Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=28113): Process ended prematurely: osmo-stp_10.42.42.5(pid=28113) [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28113)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 10:19:20.771402 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:20.782276 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 10:19:20.916338 tst cs_paging_gprs_active.py: using LAC 27712 10:19:21.033657 tst cs_paging_gprs_active.py: using RAC 172 10:19:21.150955 tst cs_paging_gprs_active.py: using CellId 27712 10:19:21.274518 tst cs_paging_gprs_active.py: using BVCI 27713 10:19:21.297647 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.308265 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.318765 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.329268 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.339600 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.350033 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.360537 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.370927 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 10:19:21.381504 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 10:19:21.500861 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 10:19:21.780396 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:19:21.905783 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:19:22.220083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28103): Launched 10:19:22.480682 run iperf3-srv_10.42.42.10(pid=28104): Launched 10:19:22.665423 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:19:22.795092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:19:23.131607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28105): Launched 10:19:23.410119 run iperf3-srv_10.42.42.10(pid=28106): Launched 10:19:23.608799 tst cs_paging_gprs_active.py:38: start network... 10:19:23.744191 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:19:24.254116 run create_hlr_db(pid=28107): Launched 10:19:24.441917 bus /sierra_2: Setting Powered False 10:19:25.462643 run create_hlr_db(pid=28107): Terminated: ok {rc=0} 10:19:25.871363 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28109): Launched 10:19:26.175284 run osmo-hlr_10.42.42.2(pid=28110): Launched 10:19:26.286841 run osmo-stp_10.42.42.5: Starting osmo-stp 10:19:26.811769 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28112): Launched 10:19:27.116036 run osmo-stp_10.42.42.5(pid=28113): Launched 10:19:27.226740 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:19:27.757174 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28115): Launched 10:19:27.865343 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:19:28.129533 run patchelf(pid=28116): Launched 10:19:28.306709 run osmo-stp_10.42.42.5(pid=28113): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28113)] 10:19:28.436529 run osmo-stp_10.42.42.5(pid=28113): stdout: | (launched: 2022-12-10_10:19:26.966332) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:28.566372 run osmo-stp_10.42.42.5(pid=28113): stderr: | �[0;m�[38;5;43m20221210101927137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101927138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101927138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101927138 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:28.691444 run osmo-stp_10.42.42.5(pid=28113): stdout: | (launched: 2022-12-10_10:19:26.966332) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:28.815449 run osmo-stp_10.42.42.5(pid=28113): stderr: | �[0;m�[38;5;43m20221210101927137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101927138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101927138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101927138 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101927139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:28.960481 run patchelf(pid=28116): Terminating (SIGINT) 10:19:29.131198 run patchelf(pid=28116): Terminated: ok {rc=0} 10:19:29.162627 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28113): Process ended prematurely: osmo-stp_10.42.42.5(pid=28113) [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28113)] [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 10:19:29.171757 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 10:19:29.231180 run osmo-hlr_10.42.42.2(pid=28110): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28110)] 10:19:29.279744 run osmo-hlr_10.42.42.2(pid=28110): stdout: | (launched: 2022-12-10_10:19:26.026074) 10:19:29.328873 run osmo-hlr_10.42.42.2(pid=28110): stderr: | �[0;m�[1;31m20221210101926203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210101926203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210101926203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210101926203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210101926203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210101926204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210101926216 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210101926226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210101926227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210101926227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:19:29.370968 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28103): Terminating (SIGTERM) 10:19:29.410513 run iperf3-srv_10.42.42.10(pid=28104): Terminating (SIGTERM) 10:19:29.450057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28105): Terminating (SIGTERM) 10:19:29.489697 run iperf3-srv_10.42.42.10(pid=28106): Terminating (SIGTERM) 10:19:29.529278 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28109): Terminating (SIGTERM) 10:19:29.568676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28112): Terminating (SIGTERM) 10:19:29.608354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28115): Terminating (SIGTERM) 10:19:29.617570 --- ParallelTerminationStrategy: PID 28103 died... 10:19:29.670555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28103): Terminated: ok {rc=0} 10:19:29.679962 --- ParallelTerminationStrategy: PID 28104 died... 10:19:29.732345 run iperf3-srv_10.42.42.10(pid=28104): Terminated {rc=256} 10:19:29.741748 --- ParallelTerminationStrategy: PID 28105 died... 10:19:29.794801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28105): Terminated: ok {rc=0} 10:19:29.804392 --- ParallelTerminationStrategy: PID 28106 died... 10:19:29.857138 run iperf3-srv_10.42.42.10(pid=28106): Terminated {rc=256} 10:19:29.866666 --- ParallelTerminationStrategy: PID 28109 died... 10:19:29.918949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28109): Terminated: ok {rc=0} 10:19:29.928409 --- ParallelTerminationStrategy: PID 28112 died... 10:19:29.981051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28112): Terminated: ok {rc=0} 10:19:29.990733 --- ParallelTerminationStrategy: PID 28115 died... 10:19:30.043514 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28115): Terminated: ok {rc=0} 10:19:30.132262 bus /gobi_0: Setting Powered False 10:19:31.254615 bus /gobi_0: Setting Powered False 10:19:32.361356 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28113): Process ended prematurely: osmo-stp_10.42.42.5(pid=28113) [trial-2373↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28113)]