Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=8902): Process ended prematurely: osmo-stp_10.42.42.5(pid=8902) [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8902)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 10:27:39.529914 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:39.540942 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:27:39.687981 tst cs_paging_gprs_active.py: using LAC 33311 10:27:39.816233 tst cs_paging_gprs_active.py: using RAC 161 10:27:39.938931 tst cs_paging_gprs_active.py: using CellId 33311 10:27:40.063139 tst cs_paging_gprs_active.py: using BVCI 33312 10:27:40.087455 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.098311 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.108855 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.119385 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.130220 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.141136 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.152184 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.163070 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:40.174294 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:27:40.298141 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:27:40.602824 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:27:40.743631 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:27:41.092133 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8892): Launched 10:27:41.383278 run iperf3-srv_10.42.42.10(pid=8893): Launched 10:27:41.589623 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:27:41.729737 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:27:42.078744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8894): Launched 10:27:42.367732 run iperf3-srv_10.42.42.10(pid=8895): Launched 10:27:42.573602 tst cs_paging_gprs_active.py:38: start network... 10:27:42.713727 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:27:43.243125 run create_hlr_db(pid=8896): Launched 10:27:43.435735 bus /sierra_2: Setting Powered False 10:27:44.458263 run create_hlr_db(pid=8896): Terminated: ok {rc=0} 10:27:44.906117 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8898): Launched 10:27:45.243678 run osmo-hlr_10.42.42.2(pid=8899): Launched 10:27:45.366916 run osmo-stp_10.42.42.5: Starting osmo-stp 10:27:45.961492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8901): Launched 10:27:46.324738 run osmo-stp_10.42.42.5(pid=8902): Launched 10:27:46.502795 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:27:47.155380 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8904): Launched 10:27:47.271119 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:27:47.550097 run patchelf(pid=8905): Launched 10:27:47.732635 run osmo-stp_10.42.42.5(pid=8902): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8902)] 10:27:47.865827 run osmo-stp_10.42.42.5(pid=8902): stdout: | (launched: 2022-12-13_10:27:46.125215) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:47.998863 run osmo-stp_10.42.42.5(pid=8902): stderr: | �[0;m�[38;5;43m20221213102746459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102746460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102746460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102746460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:48.127648 run osmo-stp_10.42.42.5(pid=8902): stdout: | (launched: 2022-12-13_10:27:46.125215) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:48.255318 run osmo-stp_10.42.42.5(pid=8902): stderr: | �[0;m�[38;5;43m20221213102746459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102746460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102746460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102746460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102746473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:48.404735 run patchelf(pid=8905): Terminating (SIGINT) 10:27:48.580596 run patchelf(pid=8905): Terminated: ok {rc=0} 10:27:48.612859 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8902): Process ended prematurely: osmo-stp_10.42.42.5(pid=8902) [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8902)] [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 10:27:48.622266 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 10:27:48.682585 run osmo-hlr_10.42.42.2(pid=8899): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8899)] 10:27:48.731971 run osmo-hlr_10.42.42.2(pid=8899): stdout: | (launched: 2022-12-13_10:27:45.075944) 10:27:48.781883 run osmo-hlr_10.42.42.2(pid=8899): stderr: | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102745273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102745286 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102745294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102745294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102745294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:27:48.824422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8892): Terminating (SIGTERM) 10:27:48.864603 run iperf3-srv_10.42.42.10(pid=8893): Terminating (SIGTERM) 10:27:48.905699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8894): Terminating (SIGTERM) 10:27:48.946309 run iperf3-srv_10.42.42.10(pid=8895): Terminating (SIGTERM) 10:27:48.987014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8898): Terminating (SIGTERM) 10:27:49.026874 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8901): Terminating (SIGTERM) 10:27:49.066733 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8904): Terminating (SIGTERM) 10:27:49.075943 --- ParallelTerminationStrategy: PID 8892 died... 10:27:49.129690 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8892): Terminated: ok {rc=0} 10:27:49.139247 --- ParallelTerminationStrategy: PID 8893 died... 10:27:49.192290 run iperf3-srv_10.42.42.10(pid=8893): Terminated {rc=256} 10:27:49.201859 --- ParallelTerminationStrategy: PID 8894 died... 10:27:49.255173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8894): Terminated: ok {rc=0} 10:27:49.264729 --- ParallelTerminationStrategy: PID 8895 died... 10:27:49.317891 run iperf3-srv_10.42.42.10(pid=8895): Terminated {rc=256} 10:27:49.327384 --- ParallelTerminationStrategy: PID 8898 died... 10:27:49.380570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8898): Terminated: ok {rc=0} 10:27:49.390148 --- ParallelTerminationStrategy: PID 8901 died... 10:27:49.443289 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8901): Terminated: ok {rc=0} 10:27:49.452842 --- ParallelTerminationStrategy: PID 8904 died... 10:27:49.506246 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8904): Terminated: ok {rc=0} 10:27:49.591345 bus /gobi_0: Setting Powered False 10:27:50.700356 bus /gobi_0: Setting Powered False 10:27:51.810953 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8902): Process ended prematurely: osmo-stp_10.42.42.5(pid=8902) [trial-2388↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8902)]