Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9972): Process ended prematurely: osmo-stp_10.42.42.5(pid=9972) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9972)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-b200+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 07:19:24.156872 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.169223 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:19:24.329618 tst ping_idle_ping.py: using LAC 26757 07:19:24.453901 tst ping_idle_ping.py: using RAC 237 07:19:24.578281 tst ping_idle_ping.py: using CellId 26757 07:19:24.702540 tst ping_idle_ping.py: using BVCI 26758 07:19:24.726700 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.738036 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.749348 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.760428 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.771507 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.782648 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.793856 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:24.804829 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:19:25.091275 tst ping_idle_ping.py:24: start network... 07:19:25.222201 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:19:25.729052 run create_hlr_db(pid=9966): Launched 07:19:25.910610 bus /gobi_6: Setting Powered False 07:19:26.932084 run create_hlr_db(pid=9966): Terminated: ok {rc=0} 07:19:27.324296 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9968): Launched 07:19:27.624568 run osmo-hlr_10.42.42.2(pid=9969): Launched 07:19:27.740770 run osmo-stp_10.42.42.5: Starting osmo-stp 07:19:28.283471 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9971): Launched 07:19:28.595554 run osmo-stp_10.42.42.5(pid=9972): Launched 07:19:28.708858 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:19:29.252414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9974): Launched 07:19:29.363858 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:19:29.635621 run patchelf(pid=9975): Launched 07:19:29.818739 run osmo-stp_10.42.42.5(pid=9972): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9972)] 07:19:29.952430 run osmo-stp_10.42.42.5(pid=9972): stdout: | (launched: 2022-12-10_07:19:28.442127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:30.086863 run osmo-stp_10.42.42.5(pid=9972): stderr: | �[0;m�[38;5;43m20221210071928633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071928633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071928634 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071928634 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:30.216355 run osmo-stp_10.42.42.5(pid=9972): stdout: | (launched: 2022-12-10_07:19:28.442127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:30.344597 run osmo-stp_10.42.42.5(pid=9972): stderr: | �[0;m�[38;5;43m20221210071928633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071928633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071928634 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071928634 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071928634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:30.493921 run patchelf(pid=9975): Terminating (SIGINT) 07:19:30.670098 run patchelf(pid=9975): Terminated: ok {rc=0} 07:19:30.702004 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9972): Process ended prematurely: osmo-stp_10.42.42.5(pid=9972) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9972)] [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 07:19:30.710941 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 07:19:30.773220 run osmo-hlr_10.42.42.2(pid=9969): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9969)] 07:19:30.824422 run osmo-hlr_10.42.42.2(pid=9969): stdout: | (launched: 2022-12-10_07:19:27.471789) 07:19:30.900661 run osmo-hlr_10.42.42.2(pid=9969): stderr: | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071927664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071927676 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071927684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071927684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071927685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:19:30.946058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9968): Terminating (SIGTERM) 07:19:30.988918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9971): Terminating (SIGTERM) 07:19:31.032490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9974): Terminating (SIGTERM) 07:19:31.043162 --- ParallelTerminationStrategy: PID 9968 died... 07:19:31.101435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9968): Terminated: ok {rc=0} 07:19:31.112520 --- ParallelTerminationStrategy: PID 9971 died... 07:19:31.168764 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9971): Terminated: ok {rc=0} 07:19:31.179227 --- ParallelTerminationStrategy: PID 9974 died... 07:19:31.235354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9974): Terminated: ok {rc=0} 07:19:31.324120 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9972): Process ended prematurely: osmo-stp_10.42.42.5(pid=9972) [trial-2371↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9972)]