Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=31882): Process ended prematurely: osmo-stp_10.42.42.5(pid=31882) [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31882)]
Standard Output
---------------------------------------------- trial-2382 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 21:51:10.626161 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:10.638852 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:51:10.779492 tst iperf3.py: using LAC 31734 21:51:10.900284 tst iperf3.py: using RAC 114 21:51:11.020393 tst iperf3.py: using CellId 31734 21:51:11.141708 tst iperf3.py: using BVCI 31735 21:51:11.165205 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.176440 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.187531 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.198673 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.209741 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.220818 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.231971 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.242935 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:51:11.254179 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:51:11.551818 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:51:11.689039 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:51:12.026635 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31874): Launched 21:51:12.307113 run iperf3-srv_10.42.42.10(pid=31875): Launched 21:51:12.507939 tst iperf3.py:8: start network... 21:51:12.645551 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:51:13.170279 run create_hlr_db(pid=31876): Launched 21:51:13.360480 bus /gobi_6: Setting Powered False 21:51:14.382276 run create_hlr_db(pid=31876): Terminated: ok {rc=0} 21:51:14.793245 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31878): Launched 21:51:15.099692 run osmo-hlr_10.42.42.2(pid=31879): Launched 21:51:15.216589 run osmo-stp_10.42.42.5: Starting osmo-stp 21:51:15.752333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31881): Launched 21:51:16.220167 run osmo-stp_10.42.42.5(pid=31882): Launched 21:51:16.513937 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:51:17.136339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31884): Launched 21:51:17.258802 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:51:17.547720 run patchelf(pid=31885): Launched 21:51:17.739819 run osmo-stp_10.42.42.5(pid=31882): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31882)] 21:51:17.880800 run osmo-stp_10.42.42.5(pid=31882): stdout: | (launched: 2022-12-12_21:51:15.927990) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:51:18.021841 run osmo-stp_10.42.42.5(pid=31882): stderr: | �[0;m�[38;5;43m20221212215116383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212215116383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212215116384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212215116384 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:51:18.158303 run osmo-stp_10.42.42.5(pid=31882): stdout: | (launched: 2022-12-12_21:51:15.927990) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:51:18.293560 run osmo-stp_10.42.42.5(pid=31882): stderr: | �[0;m�[38;5;43m20221212215116383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212215116383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212215116384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212215116384 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212215116385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:51:18.451238 run patchelf(pid=31885): Terminating (SIGINT) 21:51:18.636177 run patchelf(pid=31885): Terminated: ok {rc=0} 21:51:18.670404 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31882): Process ended prematurely: osmo-stp_10.42.42.5(pid=31882) [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31882)] [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 21:51:18.680381 tst iperf3.py:8: Test FAILED (8.1 sec) 21:51:18.744484 run osmo-hlr_10.42.42.2(pid=31879): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31879)] 21:51:18.797159 run osmo-hlr_10.42.42.2(pid=31879): stdout: | (launched: 2022-12-12_21:51:14.949403) 21:51:18.850979 run osmo-hlr_10.42.42.2(pid=31879): stderr: | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212215115126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212215115142 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212215115152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212215115152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212215115152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:51:18.896386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31874): Terminating (SIGTERM) 21:51:18.939107 run iperf3-srv_10.42.42.10(pid=31875): Terminating (SIGTERM) 21:51:18.981798 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31878): Terminating (SIGTERM) 21:51:19.024475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31881): Terminating (SIGTERM) 21:51:19.067852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31884): Terminating (SIGTERM) 21:51:19.077932 --- ParallelTerminationStrategy: PID 31874 died... 21:51:19.134860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31874): Terminated: ok {rc=0} 21:51:19.145182 --- ParallelTerminationStrategy: PID 31875 died... 21:51:19.201449 run iperf3-srv_10.42.42.10(pid=31875): Terminated {rc=256} 21:51:19.211808 --- ParallelTerminationStrategy: PID 31878 died... 21:51:19.268360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31878): Terminated: ok {rc=0} 21:51:19.278821 --- ParallelTerminationStrategy: PID 31881 died... 21:51:19.335460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31881): Terminated: ok {rc=0} 21:51:19.345935 --- ParallelTerminationStrategy: PID 31884 died... 21:51:19.402503 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31884): Terminated: ok {rc=0} 21:51:19.491142 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31882): Process ended prematurely: osmo-stp_10.42.42.5(pid=31882) [trial-2382↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31882)]