Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=22142): Process ended prematurely: osmo-stp_10.42.42.5(pid=22142) [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22142)]
Standard Output
---------------------------------------------- trial-2389 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 12:43:05.789173 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:05.800369 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 12:43:05.944171 tst cs_paging_gprs_active.py: using LAC 34023 12:43:06.071932 tst cs_paging_gprs_active.py: using RAC 108 12:43:06.199910 tst cs_paging_gprs_active.py: using CellId 34023 12:43:06.326206 tst cs_paging_gprs_active.py: using BVCI 34024 12:43:06.350905 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.362104 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.373009 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.383843 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.395047 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.406322 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.417774 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.428777 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:43:06.440057 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:43:06.556748 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:43:06.837350 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:43:06.962217 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:43:07.272825 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22132): Launched 12:43:07.531449 run iperf3-srv_10.42.42.10(pid=22133): Launched 12:43:07.713197 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:43:07.836744 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:43:08.147282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22134): Launched 12:43:08.405301 run iperf3-srv_10.42.42.10(pid=22135): Launched 12:43:08.587422 tst cs_paging_gprs_active.py:38: start network... 12:43:08.711445 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:43:09.193936 run create_hlr_db(pid=22136): Launched 12:43:09.366975 bus /sierra_2: Setting Powered False 12:43:10.387563 run create_hlr_db(pid=22136): Terminated: ok {rc=0} 12:43:10.788028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22138): Launched 12:43:11.087536 run osmo-hlr_10.42.42.2(pid=22139): Launched 12:43:11.196648 run osmo-stp_10.42.42.5: Starting osmo-stp 12:43:11.717299 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22141): Launched 12:43:12.016102 run osmo-stp_10.42.42.5(pid=22142): Launched 12:43:12.124391 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:43:12.647800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22144): Launched 12:43:12.754318 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:43:13.018662 run patchelf(pid=22145): Launched 12:43:13.197494 run osmo-stp_10.42.42.5(pid=22142): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22142)] 12:43:13.327938 run osmo-stp_10.42.42.5(pid=22142): stdout: | (launched: 2022-12-13_12:43:11.868508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:43:13.459301 run osmo-stp_10.42.42.5(pid=22142): stderr: | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124312038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124312038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124312038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124312039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:43:13.585146 run osmo-stp_10.42.42.5(pid=22142): stdout: | (launched: 2022-12-13_12:43:11.868508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:43:13.709727 run osmo-stp_10.42.42.5(pid=22142): stderr: | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124312037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124312038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124312038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124312038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124312039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:43:13.855303 run patchelf(pid=22145): Terminating (SIGINT) 12:43:14.026152 run patchelf(pid=22145): Terminated: ok {rc=0} 12:43:14.057613 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22142): Process ended prematurely: osmo-stp_10.42.42.5(pid=22142) [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22142)] [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 12:43:14.066988 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 12:43:14.126841 run osmo-hlr_10.42.42.2(pid=22139): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22139)] 12:43:14.175511 run osmo-hlr_10.42.42.2(pid=22139): stdout: | (launched: 2022-12-13_12:43:10.939893) 12:43:14.224789 run osmo-hlr_10.42.42.2(pid=22139): stderr: | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213124311113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213124311126 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213124311134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213124311135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213124311135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:43:14.266508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22132): Terminating (SIGTERM) 12:43:14.305957 run iperf3-srv_10.42.42.10(pid=22133): Terminating (SIGTERM) 12:43:14.345527 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22134): Terminating (SIGTERM) 12:43:14.384811 run iperf3-srv_10.42.42.10(pid=22135): Terminating (SIGTERM) 12:43:14.424207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22138): Terminating (SIGTERM) 12:43:14.463661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22141): Terminating (SIGTERM) 12:43:14.503146 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22144): Terminating (SIGTERM) 12:43:14.512363 --- ParallelTerminationStrategy: PID 22132 died... 12:43:14.565240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22132): Terminated: ok {rc=0} 12:43:14.574856 --- ParallelTerminationStrategy: PID 22133 died... 12:43:14.627650 run iperf3-srv_10.42.42.10(pid=22133): Terminated {rc=256} 12:43:14.637293 --- ParallelTerminationStrategy: PID 22134 died... 12:43:14.689935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22134): Terminated: ok {rc=0} 12:43:14.699425 --- ParallelTerminationStrategy: PID 22135 died... 12:43:14.751867 run iperf3-srv_10.42.42.10(pid=22135): Terminated {rc=256} 12:43:14.761400 --- ParallelTerminationStrategy: PID 22138 died... 12:43:14.813967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22138): Terminated: ok {rc=0} 12:43:14.823506 --- ParallelTerminationStrategy: PID 22141 died... 12:43:14.876352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22141): Terminated: ok {rc=0} 12:43:14.885926 --- ParallelTerminationStrategy: PID 22144 died... 12:43:14.938864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22144): Terminated: ok {rc=0} 12:43:15.022433 bus /gobi_0: Setting Powered False 12:43:16.131828 bus /gobi_0: Setting Powered False 12:43:17.243674 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22142): Process ended prematurely: osmo-stp_10.42.42.5(pid=22142) [trial-2389↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22142)]