Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7537): Process ended prematurely: osmo-stp_10.42.42.5(pid=7537) [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7537)]
Standard Output
---------------------------------------------- trial-2388 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:11:54.243046 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.254295 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:11:54.389875 tst cs_paging_gprs_active.py: using LAC 33228 10:11:54.523309 tst cs_paging_gprs_active.py: using RAC 78 10:11:54.655861 tst cs_paging_gprs_active.py: using CellId 33228 10:11:54.789895 tst cs_paging_gprs_active.py: using BVCI 33229 10:11:54.815790 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.827120 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.838233 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.849288 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.860502 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.872031 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.883716 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.895136 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:11:54.906830 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:11:55.028368 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:11:55.334760 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:11:55.476248 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:11:55.825945 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7527): Launched 10:11:56.116777 run iperf3-srv_10.42.42.10(pid=7528): Launched 10:11:56.323684 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:11:56.465101 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:11:56.815628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7529): Launched 10:11:57.107006 run iperf3-srv_10.42.42.10(pid=7530): Launched 10:11:57.314347 tst cs_paging_gprs_active.py:38: start network... 10:11:57.456188 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:11:57.988847 run create_hlr_db(pid=7531): Launched 10:11:58.184118 bus /gobi_6: Setting Powered False 10:11:59.205135 run create_hlr_db(pid=7531): Terminated: ok {rc=0} 10:11:59.628717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7533): Launched 10:11:59.944303 run osmo-hlr_10.42.42.2(pid=7534): Launched 10:12:00.068884 run osmo-stp_10.42.42.5: Starting osmo-stp 10:12:00.617096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7536): Launched 10:12:01.060697 run osmo-stp_10.42.42.5(pid=7537): Launched 10:12:01.208275 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:12:01.818487 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7539): Launched 10:12:01.932641 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:12:02.226663 run patchelf(pid=7540): Launched 10:12:02.410875 run osmo-stp_10.42.42.5(pid=7537): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7537)] 10:12:02.545540 run osmo-stp_10.42.42.5(pid=7537): stdout: | (launched: 2022-12-13_10:12:00.776262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:12:02.679124 run osmo-stp_10.42.42.5(pid=7537): stderr: | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101201003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:12:02.808335 run osmo-stp_10.42.42.5(pid=7537): stdout: | (launched: 2022-12-13_10:12:00.776262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:12:02.936635 run osmo-stp_10.42.42.5(pid=7537): stderr: | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101201003 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101201003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101201004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:12:03.086665 run patchelf(pid=7540): Terminating (SIGINT) 10:12:03.263569 run patchelf(pid=7540): Terminated: ok {rc=0} 10:12:03.295699 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7537): Process ended prematurely: osmo-stp_10.42.42.5(pid=7537) [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7537)] [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:12:03.304920 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 10:12:03.365937 run osmo-hlr_10.42.42.2(pid=7534): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7534)] 10:12:03.416355 run osmo-hlr_10.42.42.2(pid=7534): stdout: | (launched: 2022-12-13_10:11:59.787976) 10:12:03.466692 run osmo-hlr_10.42.42.2(pid=7534): stderr: | �[0;m�[1;31m20221213101159967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213101159968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213101159968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213101159968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213101159968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213101159968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213101159980 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213101159988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213101159989 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213101159989 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:12:03.509822 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7527): Terminating (SIGTERM) 10:12:03.550394 run iperf3-srv_10.42.42.10(pid=7528): Terminating (SIGTERM) 10:12:03.590928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7529): Terminating (SIGTERM) 10:12:03.631194 run iperf3-srv_10.42.42.10(pid=7530): Terminating (SIGTERM) 10:12:03.671499 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7533): Terminating (SIGTERM) 10:12:03.711825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7536): Terminating (SIGTERM) 10:12:03.752167 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7539): Terminating (SIGTERM) 10:12:03.761588 --- ParallelTerminationStrategy: PID 7527 died... 10:12:03.815607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7527): Terminated: ok {rc=0} 10:12:03.825343 --- ParallelTerminationStrategy: PID 7528 died... 10:12:03.878692 run iperf3-srv_10.42.42.10(pid=7528): Terminated {rc=256} 10:12:03.888220 --- ParallelTerminationStrategy: PID 7529 died... 10:12:03.941382 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7529): Terminated: ok {rc=0} 10:12:03.950933 --- ParallelTerminationStrategy: PID 7530 died... 10:12:04.004100 run iperf3-srv_10.42.42.10(pid=7530): Terminated {rc=256} 10:12:04.013682 --- ParallelTerminationStrategy: PID 7533 died... 10:12:04.067086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7533): Terminated: ok {rc=0} 10:12:04.076685 --- ParallelTerminationStrategy: PID 7536 died... 10:12:04.130521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7536): Terminated: ok {rc=0} 10:12:04.140245 --- ParallelTerminationStrategy: PID 7539 died... 10:12:04.193664 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7539): Terminated: ok {rc=0} 10:12:04.283648 bus /gobi_0: Setting Powered False 10:12:05.389918 bus /gobi_0: Setting Powered False 10:12:06.502934 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7537): Process ended prematurely: osmo-stp_10.42.42.5(pid=7537) [trial-2388↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7537)]