Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11494): Process ended prematurely: osmo-stp_10.42.42.5(pid=11494) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11494)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 07:29:11.788210 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:11.799632 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:29:11.955325 tst ping_idle_ping.py: using LAC 26809 07:29:12.070814 tst ping_idle_ping.py: using RAC 34 07:29:12.186789 tst ping_idle_ping.py: using CellId 26809 07:29:12.299855 tst ping_idle_ping.py: using BVCI 26810 07:29:12.321953 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.332711 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.343504 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.354516 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.365877 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.376791 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.387663 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:12.398262 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:29:12.668273 tst ping_idle_ping.py:24: start network... 07:29:12.788795 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:29:13.250166 run create_hlr_db(pid=11487): Launched 07:29:13.417803 bus /gobi_6: Setting Powered False 07:29:14.439244 run create_hlr_db(pid=11487): Terminated: ok {rc=0} 07:29:14.828187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11490): Launched 07:29:15.118449 run osmo-hlr_10.42.42.2(pid=11491): Launched 07:29:15.224109 run osmo-stp_10.42.42.5: Starting osmo-stp 07:29:15.727009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11493): Launched 07:29:16.205682 run osmo-stp_10.42.42.5(pid=11494): Launched 07:29:16.468211 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:29:17.168454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11496): Launched 07:29:17.303797 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:29:17.559731 run patchelf(pid=11497): Launched 07:29:17.729747 run osmo-stp_10.42.42.5(pid=11494): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11494)] 07:29:17.854312 run osmo-stp_10.42.42.5(pid=11494): stdout: | (launched: 2022-12-10_07:29:15.885210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:17.979244 run osmo-stp_10.42.42.5(pid=11494): stderr: | �[0;m�[38;5;43m20221210072916200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072916200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072916201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072916202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072916207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072916208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072916208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:18.099489 run osmo-stp_10.42.42.5(pid=11494): stdout: | (launched: 2022-12-10_07:29:15.885210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:18.218780 run osmo-stp_10.42.42.5(pid=11494): stderr: | �[0;m�[38;5;43m20221210072916200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072916200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072916201 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072916202 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072916207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072916208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072916208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:18.358658 run patchelf(pid=11497): Terminating (SIGINT) 07:29:18.523575 run patchelf(pid=11497): Terminated: ok {rc=0} 07:29:18.553602 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11494): Process ended prematurely: osmo-stp_10.42.42.5(pid=11494) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11494)] [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 07:29:18.562048 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 07:29:18.621277 run osmo-hlr_10.42.42.2(pid=11491): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11491)] 07:29:18.669699 run osmo-hlr_10.42.42.2(pid=11491): stdout: | (launched: 2022-12-10_07:29:14.975340) 07:29:18.719188 run osmo-hlr_10.42.42.2(pid=11491): stderr: | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210072915147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210072915160 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210072915168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210072915169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210072915169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:29:18.761388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11490): Terminating (SIGTERM) 07:29:18.801112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11493): Terminating (SIGTERM) 07:29:18.840856 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11496): Terminating (SIGTERM) 07:29:18.850418 --- ParallelTerminationStrategy: PID 11490 died... 07:29:18.903405 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11490): Terminated: ok {rc=0} 07:29:18.913087 --- ParallelTerminationStrategy: PID 11493 died... 07:29:18.965439 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11493): Terminated: ok {rc=0} 07:29:18.975026 --- ParallelTerminationStrategy: PID 11496 died... 07:29:19.027765 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11496): Terminated: ok {rc=0} 07:29:19.110411 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11494): Process ended prematurely: osmo-stp_10.42.42.5(pid=11494) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11494)]