Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10586): Process ended prematurely: osmo-stp_10.42.42.5(pid=10586) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10586)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:48:01.424495 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:01.435865 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:48:01.631120 tst cs_paging_gprs_active.py: using LAC 33417 10:48:01.801749 tst cs_paging_gprs_active.py: using RAC 12 10:48:01.942228 tst cs_paging_gprs_active.py: using CellId 33417 10:48:02.072561 tst cs_paging_gprs_active.py: using BVCI 33418 10:48:02.099085 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.111542 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.123948 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.136599 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.150635 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.162927 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.177303 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.189863 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:48:02.203711 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:48:02.328785 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:48:02.630881 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:48:02.767353 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:48:03.106113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10576): Launched 10:48:03.387567 run iperf3-srv_10.42.42.10(pid=10577): Launched 10:48:03.587544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:48:03.724630 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:48:04.063025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10578): Launched 10:48:04.345471 run iperf3-srv_10.42.42.10(pid=10579): Launched 10:48:04.545130 tst cs_paging_gprs_active.py:38: start network... 10:48:04.681557 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:48:05.198146 run create_hlr_db(pid=10580): Launched 10:48:05.372546 bus /gobi_6: Setting Powered False 10:48:06.395189 run create_hlr_db(pid=10580): Terminated: ok {rc=0} 10:48:06.800260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10582): Launched 10:48:07.106538 run osmo-hlr_10.42.42.2(pid=10583): Launched 10:48:07.218178 run osmo-stp_10.42.42.5: Starting osmo-stp 10:48:07.744663 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10585): Launched 10:48:08.051484 run osmo-stp_10.42.42.5(pid=10586): Launched 10:48:08.161886 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:48:08.692593 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10588): Launched 10:48:08.800679 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:48:09.067730 run patchelf(pid=10589): Launched 10:48:09.245090 run osmo-stp_10.42.42.5(pid=10586): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10586)] 10:48:09.374456 run osmo-stp_10.42.42.5(pid=10586): stdout: | (launched: 2022-12-13_10:48:07.899079) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:48:09.503822 run osmo-stp_10.42.42.5(pid=10586): stderr: | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104808067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:48:09.629412 run osmo-stp_10.42.42.5(pid=10586): stdout: | (launched: 2022-12-13_10:48:07.899079) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:48:09.753504 run osmo-stp_10.42.42.5(pid=10586): stderr: | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104808066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104808067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104808067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:48:09.899191 run patchelf(pid=10589): Terminating (SIGINT) 10:48:10.069526 run patchelf(pid=10589): Terminated: ok {rc=0} 10:48:10.100882 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10586): Process ended prematurely: osmo-stp_10.42.42.5(pid=10586) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10586)] [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:48:10.110149 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:48:10.169759 run osmo-hlr_10.42.42.2(pid=10583): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10583)] 10:48:10.218624 run osmo-hlr_10.42.42.2(pid=10583): stdout: | (launched: 2022-12-13_10:48:06.954848) 10:48:10.268158 run osmo-hlr_10.42.42.2(pid=10583): stderr: | �[0;m�[1;31m20221213104807127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213104807128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213104807128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213104807128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213104807128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213104807128 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213104807140 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213104807148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213104807149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213104807149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:48:10.310112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10576): Terminating (SIGTERM) 10:48:10.349508 run iperf3-srv_10.42.42.10(pid=10577): Terminating (SIGTERM) 10:48:10.389049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10578): Terminating (SIGTERM) 10:48:10.428332 run iperf3-srv_10.42.42.10(pid=10579): Terminating (SIGTERM) 10:48:10.467951 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10582): Terminating (SIGTERM) 10:48:10.507377 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10585): Terminating (SIGTERM) 10:48:10.546846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10588): Terminating (SIGTERM) 10:48:10.555937 --- ParallelTerminationStrategy: PID 10576 died... 10:48:10.609590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10576): Terminated: ok {rc=0} 10:48:10.619024 --- ParallelTerminationStrategy: PID 10577 died... 10:48:10.671363 run iperf3-srv_10.42.42.10(pid=10577): Terminated {rc=256} 10:48:10.680690 --- ParallelTerminationStrategy: PID 10578 died... 10:48:10.733173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10578): Terminated: ok {rc=0} 10:48:10.742545 --- ParallelTerminationStrategy: PID 10579 died... 10:48:10.794823 run iperf3-srv_10.42.42.10(pid=10579): Terminated {rc=256} 10:48:10.804123 --- ParallelTerminationStrategy: PID 10582 died... 10:48:10.856785 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10582): Terminated: ok {rc=0} 10:48:10.866207 --- ParallelTerminationStrategy: PID 10585 died... 10:48:10.918822 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10585): Terminated: ok {rc=0} 10:48:10.928266 --- ParallelTerminationStrategy: PID 10588 died... 10:48:10.981513 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10588): Terminated: ok {rc=0} 10:48:11.069528 bus /gobi_0: Setting Powered False 10:48:12.174730 bus /gobi_0: Setting Powered False 10:48:13.286339 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10586): Process ended prematurely: osmo-stp_10.42.42.5(pid=10586) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10586)]