Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11307): Process ended prematurely: osmo-stp_10.42.42.5(pid=11307) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11307)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:26:23.612070 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:23.623630 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:26:23.767254 tst cs_paging_gprs_active.py: using LAC 26795 07:26:23.894780 tst cs_paging_gprs_active.py: using RAC 20 07:26:24.017362 tst cs_paging_gprs_active.py: using CellId 26795 07:26:24.139596 tst cs_paging_gprs_active.py: using BVCI 26796 07:26:24.163844 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.175228 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.186514 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.197814 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.208927 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.220249 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.231789 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.242935 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:26:24.254372 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:26:24.374579 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:26:24.648491 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:26:24.771549 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:26:25.077830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11297): Launched 07:26:25.330853 run iperf3-srv_10.42.42.10(pid=11298): Launched 07:26:25.511002 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:26:25.633428 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:26:25.939334 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11299): Launched 07:26:26.192813 run iperf3-srv_10.42.42.10(pid=11300): Launched 07:26:26.372867 tst cs_paging_gprs_active.py:38: start network... 07:26:26.495431 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:26:26.960878 run create_hlr_db(pid=11301): Launched 07:26:27.131217 bus /gobi_6: Setting Powered False 07:26:28.153557 run create_hlr_db(pid=11301): Terminated: ok {rc=0} 07:26:28.547177 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11303): Launched 07:26:28.866775 run osmo-hlr_10.42.42.2(pid=11304): Launched 07:26:28.984023 run osmo-stp_10.42.42.5: Starting osmo-stp 07:26:29.535104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11306): Launched 07:26:29.852892 run osmo-stp_10.42.42.5(pid=11307): Launched 07:26:29.968579 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:26:30.521398 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11309): Launched 07:26:30.634511 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:26:30.928144 run patchelf(pid=11310): Launched 07:26:31.117361 run osmo-stp_10.42.42.5(pid=11307): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11307)] 07:26:31.255484 run osmo-stp_10.42.42.5(pid=11307): stdout: | (launched: 2022-12-10_07:26:29.696843) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:26:31.394924 run osmo-stp_10.42.42.5(pid=11307): stderr: | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072629891 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:26:31.529821 run osmo-stp_10.42.42.5(pid=11307): stdout: | (launched: 2022-12-10_07:26:29.696843) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:26:31.662856 run osmo-stp_10.42.42.5(pid=11307): stderr: | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072629890 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072629891 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072629891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:26:31.818817 run patchelf(pid=11310): Terminating (SIGINT) 07:26:31.999779 run patchelf(pid=11310): Terminated: ok {rc=0} 07:26:32.033250 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11307): Process ended prematurely: osmo-stp_10.42.42.5(pid=11307) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11307)] [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:26:32.043664 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 07:26:32.109065 run osmo-hlr_10.42.42.2(pid=11304): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11304)] 07:26:32.161039 run osmo-hlr_10.42.42.2(pid=11304): stdout: | (launched: 2022-12-10_07:26:28.709112) 07:26:32.211855 run osmo-hlr_10.42.42.2(pid=11304): stderr: | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210072628904 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210072628917 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210072628925 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210072628926 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210072628926 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:26:32.254161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11297): Terminating (SIGTERM) 07:26:32.294997 run iperf3-srv_10.42.42.10(pid=11298): Terminating (SIGTERM) 07:26:32.335239 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11299): Terminating (SIGTERM) 07:26:32.375638 run iperf3-srv_10.42.42.10(pid=11300): Terminating (SIGTERM) 07:26:32.415685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11303): Terminating (SIGTERM) 07:26:32.455949 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11306): Terminating (SIGTERM) 07:26:32.496056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11309): Terminating (SIGTERM) 07:26:32.505574 --- ParallelTerminationStrategy: PID 11297 died... 07:26:32.559649 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11297): Terminated: ok {rc=0} 07:26:32.569663 --- ParallelTerminationStrategy: PID 11298 died... 07:26:32.623286 run iperf3-srv_10.42.42.10(pid=11298): Terminated {rc=256} 07:26:32.633139 --- ParallelTerminationStrategy: PID 11299 died... 07:26:32.686945 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11299): Terminated: ok {rc=0} 07:26:32.696517 --- ParallelTerminationStrategy: PID 11300 died... 07:26:32.750318 run iperf3-srv_10.42.42.10(pid=11300): Terminated {rc=256} 07:26:32.759977 --- ParallelTerminationStrategy: PID 11303 died... 07:26:32.814268 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11303): Terminated: ok {rc=0} 07:26:32.824030 --- ParallelTerminationStrategy: PID 11306 died... 07:26:32.877758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11306): Terminated: ok {rc=0} 07:26:32.887297 --- ParallelTerminationStrategy: PID 11309 died... 07:26:32.941112 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11309): Terminated: ok {rc=0} 07:26:33.029890 bus /gobi_0: Setting Powered False 07:26:34.133410 bus /gobi_0: Setting Powered False 07:26:35.243997 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11307): Process ended prematurely: osmo-stp_10.42.42.5(pid=11307) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11307)]