:18:36.349345 run iperf3-srv_10.42.42.10(pid=9911): Launched 07:18:36.528912 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:18:36.651816 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:18:36.957476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9912): Launched 07:18:37.211327 run iperf3-srv_10.42.42.10(pid=9913): Launched 07:18:37.390670 tst cs_paging_gprs_active.py:38: start network... 07:18:37.513295 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:18:37.977587 run create_hlr_db(pid=9914): Launched 07:18:38.147407 bus /gobi_6: Setting Powered False 07:18:39.168608 run create_hlr_db(pid=9914): Terminated: ok {rc=0} 07:18:39.561105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9916): Launched 07:18:39.856847 run osmo-hlr_10.42.42.2(pid=9917): Launched 07:18:39.966533 run osmo-stp_10.42.42.5: Starting osmo-stp 07:18:40.479120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9919): Launched 07:18:40.776262 run osmo-stp_10.42.42.5(pid=9920): Launched 07:18:40.884834 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:18:41.398055 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9923): Launched 07:18:41.502949 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:18:41.761173 run patchelf(pid=9924): Launched 07:18:41.934401 run osmo-stp_10.42.42.5(pid=9920): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9920)] 07:18:42.061126 run osmo-stp_10.42.42.5(pid=9920): stdout: | (launched: 2022-12-10_07:18:40.628770) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:18:42.188271 run osmo-stp_10.42.42.5(pid=9920): stderr: | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071840799 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:18:42.311249 run osmo-stp_10.42.42.5(pid=9920): stdout: | (launched: 2022-12-10_07:18:40.628770) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:18:42.432508 run osmo-stp_10.42.42.5(pid=9920): stderr: | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071840798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071840799 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071840799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:18:42.574616 run patchelf(pid=9924): Terminating (SIGINT) 07:18:42.742271 run patchelf(pid=9924): Terminated: ok {rc=0} 07:18:42.773130 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9920): Process ended prematurely: osmo-stp_10.42.42.5(pid=9920) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9920)] [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:18:42.782033 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 07:18:42.842161 run osmo-hlr_10.42.42.2(pid=9917): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9917)] 07:18:42.891083 run osmo-hlr_10.42.42.2(pid=9917): stdout: | (launched: 2022-12-10_07:18:39.711220) 07:18:42.940428 run osmo-hlr_10.42.42.2(pid=9917): stderr: | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071839885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071839897 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071839906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071839906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071839906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:18:42.982206 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9910): Terminating (SIGTERM) 07:18:43.021912 run iperf3-srv_10.42.42.10(pid=9911): Terminating (SIGTERM) 07:18:43.061585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9912): Terminating (SIGTERM) 07:18:43.101098 run iperf3-srv_10.42.42.10(pid=9913): Terminating (SIGTERM) 07:18:43.140671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9916): Terminating (SIGTERM) 07:18:43.180171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9919): Terminating (SIGTERM) 07:18:43.219819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9923): Terminating (SIGTERM) 07:18:43.229207 --- ParallelTerminationStrategy: PID 9910 died... 07:18:43.282172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9910): Terminated: ok {rc=0} 07:18:43.291852 --- ParallelTerminationStrategy: PID 9911 died... 07:18:43.344110 run iperf3-srv_10.42.42.10(pid=9911): Terminated {rc=256} 07:18:43.353709 --- ParallelTerminationStrategy: PID 9912 died... 07:18:43.406363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9912): Terminated: ok {rc=0} 07:18:43.416045 --- ParallelTerminationStrategy: PID 9913 died... 07:18:43.468317 run iperf3-srv_10.42.42.10(pid=9913): Terminated {rc=256} 07:18:43.477958 --- ParallelTerminationStrategy: PID 9916 died... 07:18:43.530347 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9916): Terminated: ok {rc=0} 07:18:43.539937 --- ParallelTerminationStrategy: PID 9919 died... 07:18:43.592288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9919): Terminated: ok {rc=0} 07:18:43.601900 --- ParallelTerminationStrategy: PID 9923 died... 07:18:43.654513 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9923): Terminated: ok {rc=0} 07:18:43.737992 bus /gobi_0: Setting Powered False 07:18:44.839451 bus /gobi_0: Setting Powered False 07:18:45.965935 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9920): Process ended prematurely: osmo-stp_10.42.42.5(pid=9920) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9920)]